- HOME
- POLYMER SEARCH
- Thermoset
- Rubber or Thermoset Elastomer (TSE)
- Dow Nordel® IP 4520 General Purpose Molding
Dow Nordel® IP 4520 General Purpose Molding
| Category | Polymer , Thermoset , Rubber or Thermoset Elastomer (TSE) |
| Manufacturer | Dow Chemical |
| Trade Name | Nordel® |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Dow Nordel® IP 4520 General Purpose Molding.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
FormulationNordel® IP 4520
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.156 g/cc | 0.04176 lb/in³ | |
| Mooney Viscosity | 33 @Temperature 100 °C |
33 @Temperature 212 °F |
ML 1 + 4 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore A | 66 | 66 | Vulcanizate, Press cured, TC95 +3min at 160°C |
| Tensile Strength, Ultimate | 7.60 MPa | 1100 psi | Vulcanizate, Press cured, TC95 +3min at 160°C |
| Elongation at Break | 460 % | 460 % | Vulcanizate, Press cured, TC95 +3min at 160°C |
| 100% Modulus | 0.00260 GPa | 0.377 ksi | Vulcanizate, Press cured, TC95 +3min at 160°C |
| 200% Modulus | 0.00470 GPa | 0.682 ksi | Vulcanizate, Press cured, TC95 +3min at 160°C |
| 300% Modulus | 0.00600 GPa | 0.870 ksi | Vulcanizate, Press cured, TC95 +3min at 160°C |
| Tear Strength | 31.8 kN/m | 181 pli | Die C, Vulcanizate, Press cured, TC95 +3min at 160°C |
| Compression Set | 81 % @Temperature 125 °C |
81 % @Temperature 257 °F |
Pellets cured MDR TC95 + 15 min at 160°C, 70 hr at 125°C; Method B |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Brittleness Temperature | -41.0 °C | -41.8 °F | Temperature Retraction, TR-10 |
Users viewing this material also viewed the following:
Copyright © lookpolymers.com All Rights Reserved