- HOME
- POLYMER SEARCH
- Thermoset
- Epoxy
- Epoxy, Cast, Metal Filled
- Devcon HVAC Repair (Special F) Epoxy
Devcon HVAC Repair (Special F) Epoxy
| Category | Polymer , Thermoset , Epoxy , Epoxy, Cast, Metal Filled |
| Manufacturer | Devcon |
| Trade Name | |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Devcon HVAC Repair (Special F) Epoxy.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
General Repair EpoxyComments: Aluminum-filled epoxy adhesive, conveniently packaged in two 6.5 oz. tubes. Bonds to aluminum and other metals, ceramics, wood, concrete or glass. Use as an adhesive for repairs to copper coils in compressors. Hardens to a rigid bond that can be ground, drilled or tapped. Fill voids or porosity in aluminum castings.Data provided by Ellsworth Adhesives.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.72 g/cc | 0.0621 lb/in³ | |
| Viscosity | 40000 cP | 40000 cP | with hardener |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore D | 85 | 85 | ASTM D2240 |
| Tensile Strength, Ultimate | 25.6 MPa | 3720 psi | ASTM D638 |
| Modulus of Elasticity | 5.38 GPa | 780 ksi | In Tension; ASTM D638 |
| Flexural Yield Strength | 43.2 MPa | 6260 psi | ASTM D790 |
| Compressive Yield Strength | 58.1 MPa | 8420 psi | ASTM D695 |
| Adhesive Bond Strength | 17.2 MPa | 2500 psi | Adhesive tensile shear strength; ASTM D1002 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 52.0 µm/m-°C @Temperature 20.0 °C |
28.9 µin/in-°F @Temperature 68.0 °F |
ASTM D696 |
| Thermal Conductivity | 0.724 W/m-K | 5.02 BTU-in/hr-ft²-°F | ASTM C177 |
| Maximum Service Temperature, Air | 121 °C | 250 °F | Operating Temperature |
| Shrinkage | 0.080 % | 0.080 % | During Cure; ASTM D2566 |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Dielectric Constant | 21.4 | 21.4 | ASTM D150 |
| Dielectric Strength | 3.94 kV/mm | 100 kV/in | ASTM D149 |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Processing Temperature | 21.1 °C | 70.0 °F | |
| Pot Life | 60.0 min @Temperature 23.9 °C |
60.0 min @Temperature 75.0 °F |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Coverage per lb. | 64 in² | at 1/4 inch thick |
| Mix Ratio by Volume | 1 to 1 | resin:hardener |
| Mix Ratio By Weight | 0.9 to 1 | resin:hardener |
Users viewing this material also viewed the following:
Copyright © lookpolymers.com All Rights Reserved