POLYMER SEARCH

DSM Arnitel® XG5858 TPC-ET

Category	Polymer , Thermoplastic , Elastomer, TPE , Polyester TPE , Polyester, TP
Manufacturer	DSM Engineering Plastics
Trade Name	Arnitel®
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	DSM Arnitel® XG5858 TPC-ET.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Injection Molding

Physical Properties	Metric	English	Comments
Density	1.10 g/cc	0.0397 lb/in³	ISO 1183
Water Absorption	0.16 %	0.16 %	Sim. To ISO 62
Moisture Absorption	0.450 %	0.450 %	Sim. To ISO 62
Melt Flow	13.8 g/10 min @Load 2.16 kg, Temperature 230 °C	13.8 g/10 min @Load 4.76 lb, Temperature 446 °F	cm<sup>3</sup>/10min Melt Volume-flow Rate; ISO 1133

Mechanical Properties	Metric	English	Comments
Hardness, Shore A	82 @Time 3.00 sec	82 @Time 0.000833 hour	ISO 868
Tensile Strength, Ultimate	8.80 MPa	1280 psi	ISO 527-1/-2
Tensile Stress	1.90 MPa @Strain 10.0 %	276 psi @Strain 10.0 %	ISO 527-1/-2
	4.10 MPa @Strain 100 %	595 psi @Strain 100 %	ISO 527-1/-2
Elongation at Break	550 %	550 %	ISO 527-1/-2
Tensile Modulus	0.0550 GPa	7.98 ksi	ISO 527-1/-2

Thermal Properties	Metric	English	Comments
Melting Point	180 °C	356 °F	10°C/min; ISO 11357-1/-3

Electrical Properties	Metric	English	Comments
Volume Resistivity	8.40e+13 ohm-cm	8.40e+13 ohm-cm	IEC 60093
Dielectric Strength	21.5 kV/mm	546 kV/in	IEC 60243-1

Users viewing this material also viewed the following:

Copyright © lookpolymers.com All Rights Reserved