- HOME
- POLYMER SEARCH
- Martensitic
- Crucible Steel CPM® S110V® Stainless Tool Steel
Crucible Steel CPM® S110V® Stainless Tool Steel
| Category | Metal , Ferrous Metal , Martensitic , Stainless Steel , Tool Steel |
| Manufacturer | Crucible Steel |
| Trade Name | CPM® |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Crucible Steel CPM® S110V® Stainless Tool Steel.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
CPM S110V is a high alloy martensitic stainless tool steel produced by the Crucible Particle Metallurgy (CPM) process. CPM S110V contains a high volume fraction of both vanadium-rich and niobium-rich primary alloy carbides for exceptionally good wear resistance compared to other commercially available PM tool steels. It also offers better corrosion resistance than 440C or CPM S90V.CPM S110V is currently only available on special request in the as-HIP condition or as a clad layer on components. It is not available in forged or rolled bar lengths.The CPM process results in a fine and uniform carbide distribution in CPM S110V compared to conventionally produced high alloy tool steels which results in relatively good machining, grinding, and toughness characteristics despite the high alloy content.Information provided by Crucible Industries
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Rockwell C | 47.5 @Tempering Temp. 649 °C |
47.5 @Tempering Temp. 1200 °F |
austenitizied at 2150°F then quenched and tempered |
| 53.5 @Tempering Temp. 593 °C |
53.5 @Tempering Temp. 1100 °F |
austenitizied at 2150°F then quenched and tempered | |
| 58.5 @Tempering Temp. 566 °C |
58.5 @Tempering Temp. 1050 °F |
austenitizied at 2150°F then quenched and tempered | |
| 60 @Tempering Temp. 260 °C |
60 @Tempering Temp. 500 °F |
austenitizied at 2150°F then quenched and tempered | |
| 60.5 @Tempering Temp. 399 °C |
60.5 @Tempering Temp. 750 °F |
austenitizied at 2150°F then quenched and tempered | |
| 60.5 @Tempering Temp. 551.7 °C |
60.5 @Tempering Temp. 1025 °F |
austenitizied at 2150°F then quenched and tempered | |
| 61.5 @Tempering Temp. 538 °C |
61.5 @Tempering Temp. 1000 °F |
austenitizied at 2150°F then quenched and tempered | |
| 63.5 @Tempering Temp. 524 °C |
63.5 @Tempering Temp. 975 °F |
austenitizied at 2150°F then quenched and tempered |
| Component Elements Properties | Metric | English | Comments |
|---|---|---|---|
| Carbon, C | 2.8 % | 2.8 % | |
| Chromium, Cr | 15.25 % | 15.25 % | |
| Cobalt, Co | 2.5 % | 2.5 % | |
| Iron, Fe | 65.2 % | 65.2 % | as balance |
| Molybdenum, Mo | 2.25 % | 2.25 % | |
| Niobium, Nb (Columbium, Cb) | 3.0 % | 3.0 % | |
| Vanadium, V | 9.0 % | 9.0 % |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Corrosion Rate | 0 mm/yr at 500°F | in dilute aqua regia |
| 1 mm/yr at 750°F | in dilute aqua regia | |
| 7 mm/yr at 1025°F | in dilute aqua regia | |
| 9 mm/yr at 975°F | in dilute aqua regia | |
| Pitting Resistance | -150 mV | polarization curves in 5% NaCl, tempered at 1025°F |
| 200 mV | polarization curves in 5% NaCl, tempered at 500°F | |
| Wear Resistance | 29 mg | weight loss, 63 HRC |
| 45 mg | weight loss, 60 HRC |
Users viewing this material also viewed the following:
Copyright © lookpolymers.com All Rights Reserved