- HOME
- POLYMER SEARCH
- Thermoset
- Epoxy
- Cotronics 454B Machinable Non-Sag Putty Adhesive
Cotronics 454B Machinable Non-Sag Putty Adhesive
| Category | Polymer , Thermoset , Epoxy |
| Manufacturer | Cotronics |
| Trade Name | |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Cotronics 454B Machinable Non-Sag Putty Adhesive.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.90 g/cc | 0.0686 lb/in³ | |
| Moisture Absorption at Equilibrium | 0.20 % | 0.20 % | |
| Viscosity | 100000 cP | 100000 cP |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore D | 80 | 80 | |
| Tensile Strength, Ultimate | 68.9 MPa | 10000 psi | |
| Elongation at Break | 1.2 % | 1.2 % |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 80.0 µm/m-°C @Temperature 20.0 °C |
44.4 µin/in-°F @Temperature 68.0 °F |
|
| Thermal Conductivity | 5.04 W/m-K | 35.0 BTU-in/hr-ft²-°F | |
| Maximum Service Temperature, Air | 232 °C | 450 °F | |
| Shrinkage | 0.20 % | 0.20 % |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Volume Resistivity | 1.00e+10 ohm-cm | 1.00e+10 ohm-cm | |
| Dielectric Strength | 17.7 kV/mm | 450 kV/in |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Cure Time | 30.0 min @Temperature 121 °C |
0.500 hour @Temperature 250 °F |
Users viewing this material also viewed the following:
- Plastcom SLOVAMID 6 GF 25 Polyamide 6, 25% Glass Fiber
- PolyOne Maxxam™ PPC-10G Nat Polypropylene Copolymer (PP Copolymer)
- Overview of materials for Acrylonitrile Butadiene Styrene (ABS), 10% Glass Fiber Filled
- NOVA Chemicals Gedexcel® 76XA Expandable Polystyrene
- Mitsui Arlenâ„¢ C230 30% Glass Fiber-Reinforced Modified Nylon 6T (DAM)
- Lehmann & Voss LUVOCOM® 1106-7223 Polyether imide, with PTFE
- Latrobe Lescalloy® 52100 VAC-ARC High Performance Bearing Steel
- SABIC Innovative Plastics Ultem 2412EPR PEI (Asia Pacific)
- A. Schulman ComAlloy® 510-3010 10% Glass Fiber Reinforced Polycarbonate
- DSM Akulon® Ultraflow™ K-FHG12 Nylon 6-60% Glass Reinforced (European and Asian Grade) (Dry)
Copyright © lookpolymers.com All Rights Reserved