- HOME
- POLYMER SEARCH
- Oxide
- Aluminum Oxide
- Chosun Refractories HSC-17 Dense and High-Strength Castable, Credens
Chosun Refractories HSC-17 Dense and High-Strength Castable, Credens
| Category | Ceramic , Oxide , Aluminum Oxide |
| Manufacturer | Chosun Refractories |
| Trade Name | |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Chosun Refractories HSC-17 Dense and High-Strength Castable, Credens.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Information provided by Chosun Refractories via Korea Institute of Ceramic Engineering and Technology (KICET).
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Modulus of Rupture | 0.010791 GPa @Temperature 110 °C, Time 86400 sec |
1.5651 ksi @Temperature 230 °F, Time 24.0 hour |
|
| 0.011772 GPa @Temperature 1000 °C, Time 10800 sec |
1.7074 ksi @Temperature 1830 °F, Time 3.00 hour |
||
| 0.012753 GPa @Temperature 1500 °C, Time 10800 sec |
1.8497 ksi @Temperature 2730 °F, Time 3.00 hour |
||
| Compressive Strength | 63.7 MPa @Temperature 110 °C, Time 86400 sec |
9250 psi @Temperature 230 °F, Time 24.0 hour |
Cold Crushing Strength |
| 66.7 MPa @Temperature 1000 °C, Time 10800 sec |
9670 psi @Temperature 1830 °F, Time 3.00 hour |
Cold Crushing Strength | |
| 80.4 MPa @Temperature 1500 °C, Time 10800 sec |
11700 psi @Temperature 2730 °F, Time 3.00 hour |
Cold Crushing Strength |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Maximum Service Temperature, Air | 1700 °C | 3090 °F | limited |
| Shrinkage | -0.400 % @Temperature 1500 °C, Time 10800 sec |
-0.400 % @Temperature 2730 °F, Time 3.00 hour |
|
| -0.0500 % @Temperature 110 °C, Time 86400 sec |
-0.0500 % @Temperature 230 °F, Time 24.0 hour |
| Component Elements Properties | Metric | English | Comments |
|---|---|---|---|
| Al2O3 | 75 % | 75 % | |
| CaO | 2.0 % | 2.0 % | |
| SiO2 | 20 % | 20 % |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Cure Time | 120 - 600 min | 2.00 - 10.0 hour | Setting Time |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Installation Method | Vibrating, Casting | |
| Material Required for Estimating(kg/?) | 2,750 | |
| Water Required for Casting(%) | 6 |
Users viewing this material also viewed the following:
- Honeywell ACLAR® 22C (7.50 mil) Copolymer Film (discontinued **)
- Lehmann & Voss LUVOCOM® 1105-8169 PEEK, with carbon fiber
- Schott P-SF8 Glass
- SPS Guang Zhou FILLMAâ„¢ 5002F30A Mineral Filled Polypropylene
- Techmer ES HiFill® PA6/6 GF30 L 30% Glass Filled
- Suqian Unitechem Light Stabilizer 944
- Dow Nordel® IP 4725P Dense Extrusion
- Chem Polymer Durlex 730 G PBT, 30% Glass Fiber Reinforced
- Mateck Thallium Bromoiodide TIBr-TII (KRS-5)
Copyright © lookpolymers.com All Rights Reserved