Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

ChevronTexaco Sil-X® SF Grease

Category Fluid , Lubricant , Silica Gellant
Manufacturer ChevronTexaco Corp
Trade Name Sil-X®
Port Shanghai port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF ChevronTexaco Sil-X® SF Grease.pdf
Price EMAIL US    sales@lookpolymers.com
  Online Service   lookpolymers   27660005
Material Notes:
FeaturesChevron Sil-X Grease is a silica thickened grease. It is manufactured using high viscosity, high viscosity index base oils and contain effective rust and oxidation inhibitors.It is transparent red in color, and has a smooth consistency with distinct stringiness.Chevron Sil-X Grease provides outstanding lubrication in industrial applications where extremely high temperatures are encountered. The dropping points of Chevron Sil-X Grease exceeds 260°C (500°F). Chevron Sil-X Grease has a very high film strength and performs well under shock load conditions. It minimizes wear and prevents scuffing.Its high viscosity oil and high viscosity additive characteristics enable this lubricant to seal bearings and resist leakage and washout.Under high temperature operating conditions, the "no melt" silica keeps the lubricant in place long after conventional multipurpose greases would have melted and run out of bearings.Chevron Sil-X Grease has an excellent pumpability characteristic.ApplicationsChevron Sil-X Grease is recommended for industrial applications subjected to very high temperatures requiring a lubricant which will not melt.Typical applications are plain or journal bearings, antifriction bearings, gear cases in kiln cars, conveyors in ceramic and paint baking ovens furnace doors, shafts extending through furnaces, etc.
Physical Properties Metric English Comments
Viscosity Measurement 94
94
Viscosity Index; ASTM D2270
Saybolt Viscosity at 100°F 2506 SUS
2506 SUS
Saybolt Viscosity at 210°F 150 SUS
150 SUS
Kinematic Viscosity at 40°C (104°F) 467 cSt
467 cSt
ASTM D445
Kinematic Viscosity at 100°C (212°F) 30.5 cSt
30.5 cSt
ASTM D445
Mechanical Properties Metric English Comments
Penetration 480
480
Worked
Penetration P(0), 1/10 mm 485
485
Thermal Properties Metric English Comments
Maximum Service Temperature, Air 121 °C
250 °F
Minimum Service Temperature, Air -9.00 °C
15.8 °F
Pour Point -21.0 °C
-5.80 °F
ASTM D97
Flash Point 304 °C
579 °F
ASTM D92
Descriptive Properties Value Comments
Color Red
Texture Semifluid
Thickener, % / type 3 / Silica
Users viewing this material also viewed the following:
Copyright © lookpolymers.com All Rights Reserved