Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

ChevronTexaco Anti-Freeze/Coolant Extended Life

Category Fluid
Manufacturer ChevronTexaco Corp
Trade Name
Port Ningbo port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF ChevronTexaco Anti-Freeze/Coolant Extended Life.pdf
Price EMAIL US    sales@lookpolymers.com
  Online Service   lookpolymers   27660005
Material Notes:
750,000 miles on-road use (8 years or 15,000 hours off-highway use) on initial fill with no Extender neededAdditional Extended service life of 1,000,000 miles/20,000 hours/8 years with Extender added at 500,000 miles/10,000 hours/8 years.Improved corrosion protection and lower electrical conductivity.Reduced maintenance and related costs.No addition of supplemental coolant additives (SCAs) needed.No inhibitor testing required needed.Excellent protection against pitting, corrosion and erosion even on hard to protect metals like aluminum.Excellent heat transfer compared to silicate containing coolants.Improved water pump life due to no silicate formula.Excellent protection for all heavy duty engines including engines using EGR and ACERT technology.Protection against winter freeze-up and summer boil-over.Biodegradable in its unused form.Outstanding hot surface aluminum protectionSuitable for gasoline powered automotive and industrial enginesCompatible with conventional antifreeze. Dilution with conventional antifreeze will reduce extended life benefits. Texaco recommends that this product not be diluted by more than 25% with conventional coolants.Texaco Extended Life Coolant/Anti-Freeze is a singlephase, ethylene glycol type heavy duty diesel engine coolant based on Texaco enhanced and patented extended life organic corrosion inhibitor system with nitrite and molybdate added. This product is recommended for freeze point adjustment and initial fill (dilute 50/50).The Texaco Extended Life Coolant/Anti-Freeze family is made up of three products:Texaco Extended Life Coolant/Anti-freeze concentrate is a glycol based product that contains patented carboxlylate inhibitors. This product is recommended for use to adjust freeze point and for initial fill. For initial fill this product must be diluted.Texaco Extended Life Prediluted 50/50 Coolant/Anti-Freeze is a 50/50 dilution of Texaco ELC concentrate with deionized water. This product should be used as sold. The freeze point of Texaco ELC 50/50 is -34°F (-37°C). This product is recommended mainly for top-up.Texaco Extender is a re-charge for Texaco ELC in service coolant. It is to be added if a service life of greater than 750,000 miles/15,000 hours/8 years is needed. Addition of Texaco Extender at 500,000 miles/10,000 hours/4 years will extend service life out to 1,000,000 miles/20,000 hours/8 years.Texaco ELC exhibits a lower reserve alkalinity and lower pH when compared to traditional phosphate and borate containing coolants. These differences are due to the unique inhibitor package used in Texaco ELC and does not in any way compromise corrosion protection. ASTM (American Society of Testing and Materials) has recognized that RA is not a indicator of corrosion protection effectiveness and has removed all RA requirements for coolant/antifreeze products.Texaco Extended Life Coolant has lower pH and RA relative to traditional coolants. The pH change profile in service is a more important performance measure than the RA level. Texaco Extended Life Coolant/Anti-Freeze shows a typical pH reduction of less than 1.5 units in 160,000-kilometer fleet tests compared with a pH reduction of up to 3 units for traditional coolants.The freeze point of a coolant is a measure of how low the fluids temperature can go before it freezes. The ratio of glycol and water in an antifreeze/coolant will determine the freeze point. The easiest and most accurate way to measure freeze point is by using a refractometer. The freeze point of Texaco ELC should be maintained between -12°F (-37°C) and -62°F (-57.7°C).Texaco Extended Life Coolant System is a heavy-duty, ethylene glycol based engine coolant system which incorporates patented organic corrosion inhibitor technology. The Texaco ELC formula has been recently enhanced to provide longer service life, enhanced corrosion protection and lower electrical coCPS Number: 227997; MSDS Number: 10300
Physical Properties Metric English Comments
Specific Gravity 1.13 g/cc
1.13 g/cc
15/15°C
pH 8.3
8.3
1:2 Dilution with water; ASTM D1287
Thermal Properties Metric English Comments
Melting Point -37.0 °C
-34.6 °F
50 vol % Aqueous Solution; ASTM D1177
Descriptive Properties Value Comments
Appearance Red
Glassware Corrosion Test, Aluminum 4
Weight loss, mg per coupon<sup>1</sup>
Glassware Corrosion Test, Brass 3
Weight loss, mg per coupon<sup>1</sup>
Glassware Corrosion Test, Copper 2
Weight loss, mg per coupon<sup>1</sup>
Glassware Corrosion Test, Iron 1
Weight loss, mg per coupon<sup>1</sup>
Glassware Corrosion Test, Solder 0
Weight loss, mg per coupon<sup>1</sup>
Glassware Corrosion Test, Steel -1
Weight loss, mg per coupon<sup>1</sup>
Reserve Alkalinity (mL) 6
ASTM D1121
Silicate % None
As Anhydrous Alkali Metasilicate
Users viewing this material also viewed the following:
Copyright © lookpolymers.com All Rights Reserved