Chevron Phillips Xtel® XE5030BL Polyphenylene Sulfide Alloy

Category	Polymer , Thermoplastic , Polyphenylene Sulfide (PPS)
Manufacturer	Chevron Phillips Chemical Company LP
Trade Name	Xtel®
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Chevron Phillips Xtel® XE5030BL Polyphenylene Sulfide Alloy.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Xtel® XE5030BL is a high performance, glass fiber reinforced, PPS based alloy developed to provide high ductility and impact strength along with good thermal stability.Information provided by Chevron PhillipsMeasured on 102mm x 102mm x 3.2 mm plaques, edge gated.

Physical Properties	Metric	English	Comments
Density	1.50 g/cc	0.0542 lb/in³	ISO 1183A
Water Absorption	0.050 %	0.050 %	ASTM D-570
Linear Mold Shrinkage, Flow	0.0020 cm/cm	0.0020 in/in
Linear Mold Shrinkage, Transverse	0.0060 cm/cm	0.0060 in/in

Mechanical Properties	Metric	English	Comments
Tensile Strength, Yield	140 MPa	20300 psi	ISO 527
Elongation at Yield	2.1 %	2.1 %	ISO 527
Flexural Strength	200 MPa	29000 psi	ISO 178
Flexural Modulus	8.50 GPa	1230 ksi	ISO 178
Compressive Strength	210 MPa	30500 psi	ISO 604
Izod Impact, Notched (ISO)	9.00 kJ/m²	4.28 ft-lb/in²	ISO 180A
Izod Impact, Unnotched (ISO)	45.0 kJ/m²	21.4 ft-lb/in²	ISO 180A

Thermal Properties	Metric	English	Comments
CTE, linear	15.0 µm/m-°C @Temperature 100 - 200 °C	8.33 µin/in-°F @Temperature 212 - 392 °F	Axial; ISO 11359-2
	20.0 µm/m-°C @Temperature -50.0 - 50.0 °C	11.1 µin/in-°F @Temperature -58.0 - 122 °F	Axial; ISO 11359-2
CTE, linear, Transverse to Flow	65.0 µm/m-°C @Temperature -50.0 - 50.0 °C	36.1 µin/in-°F @Temperature -58.0 - 122 °F	ISO 11359-2
	130 µm/m-°C @Temperature 100 - 200 °C	72.2 µin/in-°F @Temperature 212 - 392 °F	ISO 11359-2
Deflection Temperature at 1.8 MPa (264 psi)	250 °C	482 °F	ISO 75
Flammability, UL94	V-0	V-0

Electrical Properties	Metric	English	Comments
Volume Resistivity	1.00e+15 ohm-cm	1.00e+15 ohm-cm	ASTM D-257
Dielectric Constant	3.5 @Frequency 1e+6 Hz	3.5 @Frequency 1e+6 Hz	ASTM D-150
	3.6 @Frequency 1000 Hz	3.6 @Frequency 1000 Hz	ASTM D-150
Dielectric Strength	20.0 kV/mm	508 kV/in	ASTM D-149
Dissipation Factor	0.0040 @Frequency 1000 Hz	0.0040 @Frequency 1000 Hz	ASTM D-150
	0.0090 @Frequency 1e+6 Hz	0.0090 @Frequency 1e+6 Hz	ASTM D-150
Arc Resistance	120 sec	120 sec	ASTM D-495
Comparative Tracking Index	150 V	150 V	UL 746A

Processing Properties	Metric	English	Comments
Melt Temperature	315 - 345 °C	599 - 653 °F
Mold Temperature	135 °C	275 °F

Users viewing this material also viewed the following: