Resin Type: enhanced linear low density polyethylene, slip, antiblock and processing aid additivesCharacteristics: superior dart impact, optical, hot-tack and heat seal properties, good drawdown, can be used straight or blended with LDPE or HDPEApplications: thick or thin film applications where superior toughness and abuse resistance, hot-tack and heat-seal, and optical properties are criticalNatural ColorSlip: 0 ppmAntiblock: 7500 ppm.Recommended processing conditions: 6.35 cm extruder. 24:1 screw L/D ratio. 0.203 cm die opening. Melt temperature 232°C. Blow up ratio 2.5:1. Output rate 8.0 lb/hr/in die cir.Hot-Tack Initiation Temperature: 77°CUltimate Hot-Tack Strength: 3.7 NHeat Seal Initiation Temperature at 0.5 lb.: 96°CUltimate Heat Seal Strength: 11.3 N.Film properties based on thickness of 0.0318 mm.Information provided by Chevron Phillips Chemical Company.