- HOME
- POLYMER SEARCH
- Thermoset
- Epoxy
- Chesterton ARC CS2 Low-viscosity, Composite concrete primer sealer
Chesterton ARC CS2 Low-viscosity, Composite concrete primer sealer
| Category | Polymer , Thermoset , Epoxy |
| Manufacturer | Chesterton |
| Trade Name | ARC |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Chesterton ARC CS2 Low-viscosity, Composite concrete primer sealer.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Description: An advanced composite formulated to protect concrete surfaces from mild chemical attack. It is normally applied at a thickness of 250-375 microns (10-15 mils) per coat. Non-shrinking. 100% solids. ARC CS2 is a low viscosity high performance composite coating that can be easily applied by notched squeegee, brush, roller, or spray equipment. ARC CS2 yields excellent barrier properties for long-term chemical resistance in immersion exposures. The cured ARC CS2 provides a high gloss surface with adhesion to dry and wet concrete. Benefits:Outlasts conventional paints and coatingsLong pot life allows for ease of use100% solids, no shrinkage on cureOutstanding adhesion insures reliable performance Suggested Uses:Water and Sewage TanksSecondary ContainmentPipeline CoatingsClarifier TanksWater Intakes and DamsCooling TowersTurbine DecksIndustrial FloorsInformation provided by Chesterton
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.30 g/cc | 0.0470 lb/in³ | Cured |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore D | 87 | 87 | ASTM D2240 |
| Tensile Strength at Break | 23.3 MPa | 3380 psi | ASTM D638 |
| Modulus of Elasticity | 2.41 GPa | 350 ksi | ASTM D790 |
| Flexural Strength | 40.0 MPa | 5800 psi | ASTM D790 |
| Compressive Strength | 66.5 MPa | 9650 psi | ASTM D695 |
| Adhesive Bond Strength | >= 3.86 MPa | >= 560 psi | Wet concrete; ASTM D4541 |
| >= 12.1 MPa | >= 1750 psi | Dry concrete; ASTM D4541 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Maximum Service Temperature, Air | 52.0 °C | 126 °F | Wet Service |
| 93.0 °C | 199 °F | Dry Service |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Cure Time | 360 min @Temperature 32.0 °C |
6.00 hour @Temperature 89.6 °F |
Foot Traffic |
| 540 min @Temperature 32.0 °C |
9.00 hour @Temperature 89.6 °F |
Light Load | |
| 600 min @Temperature 25.0 °C |
10.0 hour @Temperature 77.0 °F |
Foot Traffic | |
| 720 min @Temperature 16.0 °C |
12.0 hour @Temperature 60.8 °F |
Foot Traffic | |
| 960 min @Temperature 25.0 °C |
16.0 hour @Temperature 77.0 °F |
Light Load | |
| 960 min @Temperature 10.0 °C |
16.0 hour @Temperature 50.0 °F |
Foot Traffic | |
| 1200 min @Temperature 32.0 °C |
20.0 hour @Temperature 89.6 °F |
Full Load | |
| 1440 min @Temperature 16.0 °C |
24.0 hour @Temperature 60.8 °F |
Light Load | |
| 1800 min @Temperature 25.0 °C |
30.0 hour @Temperature 77.0 °F |
Full Load | |
| 2160 min @Temperature 10.0 °C |
36.0 hour @Temperature 50.0 °F |
Light Load | |
| 2400 min @Temperature 16.0 °C |
40.0 hour @Temperature 60.8 °F |
Full Load | |
| 3840 min @Temperature 10.0 °C |
64.0 hour @Temperature 50.0 °F |
Full Load | |
| 4800 min @Temperature 32.0 °C |
80.0 hour @Temperature 89.6 °F |
Full Chemical | |
| 6000 min @Temperature 25.0 °C |
100 hour @Temperature 77.0 °F |
Full Chemical | |
| 8400 min @Temperature 16.0 °C |
140 hour @Temperature 60.8 °F |
Full Chemical | |
| 10800 min @Temperature 10.0 °C |
180 hour @Temperature 50.0 °F |
Full Chemical |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Thermal Compatibility to Concrete | Pass | 5 cycles/dry<-10°C to 50°C (<14°F to 122°F) |
Users viewing this material also viewed the following:
Copyright © lookpolymers.com All Rights Reserved