Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Celanese ZENITE 5115L LCP, 15% Glass Reinforced  (Unverified Data**)

Category Polymer , Thermoplastic , Liquid Crystal Polymer (LCP) , Liquid Crystal Polymer (LCP), 20% Glass Fiber Filled
Manufacturer
Trade Name
Port Shanghai port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF Celanese ZENITE 5115L LCP, 15% Glass Reinforced  (Unverified Data**).pdf
Price EMAIL US    sales@lookpolymers.com
  Online Service   lookpolymers   27660005
Material Notes:
Zenite® 5115L is a 15% glass fiber reinforced liquid crystal polymer for injection molding with improved toughness.15% glass-reinforced, lubricatedInformation provided by Celanese
Mechanical Properties Metric English Comments
Tensile Strength at Break 175 MPa
25400 psi
5mm/min; ISO 527-2/1A
Elongation at Break 3.3 %
3.3 %
5mm/min; ISO 527-2/1A
Flexural Strength 170 MPa
24700 psi
ISO 178
Flexural Modulus 10.5 GPa
1520 ksi
ISO 178
Thermal Properties Metric English Comments
Melting Point 319 °C
606 °F
10°C/min; ISO 11357-1,-2,-3
Deflection Temperature at 1.8 MPa (264 psi) 275 °C
527 °F
ISO 75-1, -2
Flammability, UL94 V-0

@Thickness 0.800 mm
V-0

@Thickness 0.0315 in
UL94
Electrical Properties Metric English Comments
Dielectric Constant 2.5

@Frequency 1.00e+6 Hz
2.5

@Frequency 1.00e+6 Hz
IEC 60250
3.76

@Frequency 2.05e+9 Hz
3.76

@Frequency 2.05e+9 Hz
IPC TM-650 2.5.5.13
Dissipation Factor 0.0030

@Frequency 2.05e+9 Hz
0.0030

@Frequency 2.05e+9 Hz
IPC TM-650 2.5.5.13
0.0159

@Frequency 1.00e+6 Hz
0.0159

@Frequency 1.00e+6 Hz
IEC 60250
Processing Properties Metric English Comments
Processing Temperature 20.0 - 30.0 °C
68.0 - 86.0 °F
80.0 - 120 °C
176 - 248 °F
Cavity temperature
Feed Temperature 40.0 - 60.0 °C
104 - 140 °F
Zone 1 320 - 330 °C
608 - 626 °F
Zone 2 335 - 345 °C
635 - 653 °F
Zone 3 335 - 345 °C
635 - 653 °F
Zone 4 335 - 345 °C
635 - 653 °F
Die Temperature 335 - 345 °C
635 - 653 °F
Melt Temperature 325 - 345 °C
617 - 653 °F
Drying Temperature 150 °C
302 °F
Dry Time 3.00 hour
3.00 hour
Moisture Content 0.010 %
0.010 %
Necessary low maximum residual
Injection Pressure 50.0 - 150 MPa
7250 - 21800 psi
Hold Pressure 50.0 - 150 MPa
7250 - 21800 psi
Back Pressure 3.00 MPa
435 psi
Copyright © lookpolymers.com All Rights Reserved