Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Celanese Hostaform® M10AE POM, Unfilled

Category Polymer , Thermoplastic , Acetal (POM)
Manufacturer Celanese Corporation
Trade Name HOSTAFORM
Port Ningbo port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF Celanese Hostaform® M10AE POM, Unfilled.pdf
Price EMAIL US    sales@lookpolymers.com
  Online Service   lookpolymers   27660005
Material Notes:
POM copolymerInformation provided by Celanese
Physical Properties Metric English Comments
Density 1.41 g/cc
0.0509 lb/in³
ISO 1183
Water Absorption at Saturation 0.650 %
0.650 %
ISO 62
Melt Flow 0.900 g/10 min

@Load 2.16 kg,
Temperature 190 °C
0.900 g/10 min

@Load 4.76 lb,
Temperature 374 °F
[cm3/10min]; ISO 1133
Mechanical Properties Metric English Comments
Tensile Strength, Yield 65.0 MPa
9430 psi
50mm/min; ISO 527-2/1A
Elongation at Break 25.0 %
25.0 %
Elongation at Yield 9.00 %
9.00 %
50mm/min; ISO 527-2/1A
Tensile Modulus 2.90 GPa
421 ksi
50mm/min; ISO 527-2/1A
Charpy Impact Unnotched 22.0 J/cm²
105 ft-lb/in²
partial break; ISO 179/1eU
20.0 J/cm²

@Temperature -30.0 °C
95.2 ft-lb/in²

@Temperature -22.0 °F
ISO 179/1eU
Charpy Impact, Notched 1.00 J/cm²
4.76 ft-lb/in²
ISO 179/1eA
0.800 J/cm²

@Temperature -30.0 °C
3.81 ft-lb/in²

@Temperature -22.0 °F
ISO 179/1eA
Tensile Creep Modulus, 1 hour 2400 MPa
348000 psi
ISO 899-1
Tensile Creep Modulus, 1000 hours 1200 MPa
174000 psi
ISO 899-1
Thermal Properties Metric English Comments
CTE, linear, Parallel to Flow 130 µm/m-°C
72.2 µin/in-°F
ISO 11359-2
Melting Point 167 °C
333 °F
10°C/min; ISO 11357-1,-2,-3
Deflection Temperature at 1.8 MPa (264 psi) 97.0 °C
207 °F
ISO 75-1, -2
Electrical Properties Metric English Comments
Volume Resistivity 1.00e+14 ohm-cm
1.00e+14 ohm-cm
IEC 60093
Surface Resistance 1.00e+14 ohm
1.00e+14 ohm
IEC 60093
Dielectric Constant 4.00

@Frequency 1.00e+6 Hz
4.00

@Frequency 1.00e+6 Hz
IEC 60250
4.00

@Frequency 100 Hz
4.00

@Frequency 100 Hz
IEC 60250
Dielectric Strength 28.0 kV/mm
711 kV/in
IEC 60243-1
Dissipation Factor 0.00200

@Frequency 100 Hz
0.00200

@Frequency 100 Hz
IEC 60250
0.00500

@Frequency 1.00e+6 Hz
0.00500

@Frequency 1.00e+6 Hz
IEC 60250
Comparative Tracking Index 600 V
600 V
IEC 60112
Processing Properties Metric English Comments
Processing Temperature 80.0 - 120 °C
176 - 248 °F
cavity
190 - 210 °C
374 - 410 °F
hot runner
Feed Temperature 60.0 - 80.0 °C
140 - 176 °F
Middle Barrel Temperature 20.0 - 30.0 °C
68.0 - 86.0 °F
Zone 1 170 - 180 °C
338 - 356 °F
Zone 2 180 - 190 °C
356 - 374 °F
Zone 3 190 - 200 °C
374 - 392 °F
Zone 4 190 - 210 °C
374 - 410 °F
Die Temperature 190 - 210 °C
374 - 410 °F
Melt Temperature 190 - 210 °C
374 - 410 °F
Drying Temperature 120 - 140 °C
248 - 284 °F
Dry Time 3.00 - 4.00 hour
3.00 - 4.00 hour
Moisture Content <= 0.150 %
<= 0.150 %
Injection Pressure 60.0 - 120 MPa
8700 - 17400 psi
Hold Pressure 60.0 - 120 MPa
8700 - 17400 psi
Back Pressure <= 4.00 MPa
<= 580 psi
Screw Speed 70.0 rpm

@Diameter 55.0 mm
70.0 rpm

@Diameter 2.17 in
100 rpm

@Diameter 40.0 mm
100 rpm

@Diameter 1.57 in
150 rpm

@Diameter 25.0 mm
150 rpm

@Diameter 0.984 in
Descriptive Properties Value Comments
Injection molding Yes
Injection Speed slow-medium
Processing conditions acc. ISO 9988
Profile extrusion Yes
Sheet extrusion Yes
Copyright © lookpolymers.com All Rights Reserved