Celanese FORTRON® 1140 E7 Polyphenylene Sulfide (PPS)

Category	Polymer , Thermoplastic , Polyphenylene Sulfide (PPS) , Polyphenylene Sulfide (PPS); Molded
Manufacturer	Celanese Corporation
Trade Name	Fortron®
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Celanese FORTRON® 1140 E7 Polyphenylene Sulfide (PPS).pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Description: Fortron 1140E7 is an inherently flame-retardant grade exhibiting extremely low flash and fast cycle times. It has excellent electrical properties, high hardness and stiffness. This grade exhibits good high-temperature load-bearing capabilities. It is especially used for thinner walled and longer flow length parts requiring low flash behavior. Good weldability due to a modest filler level. Commonly used in electrical connectors and other thin wall/long flow length parts.Information provided by Celanese Corporation.

Physical Properties	Metric	English	Comments
Density	1.65 g/cc	0.0596 lb/in³	ISO 1183
Water Absorption at Saturation	0.020 %	0.020 %	ISO 62
Linear Mold Shrinkage	0.0020 - 0.0060 cm/cm	0.0020 - 0.0060 in/in	ISO 294-4
Linear Mold Shrinkage, Transverse	0.0040 - 0.0060 cm/cm	0.0040 - 0.0060 in/in	ISO 294-4

Mechanical Properties	Metric	English	Comments
Hardness, Rockwell M	100	100	ISO 2039-2
Tensile Strength at Break	150 MPa	21800 psi	5 mm/min; ISO 527-2/1A
Elongation at Break	1.2 %	1.2 %	5 mm/min; ISO 527-2/1A
Tensile Modulus	15.7 GPa	2280 ksi	1 mm/min; ISO 527-2/1A
Flexural Strength	230 MPa	33400 psi	ISO 178
Izod Impact, Notched (ISO)	7.00 kJ/m²	3.33 ft-lb/in²	ISO 180/1A
	7.00 kJ/m² @Temperature -30.0 °C	3.33 ft-lb/in² @Temperature -22.0 °F	ISO 180/1A
Charpy Impact Unnotched	2.80 J/cm²	13.3 ft-lb/in²	ISO 179/1eU
	2.80 J/cm² @Temperature -30.0 °C	13.3 ft-lb/in² @Temperature -22.0 °F	ISO 179/1eU
Charpy Impact, Notched	0.700 J/cm²	3.33 ft-lb/in²	ISO 179/1eA
	0.700 J/cm² @Temperature -30.0 °C	3.33 ft-lb/in² @Temperature -22.0 °F	ISO 179/1eA

Thermal Properties	Metric	English	Comments
CTE, linear	20.0 µm/m-°C @Temperature 20.0 °C	11.1 µin/in-°F @Temperature 68.0 °F	ISO 11359-2
CTE, linear, Transverse to Flow	41.0 µm/m-°C @Temperature 20.0 °C	22.8 µin/in-°F @Temperature 68.0 °F	ISO 11359-2
Melting Point	280 °C	536 °F	ISO 11357-1,2,3
Deflection Temperature at 1.8 MPa (264 psi)	270 °C	518 °F	ISO 75-1, -2
Deflection Temperature at 8.0 MPa	215 °C	419 °F	ISO 75-1, -2
Glass Transition Temp, Tg	90.0 °C	194 °F	ISO 11357-1,-2,-3
Oxygen Index	47 %	47 %	ISO 4589

Electrical Properties	Metric	English	Comments
Volume Resistivity	>= 1.00e+15 ohm-cm	>= 1.00e+15 ohm-cm	IEC 60093
Surface Resistance	>= 1.00e+15 ohm	>= 1.00e+15 ohm	IEC 60093
Dielectric Constant	4.7 @Frequency 10000 Hz	4.7 @Frequency 10000 Hz	IEC 60250
Dielectric Strength	25.0 kV/mm	635 kV/in	IEC 60243-1
Dissipation Factor	0.0080 @Frequency 10000 Hz	0.0080 @Frequency 10000 Hz	IEC 60250
	0.020 @Frequency 1e+6 Hz	0.020 @Frequency 1e+6 Hz	IEC 60250

Processing Properties	Metric	English
Rear Barrel Temperature	307 - 335 °C	585 - 635 °F
Middle Barrel Temperature	310 - 338 °C	590 - 640 °F
Front Barrel Temperature	316 - 338 °C	600 - 640 °F
Nozzle Temperature	316 - 338 °C	600 - 640 °F
Melt Temperature	310 - 340 °C	590 - 644 °F
Mold Temperature	135 - 160 °C	275 - 320 °F
Drying Temperature	135 °C	275 °F
Dry Time	3 - 4 hour	3 - 4 hour
Injection Pressure	34.5 - 103 MPa	5000 - 15000 psi

Users viewing this material also viewed the following: