- HOME
- POLYMER SEARCH
- Electronic/Magnetic Alloy
- California Fine Wire Stablohm 610 Nickel, Chromium and Iron Resistance Wire
California Fine Wire Stablohm 610 Nickel, Chromium and Iron Resistance Wire
| Category | Metal , Electronic/Magnetic Alloy , Ferrous Metal |
| Manufacturer | California Fine Wire |
| Trade Name | Stablohm |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | California Fine Wire Stablohm 610 Nickel, Chromium and Iron Resistance Wire.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
All values may vary dependent on specific design and usageCapabilities: WireRibbonSquareInsulatedPlatedInformation provided by California Fine Wire.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 7.94 g/cc | 0.287 lb/in³ |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength at Break | 621 MPa | 90000 psi | Annealed |
| 965 MPa | 140000 psi | Stress relieved | |
| 1210 MPa | 175000 psi | Hard |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 15.6 µm/m-°C @Temperature 20.0 °C |
8.67 µin/in-°F @Temperature 68.0 °F |
|
| Specific Heat Capacity | 0.460 J/g-°C @Temperature 20.0 °C |
0.110 BTU/lb-°F @Temperature 68.0 °F |
|
| Thermal Conductivity | 13.0 W/m-K | 90.2 BTU-in/hr-ft²-°F | |
| Melting Point | 1300 °C | 2372 °F | |
| Maximum Service Temperature, Air | 980 °C | 1800 °F | Operating Temperature |
| Component Elements Properties | Metric | English | Comments |
|---|---|---|---|
| Chromium, Cr | 20 % | 20 % | |
| Iron, Fe | 45 % | 45 % | as balance |
| Nickel, Ni | 35 % | 35 % |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Electrical Resistivity | 0.000101 ohm-cm | 0.000101 ohm-cm | 3% tolerance on sizes below 0.02, 5% tolerance on sizes above 0.02 |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Magnetic | Faint | |
| Temperature Coefficient of Resistance | 0.0004 ohms/ohm-°C | 0-100°C |
Users viewing this material also viewed the following:
- RheTech Products RCT120-01 20% Talc Reinforced Polypropylene, Black, Recycled Content
- Polymer Resources PEI-G40 Polyetherimide, 40% Glass Reinforced (Unverified Data**)
- MarkeTech Cu/Mo/Cu 1:3:1 Laminated Sheet
- Lord Adhesives Metech 3504 Palladium Silver Conductor Composition
- Kraton® D1118 B (SBS) Linear Triblock Copolymer
- Cheng Yu Plastic PP228H TALC 10 Polypropylene, 10% Talc, High Heat
- Dow Corning MOLYKOTE® G-4700 EXTREME PRESSURE SYNTHETIC GREASE
- Colorite Polymers 2002 Rigid PVC
- BASF Ultramid® A3HG5 25% Glass Filled PA66 (Conditioned)
Copyright © lookpolymers.com All Rights Reserved