Bulk Molding Compounds BMC 1603 Multi-purpose grade

Category	Polymer , Thermoset , Polyester, TS
Manufacturer	BMC - Bulk Molding Compounds Inc.
Trade Name	BMC
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Bulk Molding Compounds BMC 1603 Multi-purpose grade.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

BMC 1603 is a multi-purpose, moderate strength, low cost material that is suitable for injection, compression and transfer molding. UL® recognized. This material was formerly known as Glastic® 1603.

Physical Properties	Metric	English	Comments
Specific Gravity	1.95 - 2.01 g/cc	1.95 - 2.01 g/cc
Water Absorption	0.17 - 0.23 %	0.17 - 0.23 %	24 hours, 23°C
Linear Mold Shrinkage	0.0010 - 0.0030 cm/cm	0.0010 - 0.0030 in/in

Mechanical Properties	Metric	English
Hardness, Barcol	40 - 50	40 - 50
Tensile Strength, Ultimate	37.9 - 44.8 MPa	5500 - 6500 psi
Flexural Strength	82.7 - 89.6 MPa	12000 - 13000 psi
Flexural Modulus	11.7 - 13.1 GPa	1700 - 1900 ksi
Compressive Strength	193 - 207 MPa	28000 - 30000 psi
Izod Impact, Notched	2.14 - 2.67 J/cm	4.00 - 5.00 ft-lb/in

Thermal Properties	Metric	English	Comments
Deflection Temperature at 1.8 MPa (264 psi)	>= 260 °C	>= 500 °F
Flammability, UL94	HB	HB

Electrical Properties	Metric	English	Comments
Dielectric Strength	17.2 kV/mm	436 kV/in	Short Time
Dissipation Factor	0.015 @Frequency 60 Hz	0.015 @Frequency 60 Hz	Condition A
	0.027 @Frequency 60 Hz	0.027 @Frequency 60 Hz	Condition D
	0.099 @Frequency 60 Hz	0.099 @Frequency 60 Hz	Condition A
	0.124 @Frequency 60 Hz	0.124 @Frequency 60 Hz	Condition D
Arc Resistance	182 sec	182 sec
Track Resistance	8.33 sec	8.33 sec

Processing Properties	Metric	English	Comments
Mold Temperature	138 - 166 °C	280 - 330 °F

Users viewing this material also viewed the following: