- HOME
- POLYMER SEARCH
- Thermoplastic
- Polyethylene (PE)
- LDPE
- Braskem PB208 Injection Molding Low Density Polyethylene
Braskem PB208 Injection Molding Low Density Polyethylene
| Category | Polymer , Thermoplastic , Polyethylene (PE) , LDPE |
| Manufacturer | Braskem |
| Trade Name | |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Braskem PB208 Injection Molding Low Density Polyethylene.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Injected lids and caps; Large flat surface injected pieces.Information provided by Braskem.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 0.923 g/cc | 0.923 g/cc | ASTM D1505/D792 |
| ESCR 10% Igepal® | 3.0 hour @Temperature 50.0 °C |
3.0 hour @Temperature 122 °F |
h/50%f; compression molded 2 mm notched-plaques; ASTM D1683 |
| Melt Flow | 22 g/10 min @Load 2.16 kg, Temperature 190 °C |
22 g/10 min @Load 4.76 lb, Temperature 374 °F |
ASTM D1238 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore D | 42 | 42 | ASTM D2240 |
| Tensile Strength at Break | 6.00 MPa | 870 psi | ASTM D638 |
| Tensile Strength, Yield | 10.0 MPa | 1450 psi | ASTM D638 |
| Flexural Modulus, 1% Secant | 700 MPa | 102000 psi | ASTM D790 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Vicat Softening Point | 87.0 °C | 189 °F | ASTM D1525 |
Users viewing this material also viewed the following:
Copyright © lookpolymers.com All Rights Reserved