Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

BNZ Materials CS85 High Temperature Structural Insulation

Category Ceramic , Oxide
Manufacturer BNZ Materials, Inc.
Trade Name
Port Ningbo port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF BNZ Materials CS85 High Temperature Structural Insulation.pdf
Price EMAIL US    sales@lookpolymers.com
  Online Service   lookpolymers   27660005
Material Notes:
NZ manufactures a variety of non-asbestos calcium silicate structural insulations that combine high strength and excellent thermal insulating characteristics for use in a variety of heat processing, fire protection, and electrical resistance applications. Our Tobermorite crystalline structure provides excellent thermal shock resistance as evidenced in its typical use as a direct contact board for non-ferrous metals and in fire training burn rooms. It is fire resistant to temperatures approaching 2000°F. The Tobermorite crystal is also unique by providing low thermal conductivities that remain relatively constant over a broad range of operating temperatures.Applications:Blow PlatesCore PlatesGlow Bar InsulatorsBottom BoardsDryer ShelvesInduction FurnacesChillsFlask LinersBenefits:EconomicalCorrosion ResistantHigh Electrical ResistivityLight WeightInsulates up to 1800°FMoisture ResistantEasily CleanedStrong & DurableEasily Fabricates fromLow WarpageNon-Combustible 4' x 8' SheetsInformation provided by BNZ Materials Inc.
Physical Properties Metric English Comments
Density 1.36 g/cc
0.0492 lb/in³
Mechanical Properties Metric English Comments
Modulus of Rupture 0.0207 GPa
3.00 ksi
Compressive Yield Strength 44.1 MPa

@Strain 5.00 %
6400 psi

@Strain 5.00 %
Compressive Strength 71.0 MPa
10300 psi
ultimate load
Thermal Properties Metric English Comments
Thermal Conductivity 0.280 W/m-K

@Temperature 257 °C
1.94 BTU-in/hr-ft²-°F

@Temperature 495 °F
0.290 W/m-K

@Temperature 538 °C
2.01 BTU-in/hr-ft²-°F

@Temperature 1000 °F
0.310 W/m-K

@Temperature 204 °C
2.15 BTU-in/hr-ft²-°F

@Temperature 399 °F
Shrinkage 0.24 %

@Temperature 871 °C,
Time 86400 sec
0.24 %

@Temperature 1600 °F,
Time 24.0 hour
Length/width
2.0 %

@Temperature 871 °C,
Time 86400 sec
2.0 %

@Temperature 1600 °F,
Time 24.0 hour
Thickness
Electrical Properties Metric English Comments
Volume Resistivity 4.52e+12 ohm-cm
4.52e+12 ohm-cm
ASTM D257
Dielectric Strength 2.40 kV/mm
61.0 kV/in
ASTM D495
Arc Resistance 304 sec
304 sec
ASTM D495
Processing Properties Metric English Comments
Moisture Content 1.0 %
1.0 %
Descriptive Properties Value Comments
Screw Holding Strength 397 kg
at 7/8" penetration
Users viewing this material also viewed the following:
Copyright © lookpolymers.com All Rights Reserved