POLYMER SEARCH

BCC Products BC 7062-3H Epoxy Casting

Category	Polymer , Thermoset , Epoxy
Manufacturer	BCC Products
Trade Name
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	BCC Products BC 7062-3H Epoxy Casting.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

BC 7062 are aluminum filled, low viscosity epoxy mass casting resins. These room temperature cure systems allow the user choice thicknesses of 1/8 inch to a maximum of 6 inches without foaming or yielding excessive shrinkage. Casting thicknesses may be increased by incorporating aluminum needles, puffs or granules. BC 7062, when properly cured, provides nearly perfect reproduction, resulting in a dimensionally stable, hard, tough surface. For use in constructing duplicate models, prototypes, patterns, facing dies, etc.Information provided by BCC Products, Inc.

Physical Properties	Metric	English	Comments
Specific Gravity	1.72 g/cc	1.72 g/cc
Brookfield Viscosity	3800 cP @Temperature 23.9 °C	3800 cP @Temperature 75.0 °F	Mixed
Linear Mold Shrinkage	0.0027 cm/cm	0.0027 in/in	ASTM D2566-69

Mechanical Properties	Metric	English
Hardness, Shore D	85 @Temperature 23.9 °C	85 @Temperature 75.0 °F
Tensile Strength, Ultimate	31.0 MPa	4500 psi
Flexural Strength	49.6 MPa	7200 psi
Compressive Strength	75.8 MPa	11000 psi

Thermal Properties	Metric	English	Comments
CTE, linear	75.6 µm/m-°C	42.0 µin/in-°F
Heat Distortion Temperature	52.8 °C	127 °F

Processing Properties	Metric	English	Comments
Cure Time	>= 2880 min @Temperature 24.0 °C	>= 48.0 hour @Temperature 75.2 °F
Pot Life	>= 240 min @Temperature 24.0 °C	>= 240 min @Temperature 75.2 °F	2 lb. mass

Descriptive Properties	Value	Comments
Machinability	Excellent
Mix Ratio	6:1 by weight, 2.9:1 by volume, resin/harder

Users viewing this material also viewed the following: