POLYMER SEARCH

BCC Products BC 7009-2 Epoxy Casting

Category	Polymer , Thermoset , Epoxy
Manufacturer	BCC Products
Trade Name
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	BCC Products BC 7009-2 Epoxy Casting.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

BC 7009-2 is an iron filled, low-cost mass casting system. Recommended for use in casting a minimum of two inches and a maximum of six inches in non-conductive molds. Thicknesses to nine inches in metal or conductive-type molds can successfully be achieved as well. Ideal for stretch forms, patterns, dies, molds, duplications, prototypes, etc.Information provided by BCC Products, Inc.

Physical Properties	Metric	English	Comments
Specific Gravity	2.27 g/cc	2.27 g/cc
Brookfield Viscosity	35000 cP @Temperature 23.9 °C	35000 cP @Temperature 75.0 °F	Mixed
Linear Mold Shrinkage	0.00090 cm/cm	0.00090 in/in

Mechanical Properties	Metric	English
Hardness, Shore D	85 @Temperature 23.9 °C	85 @Temperature 75.0 °F
Tensile Strength, Ultimate	37.2 MPa	5400 psi
Flexural Strength	51.0 MPa	7400 psi
Flexural Modulus	5.58 GPa	810 ksi
Compressive Strength	86.9 MPa	12600 psi

Thermal Properties	Metric	English	Comments
Deflection Temperature at 1.8 MPa (264 psi)	50.6 °C	123 °F

Processing Properties	Metric	English	Comments
Cure Time	1440 min @Temperature 24.0 °C	24.0 hour @Temperature 75.2 °F
Pot Life	240 min @Temperature 24.0 °C	240 min @Temperature 75.2 °F	15 lb. mass

Descriptive Properties	Value	Comments
Machinability	Good
Mix Ratio	12:1 by weight, 4.5:1 by volume, resin/harder

Users viewing this material also viewed the following: