- HOME
- POLYMER SEARCH
- Thermoplastic
- Nylon
- Nylon 66
- Nylon 66, Glass/Mineral Filled
- Ashley Polymers Ashlene® 69MG Nylon 66, Glass/Mineral reinforced
Ashley Polymers Ashlene® 69MG Nylon 66, Glass/Mineral reinforced
| Category | Polymer , Thermoplastic , Nylon , Nylon 66 , Nylon 66, Glass/Mineral Filled |
| Manufacturer | Ashley Polymers |
| Trade Name | Ashlene® |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Ashley Polymers Ashlene® 69MG Nylon 66, Glass/Mineral reinforced.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
A glass/mineral reinforced high flow Nylon 66 with exceptional dimensional stability.Data provided by the manufacturer
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.34 g/cc | 0.0484 lb/in³ | ASTM D792 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength, Ultimate | 65.0 MPa | 9430 psi | ATSM D638 |
| Elongation at Break | 9.0 % | 9.0 % | ASTM D638 |
| Flexural Modulus | 3.60 GPa | 522 ksi | ASTM D790 |
| Izod Impact, Notched | 1.28 J/cm | 2.40 ft-lb/in | ASTM D256 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Melting Point | 260 °C | 500 °F | ASTM D3418 |
| Deflection Temperature at 1.8 MPa (264 psi) | 146 °C | 295 °F | ASTM D648 |
Users viewing this material also viewed the following:
- Greene Tweed Avalon® 89 PTFE
- Lubrizol Advanced Materials PEARLTHANE® 11T65D Thermoplastic Polyurethane Elastomer
- Samsung Cheil Industries Starex® WR-9750H ASA, Unreinforced Extrusion Grade
- A. Schulman POLYBATCH™ Mahogany 50381 Concentrate Based in Polyethylene
- Chevron Phillips MB3150 Crystal Polystyrene
- Aclo Accutech Polypropylene Copolymer CP0437T20L Talc Reinforced
- Arlon 0.030" (0.762 mm) Silicone Traction Motor Insulation with Fiberglass Substrate (19220R030)
- Adell AL-38 Nylon 66, 40% Glass Reinforced; Mineral Filled
- Arkema Group KYNAR® 740 Black/Red Polyvinylidene Fluoride Homopolymer - Injection Molding and Extrusion
Copyright © lookpolymers.com All Rights Reserved