- HOME
- POLYMER SEARCH
- Thermoset
- Rubber or Thermoset Elastomer (TSE)
- Thermoset Fluoroelastomer
- Asahi Glass AFLAS® SZ TFE/P/VdF Fluoroelastomer
Asahi Glass AFLAS® SZ TFE/P/VdF Fluoroelastomer
| Category | Polymer , Thermoset , Fluoropolymer, TS , Thermoset Fluoroelastomer , Rubber or Thermoset Elastomer (TSE) |
| Manufacturer | Asahi Glass Company |
| Trade Name | AFLAS® |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Asahi Glass AFLAS® SZ TFE/P/VdF Fluoroelastomer.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
AFLAS® SZ/SP are terpolymers containing tetrafluoroethylene, propylene, and a small amount of vinylidene fluoride used as a cure site monomer. This combination gives AFLAS® SZ/SP a good balance of chemical resistance and improved processability when compared to AFLAS® 100/150 dipolymers. AFLAS® SZ is bisphenol-cured, while AFLAS® SP is peroxide-cured. Both polymers are categorized in ASTM D 1481-01 as class FKM, type four.Information provided by Asahi Glass Company, Inc.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.51 g/cc | 1.51 g/cc | ASTM D792 |
| Mooney Viscosity | 67 @Temperature 100 °C |
67 @Temperature 212 °F |
ML1+10 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore A | 74 | 74 | |
| Tensile Strength at Break | 19.6 MPa | 2840 psi | ASTM D638 |
| Elongation at Break | 240 % | 240 % | ASTM D638 |
| Compression Set | 35 % @Temperature 200 °C |
35 % @Temperature 392 °F |
70h |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Glass Transition Temp, Tg | -3.00 °C | 26.6 °F |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Fluorine Content % | 55 |
Users viewing this material also viewed the following:
Copyright © lookpolymers.com All Rights Reserved