- HOME
- POLYMER SEARCH
- Thermoset
- Silicone
- Silicone Rubber
- Silicone, Molded, Glass Fiber Filled
- Arlon R34066X015 0.015" (0.381 mm) Cured Silicone with Fiberglass Substrate
Arlon R34066X015 0.015" (0.381 mm) Cured Silicone with Fiberglass Substrate
| Category | Polymer , Thermoset , Silicone , Silicone Rubber , Silicone, Molded, Glass Fiber Filled |
| Manufacturer | Arlon |
| Trade Name | |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Arlon R34066X015 0.015" (0.381 mm) Cured Silicone with Fiberglass Substrate.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Design/Construction:Side 1: Platinum Cured SiliconeSide 2: Peroxide Catalyzed Silicone Appearance: Gray silicone gum on fiberglass clothThis data Represents typical values for the production material. The data should not be used to write, or in place of, material specifications.Information provided by Arlon, Silicone Technologies Division
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Thickness | 76.2 microns | 3.00 mil | Polyethylene, Interleave |
| 102 microns | 4.00 mil | Side 1 | |
| >= 127 microns | >= 5.00 mil | Side 2 | |
| 127 microns | 5.00 mil | Prime Coated 1165 Fiberglass, Substrate | |
| 343 - 419 microns | 13.5 - 16.5 mil | Overall |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Peel Strength | >= 0.877 kN/m | >= 5.00 pli | Bond Strength |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Maximum Service Temperature, Air | 232 °C | 450 °F | |
| Minimum Service Temperature, Air | -56.7 °C | -70.0 °F |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Dielectric Strength | >= 15.7 kV/mm | >= 400 kV/in |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Cure Time | 120 min @Temperature 204 °C |
2.00 hour @Temperature 400 °F |
Recommended Postcure Cycle |
| 15.0 min @Pressure 0.345 MPa, Temperature 177 °C |
0.250 hour @Pressure 50.0 psi, Temperature 350 °F |
Recommended Cure Cycle | |
| Shelf Life | 6.00 Month @Temperature 23.9 °C |
6.00 Month @Temperature 75.0 °F |
From date of manufacture |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Color | Gray | |
| Total Product Weight (oz/yd2) | 15.3 - 18.3 | |
| Uncoated Fabric Break Strength | 125 lb/in | Warp Direction, Substrate Property |
| 160 lb/in | Fill Direction, Substrate Property |
Users viewing this material also viewed the following:
Copyright © lookpolymers.com All Rights Reserved