Arlon R31310R012 Uncured Rubber with Fiberglass Substrate

Category	Polymer , Thermoset , Silicone , Silicone Rubber , Silicone, Molded, Glass Fiber Filled
Manufacturer	Arlon
Trade Name
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Arlon R31310R012 Uncured Rubber with Fiberglass Substrate.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Design/Construction:Side 1: Aluminized PET FilmSide 2: Uncured Rubber This data Represents typical values for the production material. The data should not be used to write, or in place of, material specifications.Information provided by Arlon, Silicone Technologies Division

Physical Properties	Metric	English	Comments
Thickness	25.4 microns	1.00 mil	Side 1
	38.1 microns	1.50 mil	Polyethylene, Interleave
	>= 102 microns	>= 4.00 mil	Side 2
	178 microns	7.00 mil	Prime Coated 1628 Fiberglass, Substrate

Mechanical Properties	Metric	English	Comments
Hardness, Shore A	40 - 50	40 - 50	Compound Property
Tensile Strength	5.58 - 6.83 MPa	810 - 990 psi	Compound Property
Elongation at Break	450 - 550 %	450 - 550 %	Compound Property
Peel Strength	>= 0.877 kN/m	>= 5.00 pli	Bond Strength (Rubber to Rubber)
	>= 0.877 kN/m	>= 5.00 pli	Bond Strength (Rubber to Polyester)

Thermal Properties	Metric	English	Comments
Maximum Service Temperature, Air	204 °C	400 °F
Minimum Service Temperature, Air	-56.7 °C	-70.0 °F

Electrical Properties	Metric	English	Comments
Dielectric Strength	>= 15.7 kV/mm	>= 400 kV/in

Processing Properties	Metric	English	Comments
Cure Time	15.0 min @Pressure 0.345 MPa, Temperature 177 °C	0.250 hour @Pressure 50.0 psi, Temperature 350 °F	Recommended Cure Cycle

Descriptive Properties	Value	Comments
Color	Red	Side 2
	Silver	Side 1
Total Product Weight (oz/yd2)	12 - 14
Uncoated Fabric Break Strength	200 lb/in	Fill Direction, Substrate Property
	250 lb/in	Warp Direction, Substrate Property

Users viewing this material also viewed the following: