POLYMER SEARCH

Arlon DiClad 880 PTFE/Woven Fiberglass Laminate

Category	Polymer , Thermoplastic , Fluoropolymer , PTFE
Manufacturer	Arlon
Trade Name	DiClad
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Arlon DiClad 880 PTFE/Woven Fiberglass Laminate.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Extremely Low Loss TangentExcellent Dimensional StabilityProduct Performance UniformityBenefits:Electrical Properties are highly uniform across frequencyConsistent Mechanical PerformanceExcellent Chemical ResistanceTypical Applications:Military Radar Feed NetworksCommercial Phased Array NetworksLow Loss Base Station AntennasMissile Guidance SystemsDigital Radio AntennasFilters, Couplers, LNAsInformation provided by Arlon Materials for Electronics (MED).

Physical Properties	Metric	English	Comments
Density	2.23 g/cc	0.0806 lb/in³	ASTM D792 Method A
Water Absorption	0.020 %	0.020 %	IPC TM-650 2.6.2.2
Outgassing - Total Mass Loss	0.010 % @Pressure <=1.33e-10 MPa, Temperature 125 °C	0.010 % @Pressure <=1.93e-8 psi, Temperature 257 °F	Collected Volatiles; NASA SP-R-0022A
	0.010 % @Pressure <=1.33e-10 MPa, Temperature 125 °C	0.010 % @Pressure <=1.93e-8 psi, Temperature 257 °F	Water Vapor Recovered; NASA SP-R-0022A
	0.010 % @Pressure <=1.33e-10 MPa, Temperature 125 °C	0.010 % @Pressure <=1.93e-8 psi, Temperature 257 °F	NASA SP-R-0022A

Mechanical Properties	Metric	English	Comments
Tensile Strength	51.7 MPa	7500 psi	Cross; ASTM D882
	55.8 MPa	8100 psi	Machine; ASTM D882
Modulus of Elasticity	1.39 GPa	202 ksi	Cross; ASTM D638
	1.84 GPa	267 ksi	Machine; ASTM D638
Flexural Modulus	>= 2.46 GPa	>= 357 ksi	ASTM D790
Compressive Modulus	1.63 GPa	237 ksi	ASTM D695
Peel Strength	2.45 kN/m	14.0 pli	After Thermal Stress; IPC TM-650 2.4.8

Thermal Properties	Metric	English	Comments
CTE, linear	25.0 µm/m-°C @Temperature 0.000 - 100 °C	13.9 µin/in-°F @Temperature 32.0 - 212 °F	x direction; IPC TM-650 2.4.24
	34.0 µm/m-°C @Temperature 0.000 - 100 °C	18.9 µin/in-°F @Temperature 32.0 - 212 °F	y direction; IPC TM-650 2.4.24
CTE, linear, Transverse to Flow	252 µm/m-°C @Temperature 0.000 - 100 °C	140 µin/in-°F @Temperature 32.0 - 212 °F	z direction; IPC TM-650 2.4.24
Thermal Conductivity	0.261 W/m-K @Temperature 100 °C	1.81 BTU-in/hr-ft²-°F @Temperature 212 °F	ASTM E1225
Flammability, UL94	V-0	V-0	Vertical Burn

Electrical Properties	Metric	English	Comments
Volume Resistivity	1.40e+15 ohm-cm	1.40e+15 ohm-cm	C96/35/90; IPC TM-650 2.5.17.1
Surface Resistance	2.90e+12 ohm	2.90e+12 ohm	C96/35/90; IPC TM-650 2.5.17.1
Dielectric Constant	2.17 - 2.2 @Frequency 1.00e+6 Hz	2.17 - 2.2 @Frequency 1.00e+6 Hz	C23/50; IPC TM-650 2.5.5.3
	2.17 - 2.2 @Frequency 1.00e+10 Hz	2.17 - 2.2 @Frequency 1.00e+10 Hz	C23/50; IPC TM-650 2.5.5.5
Dielectric Breakdown	>= 45000 V	>= 45000 V	D48/50; ASTM D149
Dissipation Factor	0.00080 @Frequency 1.00e+6 Hz	0.00080 @Frequency 1.00e+6 Hz	C23/50; IPC TM-650 2.5.5.3
	0.00090 @Frequency 1.00e+10 Hz	0.00090 @Frequency 1.00e+10 Hz	C23/50; IPC TM-650 2.5.5.5
Arc Resistance	>= 180 sec	>= 180 sec	D48/50; ASTM D495

Descriptive Properties	Value	Comments
Temperature Coefficient of Dielectric (ppm/°C)	-160	IPC TM-650 2.5.5.5 (-10 - 140°C)

Users viewing this material also viewed the following: