- HOME
- POLYMER SEARCH
- Nitride
- Aremco Ceramacast™ 675-N High Temperature Potting & Casting Material Aluminum Nitride
Aremco Ceramacast™ 675-N High Temperature Potting & Casting Material Aluminum Nitride
| Category | Ceramic , Nitride |
| Manufacturer | Aremco |
| Trade Name | Ceramacast™ |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Aremco Ceramacast™ 675-N High Temperature Potting & Casting Material Aluminum Nitride.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Fine grain aluminum nitride castable with high thermal conductivity.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Bulk Density | 1.26 g/cc | 0.0454 lb/in³ | Powder |
| Density | 1.80 g/cc | 0.0650 lb/in³ | |
| Porosity | <= 3.0 % | <= 3.0 % | |
| pH | 2.0 - 3.0 | 2.0 - 3.0 | |
| Viscosity | 15000 cP | 15000 cP | mixed |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Compressive Strength | 13.8 MPa | 2000 psi |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 5.22 µm/m-°C @Temperature 20.0 °C |
2.90 µin/in-°F @Temperature 68.0 °F |
|
| Maximum Service Temperature, Air | 1200 °C | 2200 °F | |
| Shrinkage | <= 0.300 % @Temperature 538 °C |
<= 0.300 % @Temperature 1000 °F |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Volume Resistivity | 1.00e+13 ohm-cm | 1.00e+13 ohm-cm | |
| Dielectric Strength | 11.8 kV/mm | 300 kV/in |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Dry Time | >= 8 hour | >= 8 hour | Air dry |
| Cure Time | 300 - 420 min | 5.00 - 7.00 hour | 2-4 hrs at 200°F; 3 hrs at 250°F |
| Pot Life | 60 - 120 min | 60 - 120 min | |
| Shelf Life | 12.0 Month | 12.0 Month |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Acid Resistance | Good | attacked by HF |
| Alkali Resistance | Good | |
| Color | Light Gray | |
| Mix Ratio | 100:16-18 | powder:liquid |
| Moisture Resistance | Good |
Users viewing this material also viewed the following:
- Nilit FRIANYL B63 W-SG30 Nylon 6 for injection molding, 30% mineral filled
- Arlon 518581R020 0.020" (0.508 mm) Uncured Silicone Rubber with Fiberglass Substrate (discontinued **)&l
- Du-Co Ceramics DC-142 Aluminum Silicate
- 3M Scotchcal™ ElectroCut™ 413 Graphic Film
- Akro-Plastic Akromid® S3 GF 30 1 (3222) PA 6.10 Dry, 30% Glass Filled
- Lubrizol ESTANE® 54630 Ether Based Thermoplastic Polyurethane (European Grade)
Copyright © lookpolymers.com All Rights Reserved