- HOME
- POLYMER SEARCH
- Thermoset
- Rubber or Thermoset Elastomer (TSE)
- ATG s.r.l. CSM Chlorosulphonated Polyethylene
ATG s.r.l. CSM Chlorosulphonated Polyethylene
| Category | Polymer , Thermoset , Rubber or Thermoset Elastomer (TSE) |
| Manufacturer | ATG s.r.l. |
| Trade Name | |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | ATG s.r.l. CSM Chlorosulphonated Polyethylene.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.20 g/cc | 1.20 g/cc |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore A | 40 - 90 | 40 - 90 | |
| Tensile Strength, Ultimate | 12.0 - 24.0 MPa | 1740 - 3480 psi | |
| Elongation at Break | 150 - 500 % | 150 - 500 % | |
| Rebound | 5.0 - 20 % | 5.0 - 20 % |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Maximum Service Temperature, Air | 120 °C | 248 °F | |
| Minimum Service Temperature, Air | -15.0 °C | 5.00 °F |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Abrasion Resistance | medium | |
| Chemical Resistance to Animal and Vegetable Oils and Greases | medium | |
| Chemical Resistance to Aromatic Hydrocarbons | low | |
| Chemical Resistance to Chloride Solvents | none | |
| Chemical Resistance to Distilled Water | medium | |
| Chemical Resistance to Ketones | low | |
| Chemical Resistance to Maximum Concentrated Alkalis (at 50°C) | high | |
| Chemical Resistance to Medium-High Concentrated Acids (at 50°C) | medium | |
| Chemical Resistance to Mineral Oils and Aliphatic Hydrocarbons | medium | |
| Compression set at 100°C | medium | |
| Impermeability at gas (Oxygen and Nitrogen) | medium | |
| Resistance to Flame | medium | |
| Resistance to Heat Aging | medium | |
| Resistance to Low Temperatures | low | |
| Resistance to Ozone and Weathering | high | |
| Tear Strength | high |
Users viewing this material also viewed the following:
- SABIC Innovative Plastics Lexan® ML104R PC (Europe-Africa-Middle East)
- Cookson Group Plaskon® AMC2 (132.203) Epoxy Molding Compound (discontinued **)
- SABIC Innovative Plastics LNP LUBRICOMP RL0019 PA 66
- Styrolution Novodur® 450 ABS
- SK Chemicals SKYTHANE® UB400 Hotmelt Lamination Film
- Solvay SOPROPHOR® K/202 Surfactant
- Westlake LF2020 Hexene Linear Low Density Polyethylene
- Dow AFFINITY™ EG 8150G Ethylene alpha-olefin copolymer
- ATI Allvac® Nickelvac® X-750 Nickel Superalloy, Heat Treatment: 1149°C (2100°F) + Age
- TSE Industries Millathane® CM Millable Polyether Urethane Rubber with 60 PHR N990 Filler
Copyright © lookpolymers.com All Rights Reserved