- HOME
- POLYMER SEARCH
- Thermoset
- Rubber or Thermoset Elastomer (TSE)
- Thermoset Polyurethane, Elastomer, Unreinforced
- ATG s.r.l. AU-EU Polyurethane Rubber
ATG s.r.l. AU-EU Polyurethane Rubber
| Category | Polymer , Thermoset , Polyurethane, TS , Thermoset Polyurethane, Elastomer, Unreinforced , Rubber or Thermoset Elastomer (TSE) |
| Manufacturer | ATG s.r.l. |
| Trade Name | |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | ATG s.r.l. AU-EU Polyurethane Rubber.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.15 g/cc | 1.15 g/cc |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore A | 50 - 95 | 50 - 95 | |
| Tensile Strength, Ultimate | 15.0 - 35.0 MPa | 2180 - 5080 psi | |
| Elongation at Break | 250 - 700 % | 250 - 700 % | |
| Rebound | 35 - 50 % | 35 - 50 % |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Maximum Service Temperature, Air | 110 °C | 230 °F | |
| Minimum Service Temperature, Air | -25.0 °C | -13.0 °F |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Abrasion Resistance | high | |
| Chemical Resistance to Animal and Vegetable Oils and Greases | high | |
| Chemical Resistance to Aromatic Hydrocarbons | medium | |
| Chemical Resistance to Chloride Solvents | low | |
| Chemical Resistance to Distilled Water | low | |
| Chemical Resistance to Ketones | low | |
| Chemical Resistance to Maximum Concentrated Alkalis (at 50°C) | none | |
| Chemical Resistance to Medium-High Concentrated Acids (at 50°C) | none | |
| Chemical Resistance to Mineral Oils and Aliphatic Hydrocarbons | high | |
| Compression set at 100°C | medium | |
| Impermeability at gas (Oxygen and Nitrogen) | medium | |
| Resistance to Flame | none | |
| Resistance to Heat Aging | medium | |
| Resistance to Low Temperatures | low | |
| Resistance to Ozone and Weathering | high | |
| Tear Strength | high |
Users viewing this material also viewed the following:
- LNP Thermocomp® STN-F-1006 HS Polyamide 46, Glass Fiber Reinforcement (discontinued **)
- Kingfa LONOY 1600 PC/PBT Alloy
- SABIC Innovative Plastics LNP Thermocomp AF0029 ABS
- SABIC Innovative Plastics LNP THERMOCOMP KZ002 Acetal
- Teknor Apex APEX® 90-A529C-72 Polyvinyl Chloride, Flexible
- SABIC Innovative Plastics LNP STAT-KON RE008 PA 66
- Polyram PlusTek PD100 Nylon 12, Injection Molding
- A. Schulman FORMION™ FI 401 Ionomer
- Diamond Polymers NYLON 6604 HS Impact Modified, Heat Stabilized
- ExxonMobil 3 Mobilux EP
Copyright © lookpolymers.com All Rights Reserved