Electrical Properties | Metric | English | Comments |
---|---|---|---|
Volume Resistivity | 5.00e+15 ohm-cm | 5.00e+15 ohm-cm | STN 34 6460 |
Plastcom SLOVAMID® 6/6T GF 35 TS PA6/6T reinforced with glass fiber, improved heat resistance PA 6/6T for injection molding, reinforced with 35% of glass fiber, for moldings with high strength and toughness used in the automotive, electrical, engineering and consumer-goods industry, improved.. |
|||
Volume Resistivity | 5.00e+15 ohm-cm | 5.00e+15 ohm-cm | IEC 60093 |
Victrex® PEEK 450GL30 Polyetheretherketone, 30% Glass Fiber, Black Product Description: High performance thermoplastic material, 30% glass fiber reinforced PolyEtherEtherKetone (PEEK), semi crystalline, granules for injection moulding and extrusion, Standard viscos.. |
|||
Volume Resistivity | 5.00e+15 ohm-cm | 5.00e+15 ohm-cm | IEC 60093 |
Lanxess Durethan® DP AKV 30 FN00 000000 Nylon 66, 30% Glass Fiber PA 66, injection molding 30% glass fibers, UL 94 V-0 at 0.4 mm, max. temperature in glow wire test: 960 °C at 0,75 mm, free from halogen and red phosphorous |
|||
Volume Resistivity | 5.00e+15 ohm-cm | 5.00e+15 ohm-cm | d.a.m.; IEC 60093 |
Lanxess Durethan® DP AKV 30 FN00 DUS013 Nylon 66, 30% Glass Fiber PA 66, 30% glass fibers, injection molding, halogen free flame retardantInformation provided by LANXESS. |
|||
Volume Resistivity | 5.00e+15 ohm-cm | 5.00e+15 ohm-cm | ASTM D257 |
Techmer ES Elastoblend® PA6 GF20 IM2 BK 20% Glass Filled (Dry) Availability: North AmericaForms: PelletsFiller/Reinforcement: Glass Fiber Reinforcement, 20% Filler by WeightAdditive: Heat Stabilizer, Impact Modifier and LubricantFeatures: Heat Stabilized, Impac.. |
|||
Volume Resistivity | 5.00e+15 ohm-cm | 5.00e+15 ohm-cm | ASTM D257 |
Techmer ES Elastoblend® PA6 GF25 IM HS L BK 25% Glass Filled Availability: North AmericaForms: PelletsFiller/Reinforcement: Glass Fiber Reinforcement, 25% Filler by WeightAdditive: Impact Modifier Features: Impact ModifiedProcessing Method: Injection MoldingI.. |
|||
Volume Resistivity | 5.00e+15 ohm-cm | 5.00e+15 ohm-cm | ASTM D257 |
Techmer ES Elastoblend® PA6 GF25 IM L 25% Glass Filled Availability: North AmericaForms: PelletsFiller/Reinforcement: Glass Fiber Reinforcement, 25% Filler by WeightAdditive: Impact Modifier Features: Impact ModifiedProcessing Method: Injection MoldingI.. |
|||
Volume Resistivity | 5.00e+15 ohm-cm | 5.00e+15 ohm-cm | ASTM D257 |
Techmer ES HiFill® PA6 GF33 IM L UV 33% Glass Filled Availability: North AmericaForms: PelletsFiller/Reinforcement: Glass Fiber Reinforcement, 33% Filler by WeightAdditive: Impact Modifier, Lubricant and UV StabilizerFeatures: Good UV Resistance, Impa.. |
|||
Volume Resistivity | 5.00e+15 ohm-cm | 5.00e+15 ohm-cm | ASTM D257 |
Techmer ES HiFill® PA6 GF60 60% Glass Filled Availability: North AmericaForms: PelletsFiller/Reinforcement: Glass Fiber Reinforcement, 60% Filler by WeightProcessing Method: Injection MoldingInformation provided by TP Composites, Inc. |
|||
Volume Resistivity | 5.00e+15 ohm-cm | 5.00e+15 ohm-cm | ASTM D257 |
Techmer ES HiFill® PA6 GF60 HS L BK 60% Glass Filled Availability: North AmericaForms: PelletsFiller/Reinforcement: Glass Fiber Reinforcement, 60% Filler by WeightAdditive: Heat StabilizerFeatures: Heat StabilizedAppearance: BlackProcessing Method: In.. |
|||
Volume Resistivity | 5.00e+15 ohm-cm | 5.00e+15 ohm-cm | ASTM D257 |
Techmer ES HiFill® PA6 GF60 L BK 60% Glass Filled Availability: North AmericaForms: PelletsFiller/Reinforcement: Glass Fiber Reinforcement, 60% Filler by WeightAdditive: LubricantFeatures: LubricatedAppearance: BlackInformation provided by TP Compo.. |
|||
Volume Resistivity | 5.00e+15 ohm-cm | 5.00e+15 ohm-cm | ASTM D257 |
Techmer ES Elastoblend® PA6 GF20 IM2 L 20% Glass Filled Availability: North AmericaForms: PelletsFiller/Reinforcement: Glass Fiber Reinforcement, 20% Filler by WeightAdditive: Impact Modifier and LubricantFeatures: Impact Modified and LubricatedTPCI# 633.. |
|||
Volume Resistivity | 5.00e+15 ohm-cm | 5.00e+15 ohm-cm | IEC 60093 |
Polyplastics Duranex® 3105 Polybutylene Terephthalate (PBT), Standard, 15% GF filled DURANEX® is a crystalline thermoplastic based on polybutylene terephthalate (PBT) that can be readily strengthened, modified, or otherwise performance enhanced through the addition of glass fibers .. |
|||
Volume Resistivity | 5.00e+15 ohm-cm | 5.00e+15 ohm-cm | |
Tra-Con Tra-Bond 2222 One-Part Surface Mount Epoxy Adhesive TRA-BOND 2222 is a solvent-free, one-part thixotropic, epoxy adhesive recommended for SMD (Surface Mount Device) bonding and sealing applications where its easy handling, high strength and superior .. |
|||
Volume Resistivity | 5.00e+15 ohm-cm | 5.00e+15 ohm-cm | |
Dow Corning HV 1520/50 KIT PARTS A&B 50 Shore Hardness injection moldable liquid silicone rubber with high tear strength, high elongation and a fast cure speedInformation provided by Dow Corning |
|||
Volume Resistivity | 5.00e+15 ohm-cm | 5.00e+15 ohm-cm | |
Dow Corning SC 102 White, non-flowing, highly filled compound, good thermal conductivity.Information provided by Dow Corning |
|||
Volume Resistivity | 5.00e+15 ohm-cm | 5.00e+15 ohm-cm | |
Dow Corning SE 4422 SILICONE RTV One-part, grey, moisture cure RTV, flowable, thermally conductive, UL V-1.Information provided by Dow Corning |
|||
Volume Resistivity | 5.00e+15 ohm-cm | 5.00e+15 ohm-cm | ASTM D257 |
ExxonMobil LDPE LD 380BA Wire & Cable Low Density Polyethylene Resin (European Grade) Product Description: LD 380BA is a non-stabilized LDPE, designed for the production of Low Voltage power cable insulation using the two-step silane cross-linking technology. Sufficient antioxidant a.. |
|||
Volume Resistivity | 5.00e+15 ohm-cm | 5.00e+15 ohm-cm | ASTM D257 |
ExxonMobil LLDPE LL 1002YB Wire & Cable Linear Low Density Polyethylene Resin Product Description: LL 1002YB is a C4 Ziegler Natta LLDPE for Low Voltage power cable and Telecom jacketing. The grade contains a higher level of antioxidants and has excellent Environmental Stress.. |
|||
Volume Resistivity | >= 5.00e+15 ohm-cm | >= 5.00e+15 ohm-cm | ASTM D257 |
Fainplast Compounds Ethylplus 619 LD Polyethylene Cable Compound Polyethelene, halogen-free cable compound with superior thermo-mechanical properties, outstanding heat resistance, and high electrical propertiesBlack LDPE SheathingInformation provided by Fainplast.. |
|||
Volume Resistivity | >= 5.00e+15 ohm-cm | >= 5.00e+15 ohm-cm | ASTM D257 |
Fainplast Compounds Ethylplus 623 HD Polyethylene Cable Compound Polyethelene, halogen-free cable compound with superior thermo-mechanical properties, outstanding heat resistance, and high electrical propertiesBlack HDPE SheathingInformation provided by Fainplast.. |
|||
Volume Resistivity | >= 5.00e+15 ohm-cm | >= 5.00e+15 ohm-cm | ASTM D257 |
Fainplast Compounds Hax™ HFX 509/1 Crosslinkable HFFR Cable Compound Polyolefin based HFFR silane grafted compound; cross-linkable by heat and moisture and by addition of suitable catalystGrade description:• Insulation for solar cablesInformation provided by Fainpla.. |
|||
Volume Resistivity | 5.00e+15 ohm-cm | 5.00e+15 ohm-cm | ASTM D257 |
Fainplast Compounds Hax™ HF 224/4 Flame Retardant Polyolefin Cable Compound Thermoplastic halogen free flame retardant compound based on polyolefins and mineral fillersGrade description:Sheathing, insulation, high flexibilityInformation provided by Fainplast Compounds |
|||
Volume Resistivity | >= 5.00e+15 ohm-cm | >= 5.00e+15 ohm-cm | ASTM D257 |
Fainplast Compounds Hax™ HFX 521 Crosslinkable HFFR Cable Compound Polyolefin based HFFR silane grafted compound; cross-linkable by heat and moisture and by addition of suitable catalystGrade description:• Oil resistant sheathingInformation provided by Fainplast C.. |
|||
Volume Resistivity | 5.00e+15 ohm-cm @Thickness 3.00 mm |
5.00e+15 ohm-cm @Thickness 0.118 in |
IEC 60093 |
Ascend Performance Materials Vydyne® 66B, 66J Nylon 66, Dry as Molded Vydyne® 66B and 66J are members of a family of unreinforced extrusion grade Nylon 66 resins. They are available in natural color. These resins offer high strength, rigidity, and toughness for a bro.. |
|||
Volume Resistivity | 5.00e+15 ohm-cm | 5.00e+15 ohm-cm | IEC 93 |
BASF Ultradur® B 6550 LN PBT Description: High-viscosity grades for the extrusion of loose buffer tubes for optical fibers, semi-finished products for machining, profiles and pipes.Information provided by BASF |
|||
Volume Resistivity | 5.00e+15 ohm-cm | 5.00e+15 ohm-cm | 3.30 mm; ASTM D257 |
ExxonMobil Santoprene® 101-64 Thermoplastic Elastomer Product Description: A soft, black, versatile thermoplastic vulcanizate (TPV) in the thermoplastic elastomer (TPE) family. This material combines good physical properties and chemical resistance for.. |
|||
Volume Resistivity | 5.00e+15 ohm-cm | 5.00e+15 ohm-cm | ASTM D257 |
PolyOne Edgetek® SF-35GF-25MN/000 L Polyphenylene Sulfide (PPS), Glass/Mineral Filled
(discontinued **) Description/Features:Glass/Mineral ReinforcedPTFE LubricatedUL 94 V0PolyOne First ChoiceInformation provided by PolyOne Corporation. |
|||
Volume Resistivity | 5.00e+15 ohm-cm | 5.00e+15 ohm-cm | IEC 60093 |
Victrex® PEEK 150GL30 Black Polyetheretherketone, 30% Glass Fiber Reinforced Product Description:High performance thermoplastic material, 30% glass fibre reinforced Polyetheretherketone (PEEK), semi crystalline, granules for injection moulding, easy flow, FDA food contact co.. |