Polymer Property : Dielectric Strength = 39.0 kV/mm Product List

Electrical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.

Electrical Properties	Metric	English	Comments
Dielectric Strength	39.0 kV/mm	991 kV/in	ASTM D149
PolyOne Syncure™ System S110FV Polyethylene, Crosslinked (XLPE) Syncure™ systems are two part moisture crosslinkable compounds, is a UL bulletinized high strength, highly flame retardant insulation compound. Available in a RoHS complaint version.NOTE: The above..
Dielectric Strength	39.0 kV/mm	991 kV/in	ASTM D149
PolyOne Syncure™ System S112BL Polyethylene, Crosslinked (XLPE) Syncure™ systems are two part moisture crosslinkable compounds. S112BL is a CSA listed, high strength, weather resistant, black (2.5% carbon black) cable insulation compound. RoHS compliant.STORAGE..
Dielectric Strength	39.0 kV/mm	990 kV/in	ASTM D149
Polymer Resources TP-FR2 Polybutylene Terephthalate, Flame Retardant Polybutylene Terephthalate, Flame Retardant Process: Injection MoldingNotes: All physical, mechanical and thermal testing conducted on 1/8-inch thick, un-pigmented, test samples.Information provided..
Dielectric Strength	39.0 - 49.0 kV/mm	991 - 1240 kV/in	Average value: 44.7 kV/mm Grade Count:3
Overview of materials for Thermoplastic Polyurethane, Elastomer, Ether Grade This property data is a summary of similar materials in the MatWeb database for the category "Thermoplastic Polyurethane, Elastomer, Ether Grade". Each property range of values reported is minimum a..
Dielectric Strength	39.0 - 122 kV/mm	991 - 3100 kV/in	Average value: 78.8 kV/mm Grade Count:6
Overview of materials for Solventless Epoxy Varnish, Electrical Insulation This property data is a summary of similar materials in the MatWeb database for the category "Solventless Epoxy Varnish, Electrical Insulation". Each property range of values reported is minimum and..
Dielectric Strength	39.0 kV/mm	991 kV/in	ASTM D149
Solvay Specialty Polymers PolidiemmeÂ® G/420 Thermoset Elastomer (TSE) PolidiemmeÂ® XLPO -Cross-linkable Polyolefin. Elastomer based compound crosslinkable by ambient moisture, consisting of a silane pregrafted base compound to be used with a catalyst masterbatch (Si..
Dielectric Strength	39.0 kV/mm @Thickness 1.57 mm	991 kV/in @Thickness 0.0618 in	ASTM D149
Solvay Specialty Polymers XydarÂ® G-930 Liquid Crystal Polymer (LCP), 30% Glass Fiber XydarÂ® G-930 Liquid Crystal Polymer (LCP) is a glass reinforced injection molding grade developed specifically for electrical/electronic applications utilizing surface mount technology.The moldab..
Dielectric Strength	39.0 kV/mm	991 kV/in	K20/P50; IEC 60243-1
Styrolution LuranÂ® 378 P G7 35% Glass Filled SAN Description: Glass-reinforced grade with very high stiffness and low thermal coefficient of liner expansion.Information provided by STYROLUTION, which is a joint venture between BASF and INEOS
Dielectric Strength	39.0 kV/mm @Thickness 1.50 mm	991 kV/in @Thickness 0.0591 in	Short Time; IEC 60243-1
Styrolution NovodurÂ® HH-106 ABS Novodur HH-106 is a high heat injection molding grade providing a balanced property profile.Information provided by Styrolution
Dielectric Strength	39.0 kV/mm @Thickness 1.00 mm	991 kV/in @Thickness 0.0394 in	IEC 60243-1
Unitika A1022GFL15 PA6, 15% Glass Fiber Reinforced, Dry Information provided by Unitika Ltd.
Dielectric Strength	39.0 kV/mm	991 kV/in
Von Roll Isola IMI Varnish 74010A Epoxy Varnish for Electrical Insulation Data provided by Von Roll Isola USA.Flash Point: 19°C. Average solids: 60%. Usage Notes: Use with IMI 74010 hardener for final coat over field coils, windings, and heavy duty motors.
Dielectric Strength	39.0 kV/mm	991 kV/in	ASTM D149
Unitika U-100 Engineering Plastic CAS No: 26590-50-1Information provided by Unitika Ltd.
Dielectric Strength	39.0 kV/mm	991 kV/in	dry; IEC 60243-1
EMS-Grivory Grivory® 1SBVX-50H LDS black PA1010-GF50 Product Description: Grilamid 1SBVX-50H LDS black is a 50% glass fiber reinforced Polyamide 1010 injection molding grade. This grade is specifically optimized for the laser Direct Structuring techno..
Dielectric Strength	39.0 kV/mm	991 kV/in	dry; IEC 60243-1
EMS-Grivory Grivory® AG-30 H PA66 Product description: Grilon AG-30 H black 9836 is a normal viscosity, specially heat stabilized PA 66 injection molding grade with 30% glass fibres. Grilon AG-30 H black 9836 has the following impor..
Dielectric Strength	39.0 kV/mm	991 kV/in	conditioned; IEC 60243-1
EMS-Grivory Grivory® BFZ 3 PA6 Product description: Grilon BFZ 3 is an unreinforced, high impact resistant PA6 extrusion grade. Grilon BFZ 3 has the following important properties: Extreme toughnessEasy processingLow density Gril..
Dielectric Strength	39.0 kV/mm	991 kV/in	conditioned; IEC 60243-1
EMS-Grivory Grivory® XE 3982 PA12 Product description: Grilamid XE 3982 is a highly flexible extrusion grade, based on Polyamide 12 with following main attributes: High flexibilityLow plasticizer migration (low blooming)Very good ch..
Dielectric Strength	39.0 kV/mm	991 kV/in	dry; IEC 60243-1
EMS-Grivory Grivory® XE 4181 nat PA1010 Product description: Grilamid XE 4181 natural is a unreinforced, high viscosity, plasticized, high impact resistant polyamide 1010 (PA1010) extrusion grade. Grilamid XE 4181 natural is highly resist..
Dielectric Strength	39.0 kV/mm	991 kV/in	50%RH; IEC 60243-1
DuPont Performance Polymers Zytel® ST801 NC010A Nylon 66 (Unverified Data**) Super Toughened Polyamide 6 Zytel ST801 is an unreinforced super tough polyamide 66 for injection molding and extrusion. It offers outstanding break resistance over a wide temperature and humidity r..
Dielectric Strength	39.0 kV/mm	991 kV/in
Arkema Group Pebax® 4033 SN 01 Polyether Block Amide (PEBA) (Dry) POLYETHER BLOCK AMIDE (PEBA) hardness 40 shore D Non plasticized flexible Polyamide Outstanding mechanical properties at low temperature (-40°C) Applications: molded parts for sport goods (softness..
Dielectric Strength	39.0 kV/mm	990 kV/in	ASTM D149
Arlon Thermabond® 48781A008 0.008" (0.203 mm) Uncured Silicone Rubber with Fiberglass Substrate Description: Generation II Thermabond® NP electrically insulating electronic adhesive. Bonds without primer.Design/Construction: Liner 1: PolyethyleneSide 1: Uncured Silicone RubberSubstrate: Style..
Dielectric Strength	39.0 kV/mm	990 kV/in	ASTM D149
Arlon Thermabond® R36211A008 0.008" (0.203 mm) Uncured Silicone Rubber with Fiberglass Substrate Description: Generation II Thermabond® NP electrically insulating electronic adhesive. Bonds without primerDesign/Construction: Liner 1: Polyethylene Side 1: Uncured Silicone Rubber Substrate: St..
Dielectric Strength	39.0 kV/mm	991 kV/in
Arkema Group Orgalloy® LT 4060IH Flexible Nylon Alloy (Conditioned) Very flexible polyamide alloy: easy to process, low moisture absorption, good mechanical properties at low temperature. Demonstrate a good balance of properties eg, high flexibility (200 MPa), good ..
Dielectric Strength	39.0 kV/mm	991 kV/in	DIN 53481/VDE 0303
BASF Elastollan® 1180A Polyether Type Polyurethane Elastomer Processed by extrusion or injection molding. Elastollan ® 1100 series products are FDA Sec. 177.2600 compliant. Elastollan 1100 series of products are polyether-based thermoplastic polyurethanes...
Dielectric Strength	39.0 kV/mm	991 kV/in	IEC 243/1
BASF Ultradur® B 6550 LN PBT Description: High-viscosity grades for the extrusion of loose buffer tubes for optical fibers, semi-finished products for machining, profiles and pipes.Information provided by BASF
Dielectric Strength	39.0 kV/mm	991 kV/in	ASTM D149
PolyOne Syncure™ System S100FH Polyethylene, Crosslinked (XLPE) Syncure™ systems are two part moisture crosslinkable compounds. S100FH is a UL bulletinized, flame retardant cable insulation compound. Available in a RoHS compliant version.NOTE: The above represe..
Dielectric Strength	39.0 kV/mm @Thickness 1.57 mm	991 kV/in @Thickness 0.0618 in	ASTM D149
Solvay Specialty Polymers Xydar® G-930 Liquid Crystal Polymer (LCP) (Unverified Data**) Xydar G-930 Liquid Crystal Polymer (LCP) is a glass reinforced injection molding grade developed specifically for electrical/electronic applications utilizing surface mount technology. The moldabili..
Dielectric Strength	39.0 kV/mm	991 kV/in	ASTM D149
PolyOne Syncure™ System S100NA Polyethylene, Crosslinked (XLPE) Syncure™ systems are two part moisture crosslinkable compounds, UL bulletinized easy processing, high strength, colorable cable insulation compound suitable for service entrance cables. RoHS compli..
Dielectric Strength	39.0 kV/mm	991 kV/in	ASTM D149
PolyOne Syncure™ System S110FV-UV Polyethylene, Crosslinked (XLPE) Syncure™ systems are two part moisture crosslinkable insulation compounds. S110FV-UV is a UL bulletinized, RoHS compliant, high strength, highly flame retardant insulation compound. Available in bl..
Dielectric Strength	39.0 kV/mm	991 kV/in	ASTM D149
PolyOne Syncure™ System S112NA Polyethylene, Crosslinked (XLPE) Syncure™ systems are two part moisture crosslinkable compounds. S112NA is a CSA listed, high strength, colorable power cable insulation compound and RoHS compliant.NOTE: The above represents Typica..