Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Polymer Property : Dielectric Strength = 30.0 kV/mm Product List

Electrical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.
Electrical Properties Metric English Comments
Dielectric Strength 30.0 kV/mm
762 kV/in
Dry; IEC 60243
Polimeri Europa Sinkral® B 432/E ABS Resin
Sinkral B 432/E is a general purpose extrusion grade which exhibits a good balance between rigidity and toughness. Designation: Thermoplastic ISO 2580-ABS 1,EGN,105-04-16-20Applications: Large sheet..
Dielectric Strength 30.0 kV/mm
762 kV/in
IEC 60243-1
Menzolit Menzolit® BMC 0410 Unsaturated Polyester UP
BMC 0410 is a low profile BMC with zero shrinkage and low coefficient of thermal expansion. It is especially suited for precision mouldings in office and communication equipment. The combination of ..
Dielectric Strength 30.0 kV/mm
762 kV/in
Conditioned; IEC 60243-1
Lanxess Durethan® BC 40 SR2 000000 Nylon 6
PA 6 injection molding grade, high viscosity, non-reinforced, higher notched impact strength than BC 30, impact-modified
Dielectric Strength 30.0 kV/mm
762 kV/in
IEC 60243-1
Menzolit Menzolit® BMC 3000 Unsaturated Polyester UP
BMC 3000 is a special BMC suitable for the use in microwave and cookware applications.It has high temperature resistance, and meets requirements for food contact applications. It has a high gloss fi..
Dielectric Strength 30.0 kV/mm
762 kV/in
IEC 60243
Solvay TECHNYL® C 50 H2 PA6, Conditioned
Description: TECHNYL® C 50H2 is a unreinforced melamine cyanurate flame retarded polyamide 6. This product is heat stabilized and can be used for injection molding and extrusion processes. This p..
Dielectric Strength 30.0 kV/mm
762 kV/in
ASTM D149
Samyang Trirex® 3030PJ Polycarbonate
PC is characterized by its excellent impact resistance, dimensional stability and excellent thermal resistance.3030PJ is a high viscosity gradeInformation provided by Samyang.
Dielectric Strength 30.0 kV/mm
762 kV/in
IEC 60243
Solvay TECHNYL® A 216 S30 PA66, 30% glass spheres, DRY
Description: Polyamide 66, reinforced with 30% of glass spheres, for injection molding.Available in: EuropeProduct Applications: TECHNYL® A 216 S30 is used in all sectors of industry, offering an..
Dielectric Strength 30.0 kV/mm
762 kV/in
IEC 243
Vyncolit 2923 W Novolac Phenolic
Mineral filled phenolic molding compound with excellent heat resistance and dimensional stability.Information provided by Vyncolit, a Sumitomo Bakelite Group
Dielectric Strength 30.0 kV/mm
762 kV/in
IEC 243
Vyncolit X658 Novolac Phenolic
Glass fiber and mineral filled phenolic molding compound with excellent mechanical and thermal properties and a very good dimensional stability.USES: Complex precision parts.Information provided by ..
Dielectric Strength 30.0 kV/mm
762 kV/in
IEC 60250
Polyram PlusTek RA303G50 Nylon 66 for Injection Molding, 50% Glass Fiber Reinforced, Heat Stabilized, Hydrolysis Resistant
50% Glass fiber reinforced, heat stabilized and hydrolysis resistant Nylon 66 for injection molding applications.Information provided by Polyram.
Dielectric Strength 30.0 kV/mm
762 kV/in
VDE 0303/4
Polyram RamTough PZ740 Polycarbonate, UV Stabilized
UV stabilized low viscosity polycarbonate for injection molding applicationsInformation provided by Polyram Ram On Ind.
Dielectric Strength 30.0 kV/mm
762 kV/in
JIS K2111
Toyobo PELPRENE™ S9002 Polyester TPE, Ultra Heat-resistant
Features: Polyester TPE, Ultra Heat-resistantInformation provided by Toyobo.
Dielectric Strength 30.0 kV/mm

@Thickness 1.00 mm
762 kV/in

@Thickness 0.0394 in
IEC 60243-1
Covestro Bayblend® FR3009 PC/ABS Blend
Main characteristics:• High toughness even at low temperatures• High dimensional accuracy and stability• Good paintability• Good flowabilityGrade characteristics:• Flame-retardant• Injec..
Dielectric Strength 30.0 kV/mm
762 kV/in
dry; IEC 60243-1
DSM Akulon® F-X9183 PA6
Low/Medium Viscosity
Dielectric Strength 30.0 kV/mm
762 kV/in
Covestro Makrolon® 2807 Polycarbonate, Injection Grade
Medium flowing injection molding grade with easy mold release and UV stabilizer.Information provided by Bayer.As of 1 September 2015, Bayer MaterialScience was separated from Bayer AG and officially..
Dielectric Strength 30.0 kV/mm
762 kV/in
Covestro Makrolon® 6870 Polycarbonate
Pseudoplastic behavior and high viscosity extrusion and injection molding grade, less resistant to UV than e.g. MAKROLON 6555.Information provided by Bayer.As of 1 September 2015, Bayer MaterialScie..
Dielectric Strength 30.0 kV/mm
762 kV/in
IEC 60243-1
DSM Stanyl® TW200F6 (DAM) Nylon 46 30% Glass Reinforced, Heat Stabilized (North America)
Information provided by DSM Engineering Plastics.
Dielectric Strength 30.0 kV/mm
762 kV/in
IEC 243-1
CP-Polymer-Technik Wellamid® 6000/58 HWUVCP Nylon 6, Impact Modified Until -40°C, UV Stabilized, Heat Stabilized, Dry
Information provided by CP-Polymer-Technik GmbH & Co. KG
Dielectric Strength 30.0 kV/mm
762 kV/in
IEC 60243-1
DSM Stanyl® TW200F6 Nylon 46-30% Glass Reinforced (European Grade) (Dry)
Stanyl is a high performance polyamide providing good performance and value across a broad range of automotive and electronic applications. Stanyl offers:Highest mechanical properties at high temper..
Dielectric Strength 30.0 kV/mm
762 kV/in
conditioned; IEC 60243-1
EMS-Grivory Grivory® XE 4073 nat PA610
Product description: Grilamid XE 4073 natural is a unreinforced, heat and UV stabilized polyamide 610 (PA610) injection molding grade. This product is to a large extent based on renewable raw materi..
Dielectric Strength 30.0 kV/mm
762 kV/in
conditioned; IEC 60243-1
EMS-Grivory Grivory® XE 4164 black 9225 PA*-GF30
Product description: Grivory XE 4164 black 9225 is a 30% glass fiber reinforced engineering thermoplastic material based on a semicrystalline, partially aromatic copolyamide. ISO polymer designation..
Dielectric Strength 30.0 kV/mm
762 kV/in
No thickness given
ConocoPhillips Hydroclear® 150 Multipurpose R&O Oil, AGMA Lubricant No. 4
Description: Conoco Hydroclear Multipurpose R&O Oil is a rust- and oxidationinhibited industrial oil with ashless wear protection formulated from premium Conoco hydrocracked base stocks. Hydroclear ..
Dielectric Strength 30.0 kV/mm
762 kV/in
Covestro Bayblend® KL 1-1427 Polycarbonate/ABS Blend
Glass fiber reinforced grade (30%) with high stiffness.Information provided by Bayer.As of 1 September 2015, Bayer MaterialScience was separated from Bayer AG and officially adopted its new name – ..
Dielectric Strength 30.0 kV/mm
762 kV/in
conditioned; IEC 60243-1
EMS-Grivory Grivory® XE 5004 (BM-30/2 UV) PA666-MD30
Product description: Grilon XE 5004 is a normal viscosity PA6 injection molding grade with 30% mineral reinforcement, which is additionally UV stabilized. Grilon XE 5004 has the following important ..
Dielectric Strength 30.0 kV/mm
762 kV/in
Arkema Group Rilsan® BMV Nylon 11 (Conditioned)
Designation ISO 1874-PA11,M,18-010Rigid grade for injection molding. Available color: natural. Free additive.High impact strength. Easy filling of the mold due to its well adapted melt viscosity. Lo..
Dielectric Strength 30.0 kV/mm
762 kV/in
Arkema Group Rilsan® Powder D40 Natural Nylon 11, Coating Grade
Powder D40 NATURAL - RILSAN POLYAMIDE 11 (PA11) POWDERUnpigmented and clear Powder as an additive for paints. Improves the scratch and abrasion resistance of paints. Allows for different texture d..
Dielectric Strength 30.0 kV/mm
762 kV/in
Conditioned; CEI 60243-1
Addiplast Addinyl B2 ZV20 Nylon 6, 20% Glass Filled
Glass fiber reinforced, increased thermal aging stabilityInformation provided by Addiplast.
Dielectric Strength 30.0 kV/mm
762 kV/in
CEI 60243-1
Addiplast Addinyl A2 ZG30 Nylon 66, 30% Glass Bead
Glass bead reinforced, improved stiffness and dimensional stability, increased thermal aging stabilityInformation provided by Addiplast.
Dielectric Strength 30.0 kV/mm

@Thickness 2.00 mm
762 kV/in

@Thickness 0.0787 in
ASTM D149
Beijing Chemical Industry KAIFA® MN201-G25 Nylon 66 Resin
25% glass fiber reinforced, thermal resistantInformation provided by Beijing Chemical Industry Research Institute (Group)
Dielectric Strength 30.0 kV/mm

@Thickness 1.00 mm
762 kV/in

@Thickness 0.0394 in
IEC 60243-P1
Hexion Bakelite™ PF 4111 Phenolic Formaldehyde Resin, Improved Electrical Properties, Ammonia Free, Resistant to High Temperatures, Low Shrinkage, High Arc Resistance, UL Listed, Acetic Acid Free, Copper Adhesive
Phenolic molding compound, inorganically filled, glass fiber reinforced, ammonia and acetic acid free, electrically high grade, high temperature stability, high mechanical strength, copper-adhesive,..
Copyright © lookpolymers.com All Rights Reserved