Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Polymer Property : Dielectric Strength = 2540 kV/in Product List

Electrical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.
Electrical Properties Metric English Comments
Dielectric Strength 100 kV/mm
2540 kV/in
ISO.243 DIN.53481
Omnia Plastica PP Polypropylene
The mechanical features of PP are better than those of PE H.D. It withstands attack by alkali and acids and consequently it is widely used for components in the chemical industry when a moderate str..
Dielectric Strength 100 kV/mm
2540 kV/in
IEC 60243-1
PolyOne Bergamid™ B70 W25 Polyamide 6 (Nylon 6)
Information provided by PolyOne
Dielectric Strength 100 kV/mm
2540 kV/in
DIN 53481
Schwartz Technical Plastics LAMIGAMID® 700 Ultra High Molecular Weight Polyethylene
Application: wear liners, sliding platesInformation provided by Schwartz Technical Plastics GmbH
Dielectric Strength >= 100 kV/mm
>= 2540 kV/in
Grade A
Shandong Dongyue Polymer DF-11 PTFE Molding Powder (Micronized Particles)
Usage: The resin is mainly used as an insulating film for electric applications, the products of thin wall, seal, gasket, club, panel, tube, axletree, seal ring, and loop.Packing: PTFE is packed in ..
Dielectric Strength 100 kV/mm
2540 kV/in
IEC 60250
Polyram PlusTek PA803 Nylon 6.6 for Injection Molding, Impact Modified
Impact modified Nylon 6.6 for injection molding application.Information provided by Polyram.
Dielectric Strength 100 kV/mm
2540 kV/in
IEC 60250
Polyram PlusTek PA804 Nylon 6.6 for Injection Molding, Impact Modified
Impact modified Nylon 6.6 for injection molding application.Information provided by Polyram.
Dielectric Strength 100 kV/mm
2540 kV/in
VDE 0303/4
Polyram PlusTek PA841 Nylon 6.6, Impact Modified
Impact modified polyamide 6.6 for injection molding applicationsInformation provided by Polyram Ram On Ind.
Dielectric Strength 100 kV/mm
2540 kV/in
VDE 0303/4
Polyram PlusTek PB140 Nylon 6, Injection Molding
Polyamide 6 for injection molding applicationsInformation provided by Polyram Ram On Ind.
Dielectric Strength 100 kV/mm
2540 kV/in
VDE 0303/4
Polyram PlusTek PB150 Nylon 6, Injection Molding
Fast cycle polyamide 6 for injection molding applicationsInformation provided by Polyram Ram On Ind.
Dielectric Strength 100 kV/mm
2540 kV/in
VDE 0303/4
Polyram PlusTek PB702 Nylon 6, UV Stabilized
Polyamide 6 UV stabilized for fast cycle injection molding applicationsInformation provided by Polyram Ram On Ind.
Dielectric Strength 100 kV/mm
2540 kV/in
VDE 0303/4
Polyram PlusTek PB891 Nylon 6, Impact Modified
Impact modified polyamide 6 for injection molding applicationsInformation provided by Polyram Ram On Ind.
Dielectric Strength 100 kV/mm
2540 kV/in
VDE 0303/4
Polyram PlusTek PB350M4 Nylon 6, 20% Mineral Filled
20% mineral filled polyamide 6 for injection molding applicationsInformation provided by Polyram Ram On Ind.
Dielectric Strength 100 kV/mm
2540 kV/in
VDE 0303/4
Polyram PlusTek PB500 Nylon 6, Flame Retardant
Flame retardant polyamide 6 for injection molding applicationsInformation provided by Polyram Ram On Ind.
Dielectric Strength 100 kV/mm
2540 kV/in
VDE 0303/4
Polyram PlusTek PB801 Nylon 6, Impact Modified
impact modified polyamide 6 for injection molding applicationsInformation provided by Polyram Ram On Ind.
Dielectric Strength 100 kV/mm
2540 kV/in
IEC 60250
Polyram PlusTek PB845 Nylon 6 for Injection Molding, Impact Modified
Impact modified Nylon 6 for injection molding applications.Information provided by Polyram.
Dielectric Strength 100 kV/mm
2540 kV/in
VDE 0303/4
Polyram PlusTek PB901 Nylon 6, Extruded cable coating
Polyamide 6 for very thin electrical extruded cable coatingInformation provided by Polyram Ram On Ind.
Dielectric Strength 100 kV/mm
2540 kV/in
VDE 0303/4
Polyram PlusTek PD100 Nylon 12, Injection Molding
Outstanding polyamide 12 for injection molding applications.Information provided by Polyram Ram On Ind.
Dielectric Strength 100 kV/mm
2540 kV/in
Breakdown; DIN 53 481, IEC-243, VDE 0303 Part 1
Hippe PP Polypropylene
Lower density compared with PE. Higher hardness and stiffness and better reset features. Non-fragile. Toughness in cold lesser than that of PE. Higher working temperatures than PE, not aromatic-..
Dielectric Strength 100 kV/mm
2540 kV/in
IEC 243/1
BASF Ultradur B 4300 G2 10% Glass Filled PBT
Ultradur B4300 G2 is an easy flowing injection molding PBT with 10% glass fiber reinforcement for rigid, tough, and dimensionally stable parts.Applications: Program switches, thermostat parts, small..
Dielectric Strength 100 kV/mm
2540 kV/in
IEC 112
BASF Ultradur B 4300 G4 20% Glass Filled PBT
Ultradur B4300 G4 is an easy flowing injection molding PBT with 20% glass fiber reinforcement for rigid, tough, and dimensionally stable parts.Applications: Program switches, thermostat parts, small..
Dielectric Strength 100 kV/mm
2540 kV/in
IEC 243/1
BASF Ultradur® B 4300 M5 25% Mineral Filled PBT
Description: Is a PBT-HI, injection-molding grade reinforced with 25% of minerals, for the production of parts with good surface quality and low warpage, e.g. housings and visible parts of domestic ..
Dielectric Strength 100 - 200 kV/mm
2540 - 5080 kV/in
Thickness up to 1 µm
BACT DLC Diamond-Like Coating
DLC (a-C:H). This coating provides the highest hardness and abrasion resistance of the BACT products. Typical applications include high wear environments involving seals, molds, metal forming, and..
Dielectric Strength 100 - 350 kV/mm
2540 - 8890 kV/in
Thickness up to 1 µm
BACT Dylyn® Diamond-Like Nanocomposite Coating
a-C:H/a-Si:O nanocomposite. This coating provides the lowest friction of the BACT products, even in high humidity or wet environments. It offers an excellent combination of anti-stick and wear be..
Dielectric Strength 100 kV/mm
2540 kV/in
ASTM D149
Solvay Specialty Polymers Algoflon® F3140 X PTFE (Polytetrafluoroethylene)  (discontinued **)
Data provided by the manufacturer.Type II Classification. Suspension polymer powder grade recommended for compression molding and extrusion. PTFE possesses high inertness, excellent dielectric prope..
Dielectric Strength >= 100 kV/mm
>= 2540 kV/in
CeramTec Ceramtape GC Glass Ceramic
LTCC (Low Temperature Cofired Ceramic) is a new type of ceramic film developed by CeramTec AG's Electronics division. With the aid of these ceramics and their almost shrinkage-free sintering process..
Dielectric Strength 100 kV/mm
2540 kV/in
IEC 243/1
BASF Ultradur® B 4300 GM42 20/10% Glass/Mineral Filled PBT
Description: Is a PBT-HI, mixed glass-fiber-reinforced and mineral-reinforced injection-molding grade with good surface quality and rigidity, and with low warpage for parts such as housings and PCBs..
Dielectric Strength 100 kV/mm
2540 kV/in
IEC 243/1
BASF Ultradur® B 4300 K6 30% Glass Bead Filled PBT
Description: Is a PBT + ASA, Injection-molding grades containing 30% of glass beads for industrial parts with low warpage.Applications: Precision parts for optical instruments, fuel tank sensor unit..
Dielectric Strength 100 kV/mm
2540 kV/in
IEC 243/1
BASF Ultradur B 4300 G6 30% Glass Filled PBT
Ultradur B4300 G6 is an easy flowing injection molding PBT with 30% glass fiber reinforcement for rigid, tough, and dimensionally stable parts.Applications: Program switches, thermostat parts, small..
Dielectric Strength 100 kV/mm
2540 kV/in
IEC 243/1
BASF Ultradur® B 4300 G10 50% Glass Filled PBT
Description: Injection-molding grades containing 50% of glass fibers, for industrial parts, rigid, tough and dimensionally stable, for example for program switches, thermostat parts, small-motor hou..
Copyright © lookpolymers.com All Rights Reserved