Electrical Properties | Metric | English | Comments |
---|---|---|---|
Electrical Resistivity | <= 10000 ohm-cm | <= 10000 ohm-cm | dry; IEC 60093 |
Murtfeldt Murytal® ESD Acetal Copolymer, Conductive Additives make this material conductive. The mechanical properties of the material are retained almost in their entirety. Special Properties:• High rigidity• Excellent ability to regain its form•.. |
|||
Electrical Resistivity | <= 10000 ohm-cm | <= 10000 ohm-cm | IEC 60093 |
Murtfeldt Original Material ”S”® plus + ESD Polyethylene, Conductive Material ”S”® plus+ ESD has extremely low electrical resistance and is an optimum conductor. Full voltage dissipation for earthed components at maximum speed enables safe, spark-free work. This m.. |
|||
Electrical Resistivity | 10000 ohm-cm | 10000 ohm-cm | |
Nabaltec APYRAL® 120E Al(OH)3 APYRAL ® from Nabaltec is an environmentally friendly halogen free product which is used as a flame retardant filler in a wide variety of rubber and polymeric materials. During thermal decompositio.. |
|||
Electrical Resistivity | 10000 - 1.00e+16 ohm-cm | 10000 - 1.00e+16 ohm-cm | Average value: 4.21e+15 ohm-cm Grade Count:6 |
Overview of materials for Polyetheretherketone, PEEK, Aramid Fiber Filled This property data is a summary of similar materials in the MatWeb database for the category "Polyetheretherketone, PEEK, Aramid Fiber Filled". Each property range of values reported is minimum and .. |
|||
Electrical Resistivity | 10000 - 1.00e+6 ohm-cm | 10000 - 1.00e+6 ohm-cm | ASTM D257 |
PolyOne Edgetek® AS- 08CF / 000 ABS - 8% Carbon Fiber Reinforced With ESD Properties
(discontinued **) Data provided by PolyOne. |
|||
Electrical Resistivity | 10000 - 3.50e+16 ohm-cm | 10000 - 3.50e+16 ohm-cm | Average value: 5.54e+15 ohm-cm Grade Count:26 |
Overview of materials for Polycarbonate/ABS Alloy, Glass Fiber Filled This property data is a summary of similar materials in the MatWeb database for the category "Polycarbonate/ABS Alloy, Glass Fiber Filled". Each property range of values reported is minimum and maxi.. |
|||
Electrical Resistivity | 10000 ohm-cm - 1e+05 | 10000 ohm-cm - 1e+05 | ASTM D257 |
PolyOne Edgetek® MLS-195A Polysulfone Alloy - ESD Material
(discontinued **) Data provided by PolyOne. |
|||
Electrical Resistivity | 10000 ohm-cm | 10000 ohm-cm | ASTM D257 |
Solvay Specialty Polymers Algoflon® 25CAR+5CER PTFE; Petroleum Coke and Ceramic Filled
(discontinued **) Data provided by the manufacturer.25 wt.% Petroleum Coke + 5 wt.% Ceramic. Suspension polymer powder grade recommended for compression molding. Pure PTFE possesses high inertness, excellent dielectr.. |
|||
Electrical Resistivity | 10000 - 1.00e+15 ohm-cm | 10000 - 1.00e+15 ohm-cm | Average value: 8.57e+14 ohm-cm Grade Count:7 |
Overview of materials for High Density Polyethylene (HDPE), Blow Molding Grade This property data is a summary of similar materials in the MatWeb database for the category "High Density Polyethylene (HDPE), Blow Molding Grade". Each property range of values reported is minimum.. |
|||
Electrical Resistivity | 10000 - 8.10e+16 ohm-cm | 10000 - 8.10e+16 ohm-cm | Average value: 6.23e+15 ohm-cm Grade Count:13 |
Overview of materials for Polytetrafluoroethylene (PTFE), Bronze Filled This property data is a summary of similar materials in the MatWeb database for the category "Polytetrafluoroethylene (PTFE), Bronze Filled". Each property range of values reported is minimum and ma.. |
|||
Electrical Resistivity | 10000 ohm-cm | 10000 ohm-cm | IEC 60093 |
3M Dyneon™ TF 4220 PTFE 2% Cond. Pigm. Filled
(discontinued **) Applications include antistat linings, seals, gaskets, moldings.Data provided by Dyneon. |
|||
Electrical Resistivity | 10000 ohm-cm | 10000 ohm-cm | IEC 60093 |
3M Dyneon™ TF 4406 PTFE, 60% Bronze Filled
(discontinued **) Type II PTFE. Applications include sliding surfaces, bearings.Data provided by Dyneon. |
|||
Electrical Resistivity | 10000 - 1.00e+17 ohm-cm | 10000 - 1.00e+17 ohm-cm | Average value: 1.28e+16 ohm-cm Grade Count:45 |
Overview of materials for Polyphenylene Sulfide (PPS), Mineral/Glass-Fiber Filled This property data is a summary of similar materials in the MatWeb database for the category "Polyphenylene Sulfide (PPS), Mineral/Glass-Fiber Filled". Each property range of values reported is mini.. |
|||
Electrical Resistivity | 10000 - 1.00e+15 ohm-cm | 10000 - 1.00e+15 ohm-cm | Average value: 2.14e+14 ohm-cm Grade Count:10 |
Overview of materials for Nylon 12, 20% Glass Fiber Filled This property data is a summary of similar materials in the MatWeb database for the category "Nylon 12, 20% Glass Fiber Filled". Specific grades with glass content between 15% and 24% are included. .. |
|||
Electrical Resistivity | 10000 ohm-cm | 10000 ohm-cm | Average |
Shakespeare Sanstat® CN125 .28mm Nylon 66 Monofilament Sanstat CN125 nylon 6,6 monofilaments have electrically conductive carbon suffused into the surface. The filaments have a carbon coating thickness of approximately 1 micron.Information provided by .. |
|||
Electrical Resistivity | <= 10000 ohm-cm | <= 10000 ohm-cm | |
Shakespeare Sanstat® CN125 .41mm Nylon 66 Monofilament Sanstat CN125 nylon 6,6 monofilaments have electrically conductive carbon suffused into the surface. The filaments have a carbon coating thickness of approximately 1 micron.Information provided by .. |
|||
Electrical Resistivity | 10000 ohm-cm | 10000 ohm-cm | Specific Resistance |
UBE Tyranno Grade C Ceramic Semi-Conductive Fiber Description: Tyranno Fiber is the continuous ceramic fiber consisting of Si, Ti or Zr,C and O. Advanced composites reinforced by the Tyranno Fiber are expected to play a very important role in the e.. |
|||
Electrical Resistivity | 10000 ohm-cm | 10000 ohm-cm | |
Arkema Group Rilsan® BMN Y BZ TL Nylon 11, Bronze Bead Filled (Conditioned) Designation ISO 1874-PA11,MHLS,16-020,(Z+M)(B+D)(80BZ+05)Rigid grade with bronze beads (85%) and molybdenum fillers for injection molding. Available color: steel brown. Light and heat stabilized.No .. |
|||
Electrical Resistivity | 10000 - 1.00e+20 ohm-cm | 10000 - 1.00e+20 ohm-cm | Average value: 5.21e+18 ohm-cm Grade Count:20 |
Overview of materials for High Density Polyethylene (HDPE), Extruded This property data is a summary of similar materials in the MatWeb database for the category "High Density Polyethylene (HDPE), Extruded". Each property range of values reported is minimum and maxim.. |
|||
Electrical Resistivity | 10000 ohm-cm | 10000 ohm-cm | ASTM D257 |
Solvay Specialty Polymers Algoflon® 25CAR PTFE; Petroleum Coke and Graphite
(discontinued **) Data provided by the manufacturer.25 wt.% Petroleum Coke and Graphite. Suspension polymer powder grade recommended for compression molding. Pure PTFE possesses high inertness, excellent dielectric p.. |
|||
Electrical Resistivity | 10000 ohm-cm | 10000 ohm-cm | |
Arkema Group Kynar® 6000 HDC N 119 PVDF
(discontinued **) Designation ISO 12086-PVDF-E,GG1Z,Q.6E5.J.A.I.D, CD,Kynar PVDF are fluorinated thermoplastic homopolymers.Outstanding characteristics of Kynar: chemical resistance, imperviousness to UV, high barrie.. |
|||
Electrical Resistivity | 10000 ohm-cm | 10000 ohm-cm | IEC 60093 |
3M Dyneon™ TFM™ 4220 Modified PTFE, 2% Cond. Pigm. Filled
(discontinued **) Applications include antistat linings, seals, gaskets, moldings.Data provided by Dyneon. |
|||
Electrical Resistivity | 10000 - 8.00e+15 ohm-cm | 10000 - 8.00e+15 ohm-cm | Average value: 4.20e+14 ohm-cm Grade Count:56 |
Overview of materials for Nylon 46, Glass Fiber Reinforced This property data is a summary of similar materials in the MatWeb database for the category "Nylon 46, Glass Fiber Reinforced". Each property range of values reported is minimum and maximum values .. |
|||
Electrical Resistivity | 10000 ohm-cm - 1e+05 | 10000 ohm-cm - 1e+05 | ASTM D257 |
PolyOne Edgetek® ES-06CF-09GF/000 RED Polyethersulfone - 6% Carbon - 9% Glass Fiber Reinforced - ESD Applications
& Data provided by PolyOne. |
|||
Electrical Resistivity | 10000 - 2.00e+14 ohm-cm | 10000 - 2.00e+14 ohm-cm | Average value: 5.91e+13 ohm-cm Grade Count:30 |
Overview of materials for Acetal Copolymer, Impact Modified This property data is a summary of similar materials in the MatWeb database for the category "Acetal Copolymer, Impact Modified". Each property range of values reported is minimum and maximum values.. |