Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Polymer Property : Cure Time = 300 min Product List

Processing Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.
Processing Properties Metric English Comments
Cure Time 300 min
5.00 hour
work life
Parker Chomerics CHO-SHIELD® 4966 Conductive Silicone Coating
Conductive Silicone Coating. This is a conductive silver-filled silicone coating. This three-component system is capable of providing 60 dB of shielding effectiveness above 30 MHz. The coating utili..
Cure Time 300 - 360 min
5.00 - 6.00 hour
5 to 6 hours to send at 77°F.
Fibre Glast 1100 Light-Weight High-Strength Patching/Filler Compound
Product Features:Very Light Weight MaterialNon-Hazardous Product - Safe to UseEasily Sanded and Carved with Shop ToolsNegligible ShrinkageNon-Critical, 2 to 1 Ratio by Weight or by VolumeExcellent N..
Cure Time >= 300 min

@Temperature 25.0 °C
>= 5.00 hour

@Temperature 77.0 °F
Lord Adhesives Aeroglaze® 9741 Epoxy Primer/Tie-Coat
Aeroglaze® 9741 is a two-part epoxy primer designed for use on aluminum, metal, and prepared composite surfaces. Aeroglaze 9741 primer/tie-coat is applied to scuff-sanded urethane top coats and e..
Cure Time >= 300 min

@Temperature 25.0 °C
>= 5.00 hour

@Temperature 77.0 °F
Lord Adhesives Aeroglaze® 9743 Epoxy Primer/Tie-Coat
Aeroglaze® 9743 is a two-part epoxy primer designed for use on aluminum, metal, and prepared composite surfaces. Aeroglaze 9743 primer/tie-coat can be applied to scuff-sanded urethane top coats a..
Cure Time >= 300 min

@Temperature 25.0 °C
>= 5.00 hour

@Temperature 77.0 °F
Lord Adhesives Aeroglaze® 9744 Epoxy Primer/Tie-Coat
Aeroglaze® 9744 is a two-part epoxy primer designed for use on aluminum, metal, and prepared composite surfaces. Aeroglaze 9744 primer/tie-coat is applied to scuff-sanded urethane top coats and e..
Cure Time 300 min
5.00 hour
Fixture time
ITW Devcon Epoxy HP 250, Straw
Information provided by ITW Devcon
Cure Time 300 min

@Temperature 23.0 °C
5.00 hour

@Temperature 73.4 °F
Shin-Etsu Silicones KE-1052D A/b Silicone, Gel RTV
Information Provided by Shin-Etsu Silicones of America, Inc.
Cure Time 300 min

@Temperature 204 °C
5.00 hour

@Temperature 400 °F
Recommended Post Cure Cycle
Arlon 51576XC15A 0.015" Uncured/Cured Silicone Rubber with Fiberglass Substrate
Design/Construction:Interleave: 3 mil PolyethyleneSide 2: Uncured Silicone RubberSubstrate: Style 7628 FiberglassSide 1: Cured Silicone RubberThis data represents typical values for the producti..
Cure Time 300 min
5.00 hour
Tack-Free Time
3M AC-251 Black Class B-1 Aerospace Sealant
3M Aerospace Sealant AC-251 Black Class B are two-part, quick curing, polysulfide based canopy and windshield sealants. These products are formulated for sealing acrylic, glass, and polycarbonate ai..
Cure Time 300 min
5.00 hour
Tack-Free Time
3M AC-350 Class A-1 Aerospace Sealant
3M Aerospace Sealant AC-350 Class A are fast-cure, intermediate density two-component, manganese dioxide cure, brushable, polysulfide fuel tank and fuselage sealants. 3M AC-350 Class A Sealants have..
Cure Time 300 - 360 min
5.00 - 6.00 hour
3M AC-770 Class B-1 Aerospace Sealant
3M Aerospace Sealant AC-770 Class B are fast cure, low density two-component, manganese dioxide cure, polysulfide fuselage sealants. 3M AC-770 Class B Sealants have outstanding resistance to aviatio..
Cure Time 300 - 360 min
5.00 - 6.00 hour
Full Hardness
3M Scotchkote™ 165CS Urethane Sealer
Scotchkote Urethane Sealer 165CS has been specifically developed as a low viscosity primer/sealer for concrete and cementitious surfaces prior to application of other Scotchkote urethane systems.Pro..
Cure Time 300 min
5.00 hour
Full Mechanical
3M Scotchkote™ FG 512 Epoxy Ceramic Surfacer
Scotchkote Epoxy Ceramic Surfacer FG 512 has been specifically developed as a ceramic enhanced epoxy repair coating for resurfacing and reforming metal machinery and equipment, such as pumps, impell..
Cure Time 300 min
5.00 hour
2 hrs at 200°F; 3 hrs at 250°F
Aremco Ceramacast™ 584 High Temperature Potting & Casting Material Magnesia
Two-part, quick-set ceramic for small parts.
Cure Time 300 - 420 min
5.00 - 7.00 hour
2-4 hrs at 200°F; 3 hrs at 250°F
Aremco Ceramacast™ 586 High Temperature Potting & Casting Material Zirconia Silicate
Castable ceramic for ceramic and metal assemblies. Excellent handling, fast curing.
Cure Time 300 - 420 min
5.00 - 7.00 hour
2-4 hrs at 200°F; 3 hrs at 250°F
Aremco Ceramacast™ 646-N High Temperature Potting & Casting Material Zirconia
Castable ceramic with high dielectric and physical strength.
Cure Time 300 - 420 min
5.00 - 7.00 hour
2-4 hrs at 200°F; 3 hrs at 250°F
Aremco Ceramacast™ 673-N High Temperature Potting & Casting Material Silicon Carbide
Single-part castable ceramic exhibiting high strength and thermal conductivity.
Cure Time 300 - 420 min
5.00 - 7.00 hour
2-4 hrs at 200°F; 3 hrs at 250°F
Aremco Ceramacast™ 675 High Temperature Potting & Casting Material Aluminum Nitride
Fine grain aluminum nitride castable with high thermal conductivity
Cure Time 300 - 420 min
5.00 - 7.00 hour
2-4 hrs at 200°F; 3 hrs at 250°F
Aremco Ceramacast™ 675-N High Temperature Potting & Casting Material Aluminum Nitride
Fine grain aluminum nitride castable with high thermal conductivity.
Cure Time 300 - 420 min
5.00 - 7.00 hour
2-4 hrs at 200°F; 3 hrs at 250°F
Aremco Ceramacast™ 895 High Temperature Potting & Casting Material Alumina
Fine grain castable ceramic.
Cure Time 300 - 420 min
5.00 - 7.00 hour
2-4 hrs at 200°F; 3 hrs at 250°F
Aremco Ceramacast™ 900 High Temperature Potting & Casting Material Zirconia Silicate
High Density, high strength molding compound.
Cure Time 300 min
5.00 hour
Time to Handling Strength
3M Scotch-Weld™ LSB60 Toughened Epoxy Adhesives
3M™ Scotch-Weld™ Toughened Epoxy Adhesive LBS60 is a high performance, two-part, toughened epoxy adhesives offering outstanding shear adhesion and very high levels of durability with a choice of f..
Cure Time 300 min
5.00 hour
Time to Handling Strength
3M Scotch-Weld™ LSB60NS Toughened Epoxy Adhesives
3M™ Scotch-Weld™ Toughened Epoxy Adhesive LBS60NS is a high performance, two-part, toughened epoxy adhesives offering outstanding shear adhesion and very high levels of durability with a choice of..
Cure Time 300 - 420 min
5.00 - 7.00 hour
2-4 hrs Air Set; 3 hrs at 200°F
Aremco Pyro-Putty™ 2500 High Temperature Ceramic-Metallic Putty, Iron Oxide Filled
Ceramic and Black Iron Oxide-Filled, One-Part, Water Based Paste.For Applications to 1/4" Thick.Repairs Cast Iron, and Steel Parts to 1600°F
Copyright © lookpolymers.com All Rights Reserved