Processing Properties | Metric | English | Comments |
---|---|---|---|
Cure Time | 60.0 min | 1.00 hour | On steel (Fixture) |
ND Industries 560 Shaft & Bearing Retainer Retaining Compound High Temperature retainer for bushings and sleeves. Retains rotors to shaftsMeets military spec Mil-R-46082B Type II |
|||
Cure Time | 60.0 min @Temperature 25.0 °C |
1.00 hour @Temperature 77.0 °F |
|
Protective Coating PC-Rot Terminator® Epoxy Wood Consolidant Description: PC-Rot Terminator® is designed to strengthen decayed or rotted wood. The mixture is a low viscosity liquid that penetrates porous surfaces filling and sealing voids with an epoxy that .. |
|||
Cure Time | 60.0 - 180 min | 1.00 - 3.00 hour | Functional |
Palm Labs Adhesives TURBO-LOCK SERIES 13 Anaerobic Thread Locking Compound TURBO-LOCK 13 SERIES is a RED, high temperature, high strength, permanent, anaerobic thread-locking compound. It is highly resistance to heat, vibrations, water, gases, oils, hydrocarbons and many c.. |
|||
Cure Time | 60.0 min @Temperature 152 °C |
1.00 hour @Temperature 305 °F |
|
TSE Industries Millathane® 5004 Millable Polyurethane Elastomer with 0 PHR Tricresyl Phosphate MILLATHANE 5004 is a millable polyurethane elastomer having excellent processing characteristics. MILLATHANE 5004 stocks can be readily processed on conventional rubber equipment. Vulcanization is c.. |
|||
Cure Time | 60.0 min @Temperature 142 °C |
1.00 hour @Temperature 287 °F |
|
TSE Industries Millathane® CM Millable Polyether Urethane Rubber with 120 PHR N339 Filler MILLATHANE CM is a sulfur and peroxide curable polyether urethane rubber. Its outstanding property is its great resistance to abrasion, which makes it of special interest for articles that are subje.. |
|||
Cure Time | 60.0 - 120 min | 1.00 - 2.00 hour | Hand Dry |
Industrial Nanotech Nansulateâ„¢ GP Translucent Insulation Coating Liquid insulation and corrosion protection incorporating Hydro-NM-Oxide, a product of nanotechnology. This grade is for general purpose insulation.NANSULATEâ„¢ liquid applied insulation is a prem.. |
|||
Cure Time | 60.0 min | 1.00 hour | |
Lord Adhesives 202 Semi-Flexible, Fast Cure, Medium Viscosity Acrylic Adhesive Lord 200 SeriesLord 200 Series Acrylic Adhesives bond minimally prepared or unprepared surfaces. They offer excellent adhesion to unprepared metals, ceramic magnets and plastics. Viscosities range f.. |
|||
Cure Time | 60.0 min @Temperature 177 °C |
1.00 hour @Temperature 351 °F |
|
Henkel Hysol PL 780-1 Film Adhesive Nonmetallic, toughened, modified epoxy film designed for bonding metal, composite and thermoplastic structures. High shear properties at 350°F / 177°C. Excellent hot-wet properties. High flow .. |
|||
Cure Time | 60.0 - 120 min @Temperature 76.7 °C |
1.00 - 2.00 hour @Temperature 170 °F |
plus 2-3 hrs at 300°F |
Master Bond EP30-3LO Highly versatile, two part epoxy system for bonding, coating, sealing and casting Master Bond EP30-3LO is a two component epoxy system featuring a combination of optical clarity and light transmission, good glass transition temperature (Tg), great chemical resistance along with p.. |
|||
Cure Time | 60.0 min @Temperature 142 °C |
1.00 hour @Temperature 287 °F |
|
TSE Industries Millathane® CM Millable Polyether Urethane Rubber, 20 Minutes Milling MILLATHANE CM is a sulfur and peroxide curable polyether urethane rubber. Its outstanding property is its great resistance to abrasion, which makes it of special interest for articles that are subje.. |
|||
Cure Time | 60.0 min @Temperature 95.0 °C |
1.00 hour @Temperature 203 °F |
|
Tra-Con Tra-Bond 957-1R Polyurethane Adhesive TRA-BOND 957-1R is a polyurethane compound used on stress sensitive components and encapsulation applications. Information provided by Tra-Con Inc. |
|||
Cure Time | 60.0 min @Temperature 152 °C |
1.00 hour @Temperature 305 °F |
|
TSE Industries Millathane® 5004 Millable Polyurethane Elastomer with 3 PHR Varox DBPH-50 MILLATHANE 5004 is a millable polyurethane elastomer having excellent processing characteristics. MILLATHANE 5004 stocks can be readily processed on conventional rubber equipment. Vulcanization is c.. |
|||
Cure Time | 60.0 min @Temperature 142 °C |
1.00 hour @Temperature 287 °F |
|
TSE Industries Millathane® CM Millable Polyether Urethane Rubber with 30 PHR N990 Filler MILLATHANE CM is a sulfur and peroxide curable polyether urethane rubber. Its outstanding property is its great resistance to abrasion, which makes it of special interest for articles that are subje.. |
|||
Cure Time | 60.0 min @Temperature 142 °C |
1.00 hour @Temperature 287 °F |
|
TSE Industries Millathane® CM Millable Polyether Urethane Rubber with 90 PHR N990 Filler MILLATHANE CM is a sulfur and peroxide curable polyether urethane rubber. Its outstanding property is its great resistance to abrasion, which makes it of special interest for articles that are subje.. |
|||
Cure Time | 60.0 min @Temperature 150 °C |
1.00 hour @Temperature 302 °F |
Minimum |
Epoxy Technology EPO-TEK® H81A Epoxy Material Description: A two component, gold-filled, electrically and thermally conductive epoxy designed for hybrid microelectronic and semiconductor packaging.Information Provided by Epoxy Technolo.. |
|||
Cure Time | 60.0 min | 1.00 hour | Initial Set |
3M Scotchkote™ EG 503 Epoxy Metal Repair Scotchkote Epoxy Metal Repair EG 503 is a specifically developed high performance metal compound that provides good mechanical strength combined with easy machining properties.Product Features:Combi.. |
|||
Cure Time | 60.0 min @Temperature 93.3 °C |
1.00 hour @Temperature 200 °F |
500°F at 1 hr, 700°F at 1 hr |
Aremco Ceramabind™ 542 High Temperature Inorganic Binder Single part, low viscosity, water-dispersed, aluminum phosphate solution for penetrating ultra fine thermal spray applications to 3000°F (1650°C). |
|||
Cure Time | >= 60.0 min | >= 1.00 hour | Air Set prior to curing |
Aremco Corr-Paint™ CP3015-WH High Temperature Protective Coating Inorganic, Mixed Oxides Filled These inorganic-ceramic, aqueous-based coatings provide outstanding resistance to thermal shock, oxidation and chemical corrosion in 1500°F. White-ceramic inorganic coating to 1500°F. |
|||
Cure Time | 60.0 - 120 min @Temperature 24.0 °C |
1.00 - 2.00 hour @Temperature 75.2 °F |
demold time |
BCC Products Kwik Kast BC 8002 Urethane Casting Kwik Kast II is an enhanced fast cast polyurethane tooling system. It has been reinvented for greater moisture resistance and improved filler suspension for easier premixing of the components. Kwik.. |
|||
Cure Time | 60.0 - 240 min @Temperature 93.3 °C |
1.00 - 4.00 hour @Temperature 200 °F |
preceeded by 1 hour air set |
Aremco Ceramabond™ 668 High Temperature Ceramic Adhesive/Paste, Alumino-Silica Filled Aremco's ceramic adhesives are easy to use, one- and two-component systems which air dry in 1-2 hrs and are ready for use following a 200 to 700 °F cure. These materials are mostly water-based and.. |
|||
Cure Time | 60.0 min @Temperature 142 °C |
1.00 hour @Temperature 287 °F |
|
TSE Industries Millathane® CM Millable Polyether Urethane Rubber with 90 PHR N339 Filler MILLATHANE CM is a sulfur and peroxide curable polyether urethane rubber. Its outstanding property is its great resistance to abrasion, which makes it of special interest for articles that are subje.. |
|||
Cure Time | 60.0 min @Temperature 142 °C |
1.00 hour @Temperature 287 °F |
|
TSE Industries Millathane® CM Millable Polyether Urethane Rubber, No Milling Time MILLATHANE CM is a sulfur and peroxide curable polyether urethane rubber. Its outstanding property is its great resistance to abrasion, which makes it of special interest for articles that are subje.. |
|||
Cure Time | 60.0 min @Pressure 0.0689 MPa, Temperature 177 °C |
1.00 hour @Pressure 10.0 psi, Temperature 351 °F |
|
3M Scotch-Weld™ 1386 One-Part Epoxy Adhesives and Metal Primer High Temperature strength and Impact resistanceInformation provided by 3M |
|||
Cure Time | 60.0 min @Temperature 142 °C |
1.00 hour @Temperature 287 °F |
|
TSE Industries Millathane® CM Millable Polyether Urethane Rubber with 75 PHR N650 Filler MILLATHANE CM is a sulfur and peroxide curable polyether urethane rubber. Its outstanding property is its great resistance to abrasion, which makes it of special interest for articles that are subje.. |
|||
Cure Time | 60.0 min @Temperature 121 °C |
1.00 hour @Temperature 250 °F |
|
Henkel SynSpand 9899 Expanding Syntactic Film Very high expansion, closed cell expanding film designed for use as shop floor aid in closed mold processes. |