Processing Properties | Metric | English | Comments |
---|---|---|---|
Back Pressure | 1.00 - 1.50 MPa | 145 - 218 psi | |
Polykemi AB POLYabs N30 ABS Information provided by Polykemi AB |
|||
Back Pressure | 1.00 - 1.50 MPa | 145 - 218 psi | |
Polykemi AB POLYabs S00 GK10 ABS, High Flow Information provided by Polykemi AB |
|||
Back Pressure | 1.00 - 1.50 MPa | 145 - 218 psi | |
Polykemi AB POLYabs V0E ABS, Flame Retardant Information provided by Polykemi AB |
|||
Back Pressure | 1.00 - 1.50 MPa | 145 - 218 psi | |
Polykemi AB POLYabs V0X ABS, Flame Retardant Information provided by Polykemi AB |
|||
Back Pressure | 1.00 - 1.50 MPa | 145 - 218 psi | |
Polykemi AB POLYasa 2410F High Flow ASA Information provided by Polykemi AB |
|||
Back Pressure | 1.00 - 1.50 MPa | 145 - 218 psi | |
Polykemi AB POLYasa 3010F Extra High Flow ASA Information provided by Polykemi AB |
|||
Back Pressure | 0.500 - 1.50 MPa | 72.5 - 218 psi | |
Polykemi AB POLYblend 45FS GF20 PC/ABS-Blend, Glass Fiber reinforced Information provided by Polykemi AB |
|||
Back Pressure | 0.500 - 1.50 MPa | 72.5 - 218 psi | |
Polykemi AB POLYblend 45FS GK25 PC/ABS-Blend, Glass Fiber reinforced Information provided by Polykemi AB |
|||
Back Pressure | 0.500 - 1.50 MPa | 72.5 - 218 psi | |
Polykemi AB POLYblend 65FS LB PC/ABS-Blend Information provided by Polykemi AB |
|||
Back Pressure | 0.500 - 1.50 MPa | 72.5 - 218 psi | |
Polykemi AB POLYblend 65H MA5 PC/ABS-blend, Low Friction Information provided by Polykemi AB |
|||
Back Pressure | 0.500 - 1.50 MPa | 72.5 - 218 psi | |
Polykemi AB POLYblend 85FS GF10 PC/ABS-Blend, Glass Fiber reinforced Information provided by Polykemi AB |
|||
Back Pressure | 0.500 - 1.50 MPa | 72.5 - 218 psi | |
Polykemi AB POLYblend 85FS GF20 PC/ABS-Blend, Glass Fiber reinforced Information provided by Polykemi AB |
|||
Back Pressure | 0.500 - 1.50 MPa | 72.5 - 218 psi | |
Polykemi AB POLYblend C65F PC/ABS-blend Information provided by Polykemi AB |
|||
Back Pressure | 0.500 - 1.50 MPa | 72.5 - 218 psi | |
Polykemi AB POLYelast TPE EZ506X Thermoplastic Elastomer, SEBS-based Information provided by Polykemi AB |
|||
Back Pressure | 0.500 - 1.50 MPa | 72.5 - 218 psi | |
Polykemi AB POLYelast TPE Z400 Thermoplastic Elastomer, SEBS-based Information provided by Polykemi AB |
|||
Back Pressure | 0.500 - 1.50 MPa | 72.5 - 218 psi | |
Polykemi AB POLYelast TPE Z506 Thermoplastic Elastomer, SEBS-based Information provided by Polykemi AB |
|||
Back Pressure | 0.500 - 1.50 MPa | 72.5 - 218 psi | |
Polykemi AB POLYelast TPE Z700 Thermoplastic Elastomer, SEBS-based Information provided by Polykemi AB |
|||
Back Pressure | 0.500 - 1.50 MPa | 72.5 - 218 psi | |
Polykemi AB POLYelast TPE Z800 Thermoplastic Elastomer, SEBS-based Information provided by Polykemi AB |
|||
Back Pressure | 0.500 - 1.50 MPa | 72.5 - 218 psi | |
Polykemi AB POLYelast TPE ZS2606 Thermoplastic Elastomer, SEBS/SBS-based Information provided by Polykemi AB |
|||
Back Pressure | 0.500 - 1.50 MPa | 72.5 - 218 psi | |
Polykemi AB POLYfill PP CIP1001F Polypropylene Information provided by Polykemi AB |
|||
Back Pressure | 0.500 - 1.50 MPa | 72.5 - 218 psi | |
Polykemi AB POLYfill PP CIP16020FCS Polypropylene, Fast Cycle Information provided by Polykemi AB |
|||
Back Pressure | 1.00 - 1.50 MPa | 145 - 218 psi | |
Polykemi AB POLYfill PP CQX8025 R2 Polypropylene, Mineral Reinforced, Scratch Resistant Information provided by Polykemi AB |
|||
Back Pressure | 1.00 - 1.50 MPa | 145 - 218 psi | |
Polykemi AB POLYabs F00 GF15 ABS, Glass Fiber-Reinforced Information provided by Polykemi AB |
|||
Back Pressure | 1.00 - 1.50 MPa | 145 - 218 psi | |
Polykemi AB POLYabs N00 ABS Information provided by Polykemi AB |
|||
Back Pressure | 0.500 - 1.50 MPa | 72.5 - 218 psi | |
Polykemi AB POLYelast TPE Z606 Thermoplastic Elastomer, SEBS-based Information provided by Polykemi AB |
|||
Back Pressure | 0.500 - 1.50 MPa | 72.5 - 218 psi | |
Polykemi AB POLYelast TPE ZS706 Thermoplastic Elastomer, SEBS/SBS-based Information provided by Polykemi AB |
|||
Back Pressure | 0.500 - 1.50 MPa | 72.5 - 218 psi | |
Akro-Plastic Akroloy® PA GF 30 (2718) PA 6.6 & PA6I/6T Dry, 30% Glass Filled One of the most characteristic properties of polyamide (PA 6.6) is the absorption of moisture. This essentially leads to increased toughness and elongation at break, to name the most important param.. |
|||
Back Pressure | 1.00 - 1.50 MPa | 145 - 218 psi | |
Polykemi AB POLYabs F20 GF17 ABS, Glass Fiber Reinforced Information provided by Polykemi AB |
|||
Back Pressure | 1.00 - 1.50 MPa | 145 - 218 psi | |
Polykemi AB POLYabs H00 ABS, Heat Resistant Information provided by Polykemi AB |
|||
Back Pressure | 0.500 - 1.50 MPa | 72.5 - 218 psi | |
Polykemi AB POLYelast TPE ZS606 Thermoplastic Elastomer, SEBS/SBS-based Information provided by Polykemi AB |