Processing Properties | Metric | English | Comments |
---|---|---|---|
Cure Time | 240 min @Temperature 65.0 °C |
4.00 hour @Temperature 149 °F |
|
NextGen Adhesives G907-28 Potting Adhesive Description: NGAC G907-28 is a medium viscosity adhesive system formulated with a spherical glass filler to provide light weight and low shrinkage performance.Advantages and Applications: The NGAC G.. |
|||
Cure Time | 240 - 300 min @Temperature 23.9 °C |
4.00 - 5.00 hour @Temperature 75.0 °F |
|
Master Bond EP21TDC-4ND Two component, highly flexibilized epoxy for bonding, sealing and coating Product Description: Master Bond EP21TDC-4ND is a two component, very flexible epoxy system for high performance bonding, sealing and coating with a non-drip consistency. It has a one to four mix ra.. |
|||
Cure Time | 240 - 360 min @Temperature 60.0 - 70.0 °C |
4.00 - 6.00 hour @Temperature 140 - 158 °F |
|
Master Bond EP62-1Med USP Class VI Two Component Epoxy Resin System Master Bond EP62-1Med is a two component epoxy system that has an exceptionally long working life at ambient temperatures and cures rapidly at moderately elevated temperatures. It has a 100 to 10 mi.. |
|||
Cure Time | 240 min @Temperature 65.0 °C |
4.00 hour @Temperature 149 °F |
|
Tra-Con Tra-Bond 1137 Epoxy Microballoon Repair Adhesive TRA-BOND 1137 is a sag resistant syntactic-foam formulation developed for aerospace honeycomb, fillet, edge-fill, contour repair, bonding, potting and casting applications where a light-weight, low .. |
|||
Cure Time | 240 min @Temperature 25.0 °C |
4.00 hour @Temperature 77.0 °F |
|
Tra-Con Tra-Bond 224-1 Rapid Room Temperature Cure Epoxy Adhesive TRA-BOND 224-1 room temperature curing epoxy adhesive develops structural strength rapidly. Unlike most "rapid cure" epoxies which gel in one or two minutes, TRA-BOND 224-1 adhesive exhibits a 30 mi.. |
|||
Cure Time | 240 min @Temperature 75.0 °C |
4.00 hour @Temperature 167 °F |
|
Tra-Con Tra-Bond 342-3.5 Room Temperature Cure Epoxy Adhesive TRA-BOND 342-3.5 room temperature curing epoxy adhesive is designed for applications which require outstanding thermal shock properties. This adhesive may be used to bond semi-porous materials such .. |
|||
Cure Time | 240 min @Temperature 104.4 °C |
4.00 hour @Temperature 219.9 °F |
|
Zyvex Performance Materials Arovex™ 250 Carbon Nanotube Strengthened Prepreg Arovex® 250 Prepreg is a 180°F (82°C) to 280°F (138°C) curing carbon nanotube strengthened epoxy prepreg suitable for numerous composites applications. Normal curing takes place at 250°F (121°.. |
|||
Cure Time | 240 min @Temperature 75.0 °C |
4.00 hour @Temperature 167 °F |
|
Tra-Con Tra-Bond GA47-2LV Instrument Adhesive TRA-BOND GA47-2LV low viscosity adhesive is designed for guidance instrument applications. This adhesive exhibits excellent compatibility with conventional gyro flotation fluids. TRA-BOND GA47-2LV a.. |
|||
Cure Time | 240 min @Temperature 65.0 °C |
4.00 hour @Temperature 149 °F |
|
Tra-Con Tra-Cast 3135 Low Viscosity Encapsulant TRA-CAST 3135 is a low viscosity adhesive developed for demanding electronic underfill and encapsulant adhesive applications. This solvent free material is readily mixed, and cured at room temperatu.. |
|||
Cure Time | 240 - 360 min @Temperature 25.0 °C |
4.00 - 6.00 hour @Temperature 77.0 °F |
|
Tra-Con Tra-Bond 2106T Fast Cure Thixotropic Epoxy Adhesive TRA-BOND 2106T is an exceptional epoxy formulation recommended for lower temperature or wet industrial bonding applications where FAST CURING is required. This versatile two-part epoxy system contai.. |
|||
Cure Time | 240 min @Temperature 65.0 °C |
4.00 hour @Temperature 149 °F |
|
Tra-Con Tra-Bond 2129 Clear Low Viscosity Epoxy Adhesive TRA-BOND 2129 is a low viscosity epoxy adhesive recommended for industrial and electronic production, repair, small casting, coating, tooling, and rigid laminating applications where a clear system .. |
|||
Cure Time | 240 min @Temperature 65.0 °C |
4.00 hour @Temperature 149 °F |
|
Tra-Con Tra-Bond 216E02 Encapsulant for "Fill" Applications TRA-BOND 216E02 is a two-part epoxy adhesive developed specifically for underfill and encapsulating applications where the combination of excellent mechanical, thermal and electrical properties are .. |
|||
Cure Time | 240 min @Temperature 75.0 °C |
4.00 hour @Temperature 167 °F |
|
Tra-Con Tra-Bond 293-21 General Purpose Epoxy Adhesive TRA-BOND 293-21 general purpose epoxy adhesive is designed to provide strong, resilient bonds to a variety of difficult-to-bond substrates, such as gold, nickel, silver, copper, and brass. The 293 s.. |
|||
Cure Time | 240 min @Temperature 25.0 °C |
4.00 hour @Temperature 77.0 °F |
Tack Free |
Chesterton ARC I BX1 Impact & Wear Resistant Epoxy Composite Description: An advanced grade epoxy and urethane composite for the repair and protection of all metal surfaces subjected to severe abrasion and impact. It is normally applied at a thickness of 6 mm.. |
|||
Cure Time | 240 min @Temperature 25.0 °C |
4.00 hour @Temperature 77.0 °F |
Tack Free |
Chesterton ARC MXHT High temperature severe wear compound Description: An advanced ceramic composite for the protection of all metal surfaces subjected to severe erosion, abrasion and chemical attack at elevated temperatures. It is applied at a thickness o.. |
|||
Cure Time | 240 min @Temperature 10.0 °C |
4.00 hour @Temperature 50.0 °F |
Foot Traffic |
Chesterton ARC NVE SYSTEM Vinyl Ester Lining Description: ARC NVE is a high performance, quartz reinforced, three-component, modified novolac vinyl ester lining capable of being applied to horizontal and vertical surfaces. The NVE system kit i.. |
|||
Cure Time | 240 min @Temperature 16.0 °C |
4.00 hour @Temperature 60.8 °F |
Tack Free |
Chesterton ARC SD4i High temperature ceramic reinforced erosion resistant coating Description: An advanced ceramic composite for resurfacing and protection of metal surfaces in immersion service. It is normally applied in a thickness range of 250-370 microns (10-15 mils) per coat.. |
|||
Cure Time | 240 - 300 min @Temperature 25.0 °C |
4.00 - 5.00 hour @Temperature 77.0 °F |
tack free |
Cytec Conathane® CC-1155-35 (Conap) Polyurethane Two-component Dielectric Conformal Coating Dielectric Conformal Coatings for ElectronicsCytec dielectric conformal coatings are the most widely used conformal coatings in industry today for such divergent applications as aircraft avionics, i.. |
|||
Cure Time | 240 min @Temperature 25.0 °C |
4.00 hour @Temperature 77.0 °F |
Overcoat Begin |
Chesterton ARC HT-S High Temperature Corrosion Resistant Coating Description: ARC HT-S is a high temperature corrosion resistant coating for continuous operating conditions at elevated temperatures. It is easily applied by brush or roller and can be sprayed with .. |
|||
Cure Time | 240 min @Temperature 227 °C |
4.00 hour @Temperature 440 °F |
Recommended Post Cure Cycle |
Arlon 30400N085 0.085" Uncured, Unsupported Silicone Rubber on a Kodacel Carrier Design/Construction:Side 1: Uncured, Unsupported Silicone RubberSubstrate: Kodacel CarrierInterleave: 0.003" PolyethyleneThis data represents typical values for the production material and should.. |
|||
Cure Time | 240 min @Temperature 175 °C |
4.00 hour @Temperature 347 °F |
Alternate Cure |
Aremco Aremco-Bond™ 2200 High Performance Epoxide Glass Fiber- and Kevlar-Reinforced, Epoxy-Novolac; High Strength, Excellent Abrasion and Corrosion Resistance |
|||
Cure Time | 240 min @Temperature 104 °C |
4.00 hour @Temperature 220 °F |
Alternate |
Aremco Aremco-Bond™ 2315X High Temperature Epoxide Potting Compound Improved Crack Resistance & Bond Strength. High Temperature Resistance, Thermally Conductive, Low Viscosity. |
|||
Cure Time | 240 min @Temperature 65.0 °C |
4.00 hour @Temperature 149 °F |
|
Atom Adhesives AA-BOND 2113 Epoxy Adhesive AA-BOND 2113 is a clear, low viscosity epoxy adhesive system that contains no solvents, cures at room temperature, has excellent flow ability and wetting characteristics, and adheres strongly to gla.. |
|||
Cure Time | 240 min @Temperature 227 °C |
4.00 hour @Temperature 440 °F |
Recommended Postcure Cycle |
Arlon R34020W062 0.062" (1.57 mm) Uncured, Unsupported Silicone Rubber on a Kodacel Carrier Design/Construction:Side 1: Uncured, Unsupported Silicone Rubber on a Kodacel Carrier This data Represents typical values for the production material. The data should not be used to write, or in pla.. |
|||
Cure Time | 240 min @Temperature 65.0 °C |
4.00 hour @Temperature 149 °F |
|
Tra-Con Tra-Bond F114 Optically Clear, Low Viscosity Blush-Free Epoxy Adhesive TRA-BOND F114 is a clear, low viscosity, room temperature cure, epoxy system with good optical properties that contains no solvents, has excellent wicking and wetting characteristics, and adheres st.. |
|||
Cure Time | 240 min @Temperature 227 °C |
4.00 hour @Temperature 440 °F |
Recommended Post Cure Cycle |
Arlon 30850N125 0.125" Uncured, Unsupported Silicone Rubber on a Kodacel Carrier Design/Construction:Side 1: Uncured, Unsupported Silicone RubberSubstrate: Kodacel CarrierInterleave: 0.003" PolyethyleneThis data represents typical values for the production material and should.. |