Thermal Properties | Metric | English | Comments |
---|---|---|---|
Vicat Softening Point | 155 °C @Load 1.02 kg |
311 °F @Load 2.25 lb |
ISO 527-2 |
Borealis Borcom™ WG140AI Polypropylene Borcom™ WG140AI is a polypropylene microcomposite intended for injection molding. This material has an excellent balance between impact strength and stiffness, high melt flow rate and gives a good.. |
|||
Vicat Softening Point | 155 °C @Load 1.02 kg |
311 °F @Load 2.25 lb |
ISO 306 |
Borealis MG302Al Polypropylene Compound, Mineral Filled MG302AI is a 30% mineral filled polypropylene compound intended for injection and back injection molding. This material has an excellent balance between impact strength and stiffness and high melt .. |
|||
Vicat Softening Point | 155 °C @Load 1.02 kg |
311 °F @Load 2.25 lb |
ISO 306 |
Borealis PS65C40 Polypropylene Compound, Mineral Filled PS65C40 is a 40% mineral filled polypropylene compound intended for injection molding. This material has an excellent balance between impact strength and stiffness, gives a good surface quality and.. |
|||
Vicat Softening Point | 155 °C @Load 0.999 kg |
311 °F @Load 2.20 lb |
120°C/min; ASTM D1525/A, ISO 306/A |
EPICHEM Epilon G2-PC 10% GF Polycarbonate, 10% Glass Fiber Characteristics: 10% glass fibre filled, good mechanical properties |
|||
Vicat Softening Point | 155 °C @Load 0.999 kg |
311 °F @Load 2.20 lb |
120°C/min; ASTM D1525/A, ISO 306/A |
EPICHEM Epilon G4-PC 20% GF Polycarbonate, 20% Glass Fiber Characteristics: 20% glass fibre filled, excellent mechanical properties |
|||
Vicat Softening Point | 155 °C @Load 1.00 kg |
311 °F @Load 2.21 lb |
50°C/h; ISO 306 |
Polykemi AB POLYfill PPH BF405510 VT1 Polypropylene Homopolymer, Reinforced, Heat Resistant Information provided by Polykemi AB |
|||
Vicat Softening Point | 155 °C @Load 1.02 kg |
311 °F @Load 2.25 lb |
ISO 306 |
Borealis MB350WG Polypropylene Compound, Mineral Filled MB350WG is a 30% mineral filled polypropylene compound intended for injection molding. This material has a very high impact strength while maintaining good stiffness and is easy to process. Applic.. |