Thermal Properties | Metric | English | Comments |
---|---|---|---|
Maximum Service Temperature, Air | 90.0 °C | 194 °F | UL-746 ABC |
Plaskolite Optix® CA - 75 LL General Purpose Acrylic Resin OPTIX® general purpose acrylics are available in a variety of performance grades that offer varying melt flow rates, heat resistance, color/opacity and gloss levels.Information provided by Plaskoli.. |
|||
Maximum Service Temperature, Air | 90.0 °C | 194 °F | UL 746 ABC |
Plaskolite Optix® CA-75 General Purpose Acrylic Resin Injection Molding and Extrusion Grade Pellets. Highest heat resistance, medium flow. |
|||
Maximum Service Temperature, Air | 90.0 °C | 194 °F | UL-746 ABC |
Plaskolite West Optix® CA - 75 UVA General Purpose Acrylic Resin Generally unaffected by alkalis, hydrocarbons, non-oxidizing acids, and salt water. Transparent, translucent, opaque, and custom colors in various grades of melt flow rate and heat resistance are av.. |
|||
Maximum Service Temperature, Air | 90.0 °C | 194 °F | continuous |
Polikim POLITAL® Polyoxymethylene (POM) Polital® is completely resistant to solvents, petroleum products, oil and grease. It is not resistant to strong acids, bases and oxidants. As it is affected by UV rays, its use in open air is not r.. |
|||
Maximum Service Temperature, Air | 90.0 °C | 194 °F | Recommended continuous use |
Rogers Corporation Poron® 4701-40-30 Cellular Urethane Foam Information on this material is preliminary.Standard color is black (04); others are available. Passes fogging test SAE-J 1736 for 3 hrs. at 100°C (212°F).General Poron® information: Poron® fo.. |
|||
Maximum Service Temperature, Air | 90.0 °C | 194 °F | Constant use; SAE J-2236 |
Rogers Corporation Poron® 4701-41-20 Urethane Foam, Soft, Enhanced Sealability Soft, enhanced sealability material offering greater closed-cell content for demanding vacuum sealing applications or low closure-force requirements. Standard available thickness range from 0.031".. |
|||
Maximum Service Temperature, Air | 90.0 °C | 194 °F | Continuous; FRISETTA Test Method |
Nilit FRIANYL A63 M2 Nylon 6.6 for injection molding, 2% molybdenum disulphide lubricated Nylon 6.6 for injection molding.Information provided by Frisetta Polymer, which merged into Nilit Plastics |
|||
Maximum Service Temperature, Air | 90.0 °C | 194 °F | Continuous; FRISETTA Test Method |
Nilit RECONYL A KV30 Recycled nylon 6.6 for injection molding, 30% glass ball reinforced Recycled nylon 6.6 for injection molding (available only in black).Information provided by Frisetta Polymer, which merged into Nilit Plastics |
|||
Maximum Service Temperature, Air | 90.0 - 250 °C | 194 - 482 °F | Average value: 164 °C Grade Count:23 |
Overview of materials for Nylon 66/6, 40% Glass Fiber Reinforced This property data is a summary of similar materials in the MatWeb database for the category "Nylon 66/6, 40% Glass Fiber Reinforced". Specific grades with glass content between 35% and 44% are incl.. |
|||
Maximum Service Temperature, Air | 90.0 °C | 194 °F | |
Lehmann & Voss LUVOCOM® 6-8436 Polyamide 12, with PTFE, lubricant modified Applications: Automotive industry, textile- and office machinery, apparatus- and precision engineering.Dynamic stressed parts.Low waterabsorbtion.Isotropic shrinkage characteristics.Bearings, sleeve.. |
|||
Maximum Service Temperature, Air | 90.0 °C | 194 °F | Continuous |
Global EPP PA 6E Extruded Polyamide 6 Polyamides, commonly referred to as nylons, are macromolecular, partially crystalline thermoplastics. Their physical properties are mainly determined by the composition and structure of their molecu.. |
|||
Maximum Service Temperature, Air | 90.0 °C | 194 °F | Deflection Temp; Load not reported; ASTM D648 |
Lucky IF-850 Acrylic, Injection Grade Easy-flow injection molding grade. May be UV stabilized. General Lucky PMMA qualities: Transparent/elegant appearance, high heat and weather resistance, excellent chemical resistance and coloring .. |
|||
Maximum Service Temperature, Air | 90.0 °C | 194 °F | |
Lehmann & Voss LUVOCOM® 1/GF/20/TF/10/SI/2/NC Polyamide 66, with glass fiber, PTFE, lubricant modified Applications: Automotive industry, textile- and office machinery, apparatus- and precision engineering.Improved friction and wear behaviour. Emergency running property.Strong, stiff parts.Bearings, .. |
|||
Maximum Service Temperature, Air | 90.0 °C | 194 °F | |
Lehmann & Voss LUVOCOM® 100-7846 Thermoplastic polyurethane, with aramid reinforcement Applications: Improved friction and wear behaviour. Emergency running property.dynamic stressBearings, sleeves, sliding elements, chair rollers, handles.Information provided by Lehmann & Voss & Co.K.. |
|||
Maximum Service Temperature, Air | 90.0 °C | 194 °F | |
Styrolution Luran® S 778 UV Colored ASA Description: Injection molding grade with enhanced toughness and resistance to heat distortion. Especially suitable for exterior automotive components (e.g. radiator grills, rear end appliqué pan.. |
|||
Maximum Service Temperature, Air | 90.0 °C | 194 °F | |
Styrolution Novodur® HH-112 ABS Novodur HH-112 is a high heat injection molding grade. It provides good heat resistance combined with enhanced stiffness.Information provided by Styrolution |
|||
Maximum Service Temperature, Air | 90.0 - 105 °C | 194 - 221 °F | |
Sylvin Technologies 574 PVC Wire/Cable Compound Information provided by Sylvin Technologies Inc. |
|||
Maximum Service Temperature, Air | 90.0 °C | 194 °F | |
Trelleborg B800 Commercial Nitrile Rubber Nitrile rubber or acrylonitrile-butadiene rubber is a copolymer of butadiene and acrylonitrile.PropertiesGood general resistance to oils.Good mechanical properties especially tensile strength, flexi.. |
|||
Maximum Service Temperature, Air | 90.0 °C | 194 °F | |
Trelleborg Emerson & Cuming Stycast® 1365-25 Two-Component Epoxy Flexible Encapsulant Emerson & Cuming 1365-25 Stycast® Two-Component Epoxy Flexible EncapsulantFeaturesGood Chemical ResistanceUnfilledLow ViscosityMix Ratio (by weight) = 100:100 Cure Type: Room Temp or Heat Bonding T.. |
|||
Maximum Service Temperature, Air | 90.0 - 110 °C | 194 - 230 °F | long term; EMS |
EMS-Grivory Grivory® L 20 HL black 9563 PA12 Product Description: Grilamid L 20 HL black 9563 is a, medium viscosity extrusion grade, based on Polyamide 12 (PA12). Grilamid L20 HL black 9563 has been especially developed for external cable she.. |
|||
Maximum Service Temperature, Air | 90.0 - 110 °C | 194 - 230 °F | long term; EMS |
EMS-Grivory Grivory® L 25 NZ ESD PA12 Product Description: Grilamid L 25 NZ ESD is a high viscosity, anti-static extrusion grade of Polyamide 12 (PA12). Grilamid L 25 NZ ESD is impact modified and heat stabilized. The inherent color of .. |
|||
Maximum Service Temperature, Air | 90.0 - 120 °C | 194 - 248 °F | long term; EMS |
EMS-Grivory Grivory® LKN-5H PA12-GB50 Product description: Grilamid LKN-5H is a 50% glass bead reinforced, heat stabilized polyamide 12 injection molding grade with the following property profile: Very low moisture absorptionExtremely g.. |
|||
Maximum Service Temperature, Air | 90.0 - 120 °C | 194 - 248 °F | long term; EMS |
EMS-Grivory Grivory® TSC-20/4 EC black 9832 PA666-CF20 Information provided by EMS Grivory |
|||
Maximum Service Temperature, Air | 90.0 - 120 °C | 194 - 248 °F | long term; EMS |
EMS-Grivory Grivory® TSGZ-50 PA666-GF50 Information provided by EMS Grivory |
|||
Maximum Service Temperature, Air | 90.0 °C | 194 °F | |
Colorite Polymers Weatherflex™ CS1534WX (NTL01P) Wire and Cable Vinyl Compound Description: Colorite specialty wire and cable compounds feature low smoke properties, excellent flame retardance, low temperature flexibility, and resistance to abrasion and chemicals. All are avai.. |
|||
Maximum Service Temperature, Air | 90.0 - 180 °C | 194 - 356 °F | Average value: 117 °C Grade Count:6 |
Overview of materials for Nylon 6, Unreinforced, Flame Retardant This property data is a summary of similar materials in the MatWeb database for the category "Nylon 6, Unreinforced, Flame Retardant". Each property range of values reported is minimum and maximum v.. |
|||
Maximum Service Temperature, Air | 90.0 °C | 194 °F | UL-746 ABC |
Plaskolite Optix® CP - 86 UVA General Purpose Acrylic Resin OPTIX® general purpose acrylics are available in a variety of performance grades that offer varying melt flow rates, heat resistance, color/opacity and gloss levels.Information provided by Plaskoli.. |
|||
Maximum Service Temperature, Air | 90.0 °C | 194 °F | UL-746B Long Term Relative temperature Index; Mechanical w/o Impact |
Shell Carilon® D26HM100 Polyketone, General-Purpose Injection Molding Grade
(discontinued **) Shell announced in Feb. 2000 that the Carilon product line is being discontinued. CARILON Polymer D26HM100 is a general-purpose injection molding grade with mechanical properties which classify it .. |
|||
Maximum Service Temperature, Air | 90.0 - 105 °C | 194 - 221 °F | |
Sylvin Technologies 5120 PVC Wire/Cable Compound Information provided by Sylvin Technologies Inc. |