Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Polymer Property : CTE, linear = 72.0 µm/m-°C Product List

Thermal Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.
Thermal Properties Metric English Comments
CTE, linear 72.0 µm/m-°C

@Temperature -18.0 - 38.0 °C
40.0 µin/in-°F

@Temperature -0.400 - 100 °F
ASTM D696
Plaskolite Duraplex® 50% I Impact Modified Acrylic Sheet
Continuously processed acrylic sheet.Data provided by the manufacturer, Plaskolite, Inc.
CTE, linear 72.0 - 149.4 µm/m-°C

@Temperature -17.8 - 156 °C
40.0 - 83.00 µin/in-°F

@Temperature 0.000 - 312 °F
Average value: 94.9 µm/m-°C Grade Count:26
Overview of materials for Acrylic, General Purpose, Molded
This property data is a summary of similar materials in the MatWeb database for the category "Acrylic, General Purpose, Molded". Each property range of values reported is minimum and maximum values ..
CTE, linear 72.0 - 162 µm/m-°C

@Temperature 25.6 - 204 °C
40.0 - 90.0 µin/in-°F

@Temperature 78.0 - 400 °F
ASTM D696
Garlock 8764 PTFE Rubber Sheet
Premium Grade Skived PTFE SheetInformation provided by Garlock Rubber Technologies
CTE, linear 72.0 µm/m-°C

@Temperature 20.0 °C
40.0 µin/in-°F

@Temperature 68.0 °F
ASTM D696
Spartech 829 Static Conductive Control Sheet
Description: Static Control SheetInformation provided by Spartech.
CTE, linear 72.0 µm/m-°C
40.0 µin/in-°F
ASTM D 696
Styrolution PS 1611 GPPS
Injection moldingGood balance of flow, strength and set-up propertiesUL Classification 94 HBInformation provided by Styrolution
CTE, linear 72.0 µm/m-°C
40.0 µin/in-°F
ASTM D 696
Styrolution PS 1621 GPPS
Easy flow material with excellent moldabilityExcellent clarity and set-up timeInformation provided by Styrolution
CTE, linear 72.0 µm/m-°C
40.0 µin/in-°F
ASTM D 696
Styrolution PS 3100/3101 GPPS
Good balance of flow and set-up propertiesModerate heat resistanceUSP Class VI certifiedInformation provided by Styrolution
CTE, linear 72.0 - 180 µm/m-°C
40.0 - 100 µin/in-°F
TriStar Ultracomp UC-400 Composite Bearing
Ultracomp UC-400 - Designed for high loads, low speeds, impact and vibration applications. UC-400 has a MOS2 additive for salt water applications where cathodic reactions could occur. Excellent dry ..
CTE, linear 72.0 µm/m-°C

@Temperature 0.000 - 100 °C
40.0 µin/in-°F

@Temperature 32.0 - 212 °F
Evonik CYRO Acrylite Plus® H-17 M Acrylic Molding Compound
This material has been replaced by Acrylite Plus® ZK-M - same physical properties with lower haze. Data provided by CYRO IndustriesUses: auto lenses, glazing, toys
CTE, linear 72.0 µm/m-°C

@Temperature 0.000 - 100 °C
40.0 µin/in-°F

@Temperature 32.0 - 212 °F
ASTM D696
Evonik CYRO Acrylite Plus® zk4HR Impact Acrylic Polymer
CTE, linear 72.0 µm/m-°C

@Temperature 0.000 - 100 °C
40.0 µin/in-°F

@Temperature 32.0 - 212 °F
ASTM D696
Evonik CYRO Acrylite Plus® zk5BR Impact Acrylic Polymer
CTE, linear 72.0 µm/m-°C

@Temperature 0.000 - 100 °C
40.0 µin/in-°F

@Temperature 32.0 - 212 °F
ASTM D696
Evonik CYRO Acrylite Plus® zk5HF Impact Acrylic Polymer
CTE, linear 72.0 µm/m-°C

@Temperature 0.000 - 156 °C
40.0 µin/in-°F

@Temperature 32.0 - 312 °F
ASTM D696
Evonik CYRO ACRYLITE PLUS® ZK-F Impact Acrylic Polymer
ACRYLITE PLUS® ZK-F impact acrylic polymer is an amorphous, impact-modified thermoplastic molding and extrusion compound based on polymethyl methacrylate (PMMA).Typical properties of ACRYLITE PLUS®..
CTE, linear 72.0 µm/m-°C

@Temperature 0.000 - 156 °C
40.0 µin/in-°F

@Temperature 32.0 - 312 °F
ASTM D696
Evonik CYRO ACRYLITE PLUS® ZK-M Impact Acrylic Polymer
ACRYLITE PLUS® ZK-M impact acrylic polymer is an amorphous, impact-modified thermoplastic molding and extrusion compound based on polymethyl methacrylate (PMMA).Typical properties of ACRYLITE PLUS®..
CTE, linear 72.0 µm/m-°C

@Temperature 0.000 - 100 °C
40.0 µin/in-°F

@Temperature 32.0 - 212 °F
ASTM D696
Evonik CYRO Acrylite® S10/8H Compound Molding and Extrusion
Information provided by Cyro Industries
CTE, linear 72.0 µm/m-°C

@Temperature 0.000 - 100 °C
40.0 µin/in-°F

@Temperature 32.0 - 212 °F
ASTM D696
Evonik CYRO Acrylite® ZK-6 Acrylic molding and extrusion compound
ACRYLITE PLUS compounds are specially formulated to offer enhanced impact resistance, toughness and chemical resistance, without sacrificing clarity. These compounds combine maximum impact performan..
CTE, linear 72.0 µm/m-°C

@Temperature 20.0 °C
40.0 µin/in-°F

@Temperature 68.0 °F
ASTM D696
Evonik CYRO Paraglas Soundstop® Transparent Sheet
Paraglas Soundstop is a standard clear transparent sheetInformation provided by Cyro Industries
CTE, linear 72.0 µm/m-°C

@Temperature 20.0 °C
40.0 µin/in-°F

@Temperature 68.0 °F
ASTM D696
Ensinger Tecast Vekton™ 6XAU High Heat Cast Nylon 6 (PA6)
VEKTON® 6XAU is a high heat weather resistant cast nylon 6 with superior fatigue-resistant and bearing properties.General Vekton® Cast Nylon Information: VEKTON cast nylon, available in a variety ..
CTE, linear 72.0 µm/m-°C

@Temperature 20.0 °C
40.0 µin/in-°F

@Temperature 68.0 °F
ASTM D696
Ensinger Tecast™ 6PA Natural Unfilled Cast Nylon 6 (PA6)
Tecast® 6PA Natural is an FDA-compliant grade used in applications requiring cast nylon but without any fillers.General Tecast® Cast Nylon Information: Tecast cast nylon, available in a variety of..
CTE, linear 72.0 µm/m-°C
40.0 µin/in-°F
ASTM D696
Ensinger TECATRON™ PPS Polyphenylene sulfide (PPS)
TECATRON PPS is a high performance thermoplastic that combines good mechanical properties with excellent thermal and chemical resistance properties. There is no known solvent that dissolves TECATRON..
CTE, linear 72.0 µm/m-°C

@Temperature 0.000 - 100 °C
40.0 µin/in-°F

@Temperature 32.0 - 212 °F
ISO 11359-2
Evonik CYRO Acrylite® FT15 NTA Compound
CTE, linear 72.0 µm/m-°C

@Temperature 0.000 - 156 °C
40.0 µin/in-°F

@Temperature 32.0 - 312 °F
ASTM D696
Evonik CYRO ACRYLITE® H12 Acrylic Polymer
ACRYLITE® H12 acrylic polymer is an amorphous thermoplastic molding and extrusion compound based on polymethyl methacrylate (PMMA).Typical properties of ACRYLITE® acrylic polymers are excellent we..
CTE, linear 72.0 µm/m-°C

@Temperature 0.000 - 100 °C
40.0 µin/in-°F

@Temperature 32.0 - 212 °F
ASTM D696
Evonik CYRO CYROLITE GS-90 Acrylic-Based Multipolymer Compound
CYROLITE GS-90 compound is an impact-modified acrylic-based multipolymer for molding and extrusion of medical applications. Typical properties of CYROLITE compound are:excellent chemical resistance ..
CTE, linear 72.0 µm/m-°C

@Temperature 0.000 - 100 °C
40.0 µin/in-°F

@Temperature 32.0 - 212 °F
ASTM D696
Evonik CYRO CYROLITE R30 Acrylic-Based Multipolymer Compound
CTE, linear 72.0 - 90.0 µm/m-°C

@Temperature 20.0 °C
40.0 - 50.0 µin/in-°F

@Temperature 68.0 °F
ASTM D696
Ensinger Tecast Vekton™ 6PALM Premium Bearing Grade cast nylon (PA6)
Tecast 6PALM contains both solid and liquid lubricants dispersed throughout the nylon to provide consistent wear rates and coefficients of friction.Information provided by Ensinger, Inc.
CTE, linear 72.0 µm/m-°C

@Temperature 20.0 °C
40.0 µin/in-°F

@Temperature 68.0 °F
ASTM D-696
Axiall 7140 Rigid PVC, Extrusion & Molding
Georgia Gulf 7140 is a special purpose rigid PVC compound designed for applications requiring the following properties: WeatherabilityGlossImpact Strength & ToughnessFlame RetardantChemical Resista..
CTE, linear 72.0 µm/m-°C

@Temperature 20.0 °C
40.0 µin/in-°F

@Temperature 68.0 °F
ASTM D-696
Axiall 8132 Rigid PVC, Extrusion
Georgia Gulf 8132 is a rigid PVC compound designed for applications where transparency is important. This product remains unchanged except for the coded name and was previously identified as 3132. ..
CTE, linear 72.0 - 162 µm/m-°C

@Temperature 25.6 - 204 °C
40.0 - 90.0 µin/in-°F

@Temperature 78.0 - 400 °F
ASTM D696
Technetics Group Texolon™ 8764 PTFE  (Unverified Data**)
A premium PTFE sheet manufactured from the highest quality PTFE.PTFE CharacteristicsChemical ResistanceThermal StabilityCryogenic PropertiesLow Coefficient of FrictionLow Surface EnergyLow Dielectri..
CTE, linear 72.0 µm/m-°C

@Temperature 20.0 °C
40.0 µin/in-°F

@Temperature 68.0 °F
ASTM D696
Ensinger ENSIFIDE® PPS (Polyphenylene Sulfide) - Extruded Products  (discontinued **)
ENSIFIDE is a high performance thermoplastic that combines good mechanical properties with excellent thermal and chemical resistance properties. There is no known solvent that dissolves ENSIFIDE at..
CTE, linear 72.0 µm/m-°C

@Temperature 20.0 °C
40.0 µin/in-°F

@Temperature 68.0 °F
ASTM D-696
Axiall 3650 Rigid PVC, Extrusion
Georgia Gulf 3650 is a special purpose rigid PVC compound designed for applications requiring the following properties: WeatherabilityGlossImpact Strength & ToughnessFlame RetardantChemical Resistan..
Copyright © lookpolymers.com All Rights Reserved