Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Polymer Property : CTE, linear = 60.0 µm/m-°C Product List

Thermal Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.
Thermal Properties Metric English Comments
CTE, linear 40.0 - 60.0 µm/m-°C

@Temperature -30.0 - 30.0 °C
22.2 - 33.3 µin/in-°F

@Temperature -22.0 - 86.0 °F
TMA
SABIC Innovative Plastics Cycoloy® MC5210 PC+ABS (Asia Pacific)
CTE, linear 50.0 - 60.0 µm/m-°C

@Temperature 50.0 - 100 °C
27.8 - 33.3 µin/in-°F

@Temperature 122 - 212 °F
ISO 11359-2
Raschig Group 6501 DAIP
Glass-fiber reinforced diallyl isophthalate molding compound. Good mechanical strength together with retention of high electrical isolation properties under hot humid conditions, exceptional dimensi..
CTE, linear 50.0 - 60.0 µm/m-°C

@Temperature 50.0 - 100 °C
27.8 - 33.3 µin/in-°F

@Temperature 122 - 212 °F
ISO 11359-2
Raschig Group 6552 DAIP
Glass-fiber reinforced diallyl isophthalate molding compound. Good mechanical strength together with retention of high electrical isolation properties under hot humid conditions, exceptional dimensi..
CTE, linear 5.00 - 60.0 µm/m-°C

@Temperature 50.0 - 100 °C
2.78 - 33.3 µin/in-°F

@Temperature 122 - 212 °F
Average value: 31.3 µm/m-°C Grade Count:8
Overview of materials for Diallyl Phthalate (DAP) Molding Compound, Short Glass Fiber Filled
This property data is a summary of similar materials in the MatWeb database for the category "Diallyl Phthalate (DAP) Molding Compound, Short Glass Fiber Filled". Each property range of values repor..
CTE, linear 40.0 - 60.0 µm/m-°C

@Temperature -30.0 - 30.0 °C
22.2 - 33.3 µin/in-°F

@Temperature -22.0 - 86.0 °F
TMA
SABIC Innovative Plastics Lexan® SP7602 PC (Asia Pacific)
CTE, linear 30.6 - 60.0 µm/m-°C
17.0 - 33.3 µin/in-°F
Average value: 44.1 µm/m-°C Grade Count:5
Overview of materials for Nylon 66, 10% Mineral Filled
This property data is a summary of similar materials in the MatWeb database for the category "Nylon 66, 10% Mineral Filled". Specific grades with primary filler content between 5% and 14% are includ..
CTE, linear 40.0 - 60.0 µm/m-°C

@Temperature -30.0 - 30.0 °C
22.2 - 33.3 µin/in-°F

@Temperature -22.0 - 86.0 °F
TMA
SABIC Innovative Plastics LNP THERMOCOMP Lexan_SP7602 PC (Asia Pacific)
CTE, linear 40.0 - 60.0 µm/m-°C

@Temperature -30.0 - 30.0 °C
22.2 - 33.3 µin/in-°F

@Temperature -22.0 - 86.0 °F
TMA
SABIC Innovative Plastics Noryl GTX GTX870 PPE+PA6 (Asia Pacific)
This data was supplied by SABIC-IP for the Asia Pacific region.
CTE, linear 40.0 - 60.0 µm/m-°C

@Temperature -30.0 - 30.0 °C
22.2 - 33.3 µin/in-°F

@Temperature -22.0 - 86.0 °F
TMA
SABIC Innovative Plastics NORYL GTX GTX870 PPE+PA6 (Asia Pacific)
CTE, linear 40.0 - 60.0 µm/m-°C

@Temperature -30.0 - 30.0 °C
22.2 - 33.3 µin/in-°F

@Temperature -22.0 - 86.0 °F
TMA
SABIC Innovative Plastics NORYL GTX870 PPE+PA6 (Asia Pacific)
CTE, linear 55.0 - 60.0 µm/m-°C
30.6 - 33.3 µin/in-°F
Master Bond UV15LV One Component, UV Curable Epoxy Based System
Product Description: Master Bond UV15LV is a high strength, low viscosity, epoxy based UV curable system for bonding, sealing and coating. It has low viscosity and it is widely used in a variety of ..
CTE, linear 55.0 - 60.0 µm/m-°C
30.6 - 33.3 µin/in-°F
Hippe PEI
A material with very high mechanical strength and high thermoforming stability which can be used at high temperatures. Distinguished by constant dielectric properties, a wide range of frequency and ..
CTE, linear 50.0 - 60.0 µm/m-°C
27.8 - 33.3 µin/in-°F
Average value: 51.8 µm/m-°C Grade Count:11
Overview of materials for Polyphenylene Sulfide (PPS), Unreinforced, Extruded
This property data is a summary of similar materials in the MatWeb database for the category "Polyphenylene Sulfide (PPS), Unreinforced, Extruded". Each property range of values reported is minimum ..
Copyright © lookpolymers.com All Rights Reserved