Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Polymer Property : Deflection Temperature at 1.8 MPa (264 psi) = 154 °F Product List

Thermal Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.
Thermal Properties Metric English Comments
Deflection Temperature at 1.8 MPa (264 psi) 68.0 °C
154 °F
ASTM D648
Nylene® 404 Nylon 6
Injection molding grade. Dry as molded. Nylene 404 is a heat stabilized version of 401 which is recommended for general purpose nylon molding applications in both thin and heavy sections. In additi..
Deflection Temperature at 1.8 MPa (264 psi) 68.0 °C
154 °F
120°C/h; ISO 75/1
Polykemi AB POLYfill PPH T20020 Polypropylene Homopolymer, Mineral Reinforced
Information provided by Polykemi AB
Deflection Temperature at 1.8 MPa (264 psi) 68.0 °C
154 °F
ASTM D648
North Wood Plastics PS with 60% Wood Fiber
Data provided by North Wood Plastics, Inc.
Deflection Temperature at 1.8 MPa (264 psi) 67.8 °C
154 °F
ASTM D648
RheTech Products HP531-678UV 22% Talc Reinforced High Performance Polypropylene Copolymer, UV Stabilized, Medium Scratch Resistant, IT3A Medium Light Stone
Applications: I/P componentsInterior trimA/B/C/ PillarsInjection molding conditions reported in table.Information provided by RheTech Products.
Deflection Temperature at 1.8 MPa (264 psi) 68.0 °C
154 °F
ISO 75-2
Polycasa LENTICULAR PETG
Good ink adhesionGood receptabilityStable sheet dimensionsHigh impact strengthGood chemical resistanceEnvironmentally safeRecyclableMeets current food contact legislationDisplays Graphic Arts Advert..
Deflection Temperature at 1.8 MPa (264 psi) 68.0 °C
154 °F
ASTM D648
Ineos Nova 3900 General Purpose Crystal Polystyrene  (discontinued **)
High flow, Good compoundingApplications: Color concentrates, Compounding, Thin wall moldingsExposure to gamma radiation in the 2.02-6.06 megarad range has no significant effect on the physical and o..
Deflection Temperature at 1.8 MPa (264 psi) 68.0 °C
154 °F
Ineos ABS Triax® 1120 ABS + Polyamide Blend (DAM)
Key Features:UnfilledPlatableHigh impact or high impact modifiedSuitable processing methods:Injection moldingFilm extrusionBlow molding
Deflection Temperature at 1.8 MPa (264 psi) 68.0 °C

@Thickness 3.20 mm
154 °F

@Thickness 0.126 in
unannealed; ASTM D 648
SABIC Innovative Plastics LNP Lubricomp FFL21 PE (Asia Pacific)
LNP* Lubricomp* FFL21 is a compound based on Polyethylene resin containing Glass Fiber, PTFE. Added features of this material include: Internally Lubricated.This data was supplied by SABIC-IP for t..
Deflection Temperature at 1.8 MPa (264 psi) 68.0 °C
154 °F
Flatw 80*10*4 sp=64mm; ISO 75/Af
SABIC Innovative Plastics LNP LUBRICOMP ML008 PP (Europe-Africa-Middle East)
LNP* LUBRICOMP* ML008 is a compound based on Polypropylene resin containing PTFE. Added Features include: Internally Lubricated.
Deflection Temperature at 1.8 MPa (264 psi) 68.0 °C

@Thickness 3.20 mm
154 °F

@Thickness 0.126 in
unannealed; ASTM D648
SABIC Innovative Plastics LNP LUBRICOMP MX91206 PP
LNP* Lubricomp* MX91206 is a compound based on Polypropylene containing proprietary fillers. Added feature of this grade is: Wear Resistant.
Deflection Temperature at 1.8 MPa (264 psi) 68.0 °C

@Thickness 3.20 mm
154 °F

@Thickness 0.126 in
unannealed; ASTM D648
SABIC Innovative Plastics Valox® 364 PBT+PC
Designed for outdoor telecommunications enclosure applications.
Deflection Temperature at 1.8 MPa (264 psi) 68.0 °C
154 °F
80x10x4mm; ISO 75-2/Af
SYNTHOS Krasten® FB28 High Impact Polystyrene And Polyethylene Blend
Polymer blend HIPS/PE. High toughness, very good tensile properties and environmental stress cracking resistance. Processed mainly by extrusion and thermoforming. Production of sheets and films, tec..
Deflection Temperature at 1.8 MPa (264 psi) 68.0 °C
154 °F
ASTM D648
A. Schulman POLYFORT™ FPP 1453 Calcium Carbonate Filled Homopolymer Polypropylene
DescriptionPolyfort® FPP 1453 is a long term heat aging grade of 40% calcium carbonate filled homopolymer polypropylene. Information provided by A. Schulman.
Deflection Temperature at 1.8 MPa (264 psi) 68.0 °C
154 °F
ASTM D648
A. Schulman POLYFORT™ FPP 892E Extrusion and Blow Molding Grade Homopolymer Polypropylene
DescriptionPolyfort® FPP 892E is an extrusion and blow molding grade 20% mineral-filled homopolymer polypropylene.Information provided by A. Schulman.
Deflection Temperature at 1.8 MPa (264 psi) 68.0 °C
154 °F
ISO 75
Wellman Wellamid® 22L-N Unfilled Nylon 66, Lubricated
Typical Applications: Automotive components, gears, switches, bearings, pulleys, fasteners, electrical coil forms, chain-saw hand guards, cable ties, furniture hardware, small appliance housings, ae..
Deflection Temperature at 1.8 MPa (264 psi) 68.0 °C
154 °F
ASTM D648
A. Schulman POLYFORT™ FPP 1453 Calcium Carbonate Filled Homopolymer Polypropylene
DescriptionPolyfort® FPP 1453 is a long term heat aging grade of 40% calcium carbonate filled homopolymer polypropylene. Information provided by A. Schulman.
Deflection Temperature at 1.8 MPa (264 psi) 68.0 °C
154 °F
ASTM D648
A. Schulman POLYFORT™ FPP 1453 Calcium Carbonate Filled Homopolymer Polypropylene
DescriptionPolyfort® FPP 1453 is a long term heat aging grade of 40% calcium carbonate filled homopolymer polypropylene. Information provided by A. Schulman.
Deflection Temperature at 1.8 MPa (264 psi) 68.0 °C
154 °F
ASTM D648
A. Schulman POLYFORT™ FPP 1453 Calcium Carbonate Filled Homopolymer Polypropylene
DescriptionPolyfort® FPP 1453 is a long term heat aging grade of 40% calcium carbonate filled homopolymer polypropylene. Information provided by A. Schulman.
Deflection Temperature at 1.8 MPa (264 psi) 68.0 °C
154 °F
ASTM D648
A. Schulman POLYFORT™ FPP 892E Extrusion and Blow Molding Grade Homopolymer Polypropylene
DescriptionPolyfort® FPP 892E is an extrusion and blow molding grade 20% mineral-filled homopolymer polypropylene.Information provided by A. Schulman.
Deflection Temperature at 1.8 MPa (264 psi) 68.0 °C
154 °F
DIN 53461
Polyram RamOfin PPH106 Polypropylene, Injection Molding
polypropylene with molybdenum for injection molding applicationsInformation provided by Polyram Ram On Ind.
Deflection Temperature at 1.8 MPa (264 psi) 68.0 °C
154 °F
Conditioned 4 hours @ 70°C (158°F); ASTM D648
Eastman Tenite Acetate 105E1R26033 Clear, Trsp Cellulose Acetate
Plasticizer 29%. Weight loss on heating = 2.6% per ASTM D 707. Soluble matter loss = 0.4% per ASTM D 570.Product Description: TENITE cellulosic plastics are noted for their excellent balance of p..
Deflection Temperature at 1.8 MPa (264 psi) 67.8 °C
154 °F
Aclo Accutech Polypropylene Homopolymer HP0339W20L1 Wollastonite Reinforced
Deflection Temperature at 1.8 MPa (264 psi) 67.5 °C
154 °F
ISO 75-2/A
Cathay PA56 Renewable Engineering Polyamide, DAM
Cathay engineering polyamides contain 26-100% renewably sourced material. Advantages: Operates at similar conditions to PA66; Suitable for injection, compounding and extrusion; Stable mechanical pr..
Deflection Temperature at 1.8 MPa (264 psi) 68.0 °C
154 °F
ASTM D648
Ashley Polymers Ashlene® 527LDW Nylon 66
A specialized nylon with very high impact resistance.Data provided by the manufacturer
Deflection Temperature at 1.8 MPa (264 psi) 68.0 °C
154 °F
ASTM D648
Ashley Polymers Ashlene® 829 Nylon 6
Basic Nylon 6, low viscosity, unlubricated.Data provided by the manufacturer
Deflection Temperature at 1.8 MPa (264 psi) 67.8 °C
154 °F
annealed; ASTM D-648
Axiall 8266 Rigid PVC, Extrusion
Information provided by Georgia GulfGeorgia Gulf became Axiall Corporation in 2013.
Deflection Temperature at 1.8 MPa (264 psi) 68.0 °C
154 °F
ISO 75
BASF Ultramid® C3U BK23079 PA66/6 (Dry)
Ultramid C3U BK23079 is an injection molding, general purpose PA66/6, pigmented black grade with improved flame retardance.
Deflection Temperature at 1.8 MPa (264 psi) 68.0 °C
154 °F
ASTM D648
Beijing Chemical Industry KAIFA® HN301-G0 PA6 Resin
High flame retardant, Good flowInformation provided by Beijing Chemical Industry Research Institute (Group)
Deflection Temperature at 1.8 MPa (264 psi) 68.0 °C
154 °F
ASTM D648
Toyobo Pelprene™ S-1001 Polyester TPE
Key Feature: Pelprene S typePelprene™ can be processed into a wide variety of articles from ultra-small precision parts to sheets by injection, extrusion, and blow molding. The 'S' type is a block..
Copyright © lookpolymers.com All Rights Reserved