Thermal Properties | Metric | English | Comments |
---|---|---|---|
Deflection Temperature at 1.8 MPa (264 psi) | 43.0 °C | 109 °F | ISO 75/Method Af |
Premix Thermoplastics PRE-ELEC® PE 1295 PRE-ELEC PE 1295 is a dissipative thermoplastic compound based on PE-HD. The electrical dissipation is achieved by using special conductive carbon black. In addition to stable surface resistance bet.. |
|||
Deflection Temperature at 1.8 MPa (264 psi) | 43.0 °C | 109 °F | 75/Method Af |
Premix Thermoplastics PRE-ELEC® PE 1299 Conductive Thermoplastic Compound PRE-ELEC® PE 1299 is a conductive thermoplastic masterbatch/compound based on PE-HD. Conductivity is achieved by using special conductive carbon black. PRE-ELEC® PE 1299 has a high concentration o.. |
|||
Deflection Temperature at 1.8 MPa (264 psi) | 43.0 °C | 109 °F | ASTM D648 |
North Wood Plastics 60 HDPE + UNIFILL (20% Wood Fiber) Data provided by North Wood Plastics, Inc. UNIFILL-60 is a general purpose polyolefin compound compatible in both PP and HDPE. It is a masterbatch with 60% high quality pine wood flour filler. It.. |
|||
Deflection Temperature at 1.8 MPa (264 psi) | 43.0 °C | 109 °F | ASTM D 648 |
NOVA Chemicals Surpass® RMs341-U Octene sHDPE Rotational Molding Resin RMs341-U complies with the U.S. FDA regulations for olefin polymers and may thus be used in the United States as an article or component of an article intended for use in contact with food. RMs341-.. |
|||
Deflection Temperature at 1.8 MPa (264 psi) | 43.0 °C | 109 °F | injection molded specimen; ASTM D648 |
Phillips Sumika Marlex® ABF-080 Thermoplastic Polyolefin
(discontinued **) Applications: Air damInterior trimInformation provided by Chevron Phillips.Phillips Sumika Polypropylene Company has been shut down, as announced in 2011. This product had been discontinued prior t.. |
|||
Deflection Temperature at 1.8 MPa (264 psi) | 43.0 °C | 109 °F | ASTM D 648 |
NOVA Chemicals Surpass® RMs341-UG Octene sHDPE Rotational Molding Resin RMs341-UG complies with the U.S. FDA regulations for olefin polymers and may thus be used in the United States as an article or component of an article intended for use in contact with food. RMs341.. |
|||
Deflection Temperature at 1.8 MPa (264 psi) | 43.0 - 62.0 °C | 109 - 144 °F | Average value: 50.4 °C Grade Count:5 |
Overview of materials for High Density Polyethylene (HDPE), Wood Filled This property data is a summary of similar materials in the MatWeb database for the category "High Density Polyethylene (HDPE), Wood Filled". Each property range of values reported is minimum and ma.. |
|||
Deflection Temperature at 1.8 MPa (264 psi) | 43.0 °C | 109 °F | |
LyondellBasell Lupolen® 5021 D HDPE, Blow Molding Grade Easy flow, blow molding grade for small containers (up to 5 l), bottles for surface-active substances, household chemicals, laundry and dishwashing detergents, sanitary cleaners, cosmetics and pharm.. |
|||
Deflection Temperature at 1.8 MPa (264 psi) | 43.0 °C | 109 °F | ISO 75 |
MRC Polymers MAXTEL™ 620-BK Polypropylene Copolymer • For injection molding• Excellent process ability with high flow and high impact.Information provided by MRC Polymers Inc. |
|||
Deflection Temperature at 1.8 MPa (264 psi) | 43.0 °C | 109 °F | ISO 75 |
LyondellBasell Hifaxâ„¢ CA45 Thermoplastic Olefin Resin Key Features: medium melt flow, medium modulus thermoplastic elastomeric olefin resin, excellent balance of properties, excellent processability, good colorability, excellent surface appearanceAppli.. |
|||
Deflection Temperature at 1.8 MPa (264 psi) | 43.0 °C | 109 °F | ISO 75 |
LyondellBasell Hifaxâ„¢ CJ232 Thermoplastic Olefin Resin Key Features: medium high melt flow, medium modulus, low CLTE, paintable thermoplastic elastomeric olefin resin, excellent impact and stiffness balance, good dimensional stability, paintableApplicat.. |
|||
Deflection Temperature at 1.8 MPa (264 psi) | 43.0 °C | 109 °F | ISO 75 |
LyondellBasell Hifaxâ„¢ ETA-3104HF Thermoplastic Olefin Resin Key Features: medium melt flow, medium modulus thermoplastic elastomeric olefin resin, good impact and stiffness balance, good dimensional stability, good processabilityApplications: molded-in color.. |
|||
Deflection Temperature at 1.8 MPa (264 psi) | 43.0 °C | 109 °F | ISO 75-2 |
Borealis Daplen™ ED213AE TPO Compound Daplen ED213AE is a 20% mineral and elastomer modified polypropylene compound intended for injection molding. Daplen ED213AE is a material with excellent impact/ stiffness ratio. Thanks to its low.. |
|||
Deflection Temperature at 1.8 MPa (264 psi) | 42.8 °C | 109 °F | ASTM D648 |
Lubrizol ESTALOC® 60155 Polyester-Type, Reinforced Engineering Thermoplastic Polyurethane Features: Fast Cycling, Dimensional Stability, Durability, Aesthetics, Low Temperature ImpactUses: Injection MoldingAvailability: Americas and AsiaInformation provided by Lubrizol |
|||
Deflection Temperature at 1.8 MPa (264 psi) | 43.0 °C | 109 °F | |
Eastman Ecdel PCCE 9966 Copolyester Ether Elastomer ISO data as provided by the manufacturer, Eastman Chemical |
|||
Deflection Temperature at 1.8 MPa (264 psi) | 42.8 °C | 109 °F | ASTM D648 |
ExxonMobil HDPE HD 8760.29 High Density Polyethylene Resin Product Description: HD 8760 is a high density hexene copolymer designed to offer outstanding stiffness and processability. This resin is ideally suited for applications that require the optimum bal.. |
|||
Deflection Temperature at 1.8 MPa (264 psi) | 42.8 °C | 109 °F | ASTM D648 |
ExxonMobil HDPE HD P8760.29 High Density Polyethylene Resin Product Description: HD 8760 is a high density hexene copolymer designed to offer outstanding stiffness and processability. This resin is ideally suited for applications that require the optimum bal.. |
|||
Deflection Temperature at 1.8 MPa (264 psi) | 43.0 °C | 109 °F | ASTM D648 |
ExxonMobil HDP8760.29 Rotational Molding Resin Product Description: HD 8760 is a high density hexene copolymer designed to offer outstanding stiffness and processability. This resin is ideally suited for applications that require the optimum bal.. |
|||
Deflection Temperature at 1.8 MPa (264 psi) | 43.0 - 46.0 °C | 109 - 115 °F | ASTM D648 |
3D Systems Accura® 50 Plastic for SLA® Systems Simulate the properties and appearance of molded ABS. For use with the Viper™ SLA® system, SLA 3500, SLA 5000 and SLA 7000 systems.ApplicationsFunctional components for assemblies, mock-ups and te.. |
|||
Deflection Temperature at 1.8 MPa (264 psi) | 42.8 °C | 109 °F | |
Aclo Accucomp Polyethylene HD0200L High Density |
|||
Deflection Temperature at 1.8 MPa (264 psi) | 42.8 °C | 109 °F | |
Aclo Accutech Polypropylene Homopolymer HP0339G10M20CL Glass/Mineral Reinforced Coupled |
|||
Deflection Temperature at 1.8 MPa (264 psi) | 43.0 °C | 109 °F | ISO 75 |
BASF Ultramid® 8254 HS BK-102 PA6 (Dry) Ultramid 8254 HS is a highly flexible, heat stabilized, impact modified nylon 6 extrusion grade for tubing applications. |
|||
Deflection Temperature at 1.8 MPa (264 psi) | 43.0 °C | 109 °F | |
Arkema Group Appryl® 7280 Polypropylene - Polyethylene Copolymer PP/PE copolymer colored directly or during the injection molding process. This grade with a very good impact test at low temperature, has been developed for bumpers applications for the automotive i.. |
|||
Deflection Temperature at 1.8 MPa (264 psi) | 43.0 - 54.0 °C | 109 - 129 °F | ASTM D648 |
Arkema Group KYNAR FLEX® 3120-15 Polyvinylidene Fluoride Copolymer - Extrusion & Molding Characteristics: Natural resin - translucent, off-white hemispheres. Flexible, flame and smoke suppressant. High stability in harsh thermal, chemical and ultraviolet environments. High toughness.. |
|||
Deflection Temperature at 1.8 MPa (264 psi) | 43.0 - 54.0 °C | 109 - 129 °F | ASTM D648 |
Arkema Group KYNAR FLEX® 3120-50 Polyvinylidene Fluoride Copolymer - Extrusion & Molding Characteristics: Natural resin - translucent, off-white hemispheres. Flexible, 150°C temperature rating. High stability in harsh thermal, chemical and ultraviolet environments. High toughness a.. |
|||
Deflection Temperature at 1.8 MPa (264 psi) | 43.0 - 49.0 °C | 109 - 120 °F | ASTM D648 |
3D Systems Accura® 40 Plastic for SLA® Systems 40 Accura "Nd" type material - for use with Viper SLA, and SLA 3500, 5000 and 7000 systems.ApplicationsHigh temperature testing:Automotive "under-the-hood" partsIntake manifoldsLighting components a.. |
|||
Deflection Temperature at 1.8 MPa (264 psi) | 43.0 °C | 109 °F | ASTM D648 |
Ashley Polymers Ashlene® 727 Nylon 6 A modified nylon for applications requiring flexibility.Data provided by the manufacturer |
|||
Deflection Temperature at 1.8 MPa (264 psi) | 43.0 °C | 109 °F | ASTM D648 |
ExxonMobil HD 8760.29 Rotational Molding Resin Product Description: HD 8760 is a high density hexene copolymer designed to offer outstanding stiffness and processability. This resin is ideally suited for applications that require the optimum bal.. |