Thermal Properties | Metric | English | Comments |
---|---|---|---|
CTE, linear | 17.0 µm/m-°C @Temperature 300 °C |
9.44 µin/in-°F @Temperature 572 °F |
|
Outokumpu 4318 Cr-Ni Austenitic Stainless Steel Applications: Wet corrosion resistance and general service.Available in hot rolled strip/sheet (CPP) and cold rolled strip sheet forms. |
|||
CTE, linear | 17.0 - 18.0 µm/m-°C @Temperature 20.0 - 300 °C |
9.44 - 10.0 µin/in-°F @Temperature 68.0 - 572 °F |
|
PEAK Werkstoff DISPAL S263 Aluminum Alloy, AlSi25Cu3Fe3Ni3MgCoTi, Condition T4 Excellent properties:abrasive stabilityhigh stiffness (E-modulus)resistance even at high temperaturesgood grindabilityPEAK DISPAL materials allow the manufacturing of pistons for highest operational.. |
|||
CTE, linear | 17.0 µm/m-°C @Temperature 23.0 °C |
9.44 µin/in-°F @Temperature 73.4 °F |
MD; ASTM D696 |
Mitsui AURUM® JGN3030 Thermoplastic Polyimide Resin, Amorphous
(discontinued **) AURUM® is an easy melt, processable and recyclable thermoplastic polyimide resin that provides continuous service temperatures to 465° F in its amorphous state and up to 550° F when annealed to i.. |
|||
CTE, linear | 17.0 µm/m-°C @Temperature 20.0 - 300 °C |
9.44 µin/in-°F @Temperature 68.0 - 572 °F |
|
Industeel CLC 18.10 LN Nitrogen Containing 18Cr-10Ni Austenitic Stainless Steel Description: CLC 18.10LN is a 18Cr-10Ni austenitic stainless steel with specific Nitrogen additions. Its low carbon content avoids intergranular corrosion, even on welded pieces without an ulterior .. |
|||
CTE, linear | 17.0 µm/m-°C @Temperature 20.0 - 300 °C |
9.44 µin/in-°F @Temperature 68.0 - 572 °F |
|
Industeel CLC 18.10Ti Titanium-Stabilized 18Cr-10Ni Austenitic Stainless Steel CLC 18-10Ti is a 18Cr-9Ni austenitic stainless steel stabilized with some Titanium additions. This is a basic grades in the stainless steel range. Titanium bearing (carbide forming element) avoids i.. |
|||
CTE, linear | 17.0 µm/m-°C @Temperature 20.0 - 500 °C |
9.44 µin/in-°F @Temperature 68.0 - 932 °F |
|
Industeel URANUS® B6 N Multipurpose Austenitic Stainless Steel with PREN = 36 Description: URANUS® B6 (904L) is a multipurpose 20 Cr - 4.3 Mo high corrosion resistance austenitic stainless steel developed 40 years ago by CLI. The UR B6N is alloyed with nitrogen (~ 0.13%) t.. |
|||
CTE, linear | 17.0 µm/m-°C @Temperature 25.0 - 1000 °C |
9.44 µin/in-°F @Temperature 77.0 - 1830 °F |
|
Haynes 25 alloy, cold worked sheet, 20 % cold reduction Excellent high-temperature strength with good resistance to oxidizing environments up to 980°C for prolonged exposures and excellent resistance to sulfidation and excellent resistance to metal ga.. |
|||
CTE, linear | 17.0 µm/m-°C @Temperature 25.0 - 1000 °C |
9.44 µin/in-°F @Temperature 77.0 - 1830 °F |
|
Haynes 25 alloy, hot rolled and 1230°C solution annealed sheet Excellent high-temperature strength with good resistance to oxidizing environments up to 980°C for prolonged exposures and excellent resistance to sulfidation and excellent resistance to metal ga.. |
|||
CTE, linear | 17.0 µm/m-°C @Temperature 0.000 - 600 °C |
9.44 µin/in-°F @Temperature 32.0 - 1110 °F |
|
Industeel SIRIUS 800 Heat Resistant Alloy Description: The SIRIUS® 800, H and H+ grades are three variants of a high chromium and nickel austenitic alloy which combines good corrosion and creep resistance. SIRIUS® 800 is employed at t.. |
|||
CTE, linear | 17.0 µm/m-°C @Temperature 25.0 - 1000 °C |
9.44 µin/in-°F @Temperature 77.0 - 1830 °F |
|
Haynes 25 alloy, room temperature after 20% cold reduction, 1175°C anneal for 5 minutes Excellent high-temperature strength with good resistance to oxidizing environments up to 980°C for prolonged exposures and excellent resistance to sulfidation and excellent resistance to metal ga.. |
|||
CTE, linear | 17.0 µm/m-°C @Temperature 25.0 - 1000 °C |
9.44 µin/in-°F @Temperature 77.0 - 1830 °F |
|
Haynes 25 alloy, room temperature after 25% cold reduction, 1120°C anneal for 5 minutes Excellent high-temperature strength with good resistance to oxidizing environments up to 980°C for prolonged exposures and excellent resistance to sulfidation and excellent resistance to metal ga.. |
|||
CTE, linear | 17.0 µm/m-°C @Temperature 25.0 - 1000 °C |
9.44 µin/in-°F @Temperature 77.0 - 1830 °F |
|
Haynes 25 alloy, room temperature sheet after 100 hours of 760°C exposure Excellent high-temperature strength with good resistance to oxidizing environments up to 980°C for prolonged exposures and excellent resistance to sulfidation and excellent resistance to metal ga.. |
|||
CTE, linear | 17.0 µm/m-°C @Temperature 25.0 - 900 °C |
9.44 µin/in-°F @Temperature 77.0 - 1650 °F |
|
Haynes 556® alloy, 10% cold reduction Effective resistance to sulfidizing, carburizing, and chlorine-bearing environments at high temperature; good oxidation resistance, fabricability, and excellent high-temperature strength; resists co.. |
|||
CTE, linear | 17.0 µm/m-°C @Temperature 25.0 - 900 °C |
9.44 µin/in-°F @Temperature 77.0 - 1650 °F |
|
Haynes 556® alloy, 10% cold reduction, 1121°C anneal for 5 minutes Effective resistance to sulfidizing, carburizing, and chlorine-bearing environments at high temperature; good oxidation resistance, fabricability, and excellent high-temperature strength; resists co.. |
|||
CTE, linear | 17.0 µm/m-°C @Temperature 25.0 - 900 °C |
9.44 µin/in-°F @Temperature 77.0 - 1650 °F |
|
Haynes 556® alloy, 50% cold reduction, 1121°C anneal for 5 minutes Effective resistance to sulfidizing, carburizing, and chlorine-bearing environments at high temperature; good oxidation resistance, fabricability, and excellent high-temperature strength; resists co.. |
|||
CTE, linear | 17.0 µm/m-°C @Temperature 25.0 - 900 °C |
9.44 µin/in-°F @Temperature 77.0 - 1650 °F |
|
Haynes 556® alloy, bar, after 8000 hours at 760°C (1400°F) Effective resistance to sulfidizing, carburizing, and chlorine-bearing environments at high temperature; good oxidation resistance, fabricability, and excellent high-temperature strength; resists co.. |
|||
CTE, linear | 17.0 µm/m-°C @Temperature 0.000 - 600 °C |
9.44 µin/in-°F @Temperature 32.0 - 1110 °F |
|
CLAL-MSX ARCAP Anticorrosion AP1 H11 1/4 hard, Rolled Copper Alloy Description: The AP1D grade has been developed especially for being machined by lathe. The very good machineability of the AP1D grade may be summerised by: cutting speed up to 150 m/minute (accordin.. |
|||
CTE, linear | 17.0 µm/m-°C @Temperature 0.000 - 600 °C |
9.44 µin/in-°F @Temperature 32.0 - 1110 °F |
|
CLAL-MSX ARCAP Anticorrosion AP1C H14 4/4 hard, Rolled Copper Alloy Description: The AP1C grade (used in rods for parts that are to be deformed by torsion, bending, riveting, swaging... and for welding) and the AP1 grade (sheet, strip, wire, tubes) is machineable un.. |
|||
CTE, linear | 17.0 µm/m-°C @Temperature 0.000 - 600 °C |
9.44 µin/in-°F @Temperature 32.0 - 1110 °F |
|
CLAL-MSX ARCAP Anticorrosion AP4 0 Annealed, Drawn Copper Alloy Description: The AP4 grade is less easy to turn than the other grades of ARCAP. It can however be machined without more difficulty than the nickel chromium molybdenum steels.High Corrosion Resistanc.. |
|||
CTE, linear | 17.0 µm/m-°C @Temperature 25.0 - 1000 °C |
9.44 µin/in-°F @Temperature 77.0 - 1830 °F |
|
Haynes 25 alloy, room temperature after 10% cold reduction Excellent high-temperature strength with good resistance to oxidizing environments up to 980°C for prolonged exposures and excellent resistance to sulfidation and excellent resistance to metal gall.. |
|||
CTE, linear | 17.0 µm/m-°C @Temperature 25.0 - 900 °C |
9.44 µin/in-°F @Temperature 77.0 - 1650 °F |
|
Haynes 556® alloy, 20% cold reduction, 1010°C anneal for 5 minutes Effective resistance to sulfidizing, carburizing, and chlorine-bearing environments at high temperature; good oxidation resistance, fabricability, and excellent high-temperature strength; resists co.. |
|||
CTE, linear | 17.0 µm/m-°C @Temperature 400 °C |
9.44 µin/in-°F @Temperature 752 °F |
|
Outokumpu 725LN Austenitic Stainless Steel Applications: Wet corrosion resistance and general service.Available in hot rolled plate (Quarto) form. |
|||
CTE, linear | 17.0 µm/m-°C @Temperature 20.0 - 300 °C |
9.44 µin/in-°F @Temperature 68.0 - 572 °F |
|
Industeel CLC 18.9 L General Purpose 18Cr-9Ni Austenitic Stainless Steel Description: CLC 18-9L is a 18Cr-9Ni austenitic stainless steel. The grade contains small amount of ferrite (~ 3%) after solution annealing (1000-1100°C – 1832-2012°F) and water quenching. This k.. |