Thermal Properties | Metric | English | Comments |
---|---|---|---|
Melting Point | 128 °C | 262 °F | Internal method |
Polimeri Europa Clearflex® FH 50 Linear Medium Density Polyethylene Clearflex FH 50 is a linear medium density polyethylene, with antioxidants, suitable for blown film extrusion.Films manufactured with Clearflex FH 50 are characterized by a good balance between toug.. |
|||
Melting Point | 128 °C | 262 °F | ASTM D3417 |
NOVA Chemicals Novapol® HD-2007-H HDPE Extrusion Resin Features: Excellent ESCR and toughness, high strength, excellent processability, very high melt strength.Applications: pipe, water pipe, fuel gas pipe, re-lining pipe, steel pipe coating.Data provid.. |
|||
Melting Point | 128 °C | 262 °F | Peak Melting Temperature; ExxonMobil Method |
ExxonMobil LL 3402.48 Cast Film Resin
(discontinued **) LL 3402.48 is a hexene medium density polyethylene cast film grade for applications requiring high strength and high stiffness. It can also be used in blown films. Films produced from this resin ex.. |
|||
Melting Point | 128 °C | 262 °F | ASTM D3417 |
NOVA Chemicals Novapol® TR-0535-U Hexene MDPE Rotational Molding Resin
(discontinued **) Molded Plaque Properties. Features: Hexene Copolymer, excellent impact strength, excellent ESCR.Applications: large parts, agricultural storage tanks.Data provided by the manufacturer. |
|||
Melting Point | 128 - 132 °C | 262 - 270 °F | |
M Chemical GUARD DOGâ„¢ UVP Benzotriazole UV Absorber GUARD DOGâ„¢ UVP light stabilizer is a derivative of Benzotriazole that has exceptionally strong and broad-range UV absorption properties (UV A 315 -400 nm and UV B 290 - 314 nm) throughout the U.. |
|||
Melting Point | 128 - 133 °C | 262 - 271 °F | |
Indium Corp. Indalloy 73 Bismuth-Tin Solder Alloy Information Provided by Indium Corporation |
|||
Melting Point | 128 °C | 262 °F | ASTM D2117 |
Global MB-6366 High Density Polyethylene Description-high density for high quality, excellent creep & chemical resistanceApplications-drinking water pipe, industrial pipe, sewer pipeInformation provided by Global Polymers Corporation. |
|||
Melting Point | 128 °C | 262 °F | ASTM D2117 |
Lushan L-5R Polyethylene Copolymer Adhesive for Steel Pipe Coating Copolymer adhesive resin Lushan L-5R series is maleic anhydride grafted polyethylene which could be in granule or powder form. It was developed by Lushan with independent patent technologies and pro.. |
|||
Melting Point | 128 °C | 262 °F | ASTM D2117 |
Lushan M-10A Adhesive Resin for Multi-layer Sausage Casing film Adhesive resin Lushan series for sausages casing film is anhydride-modified polyethylene product and is available in pellet form. Adhesive resin Lushan series for sausages casing film is designed fo.. |
|||
Melting Point | 128 °C | 262 °F | ASTM D2117 |
Lushan VB150 Adhesive Resin for Aluminum-Plastic Composite Panel (ACP) Adhesive resin Lushan series for Aluminum-plastic Composite Panel (ACP) proved required bonding strength between aluminum and the filled polyethylene core. The sandwich structure of Aluminum-plastic.. |
|||
Melting Point | 128 °C | 262 °F | ASTM D2117 |
Lushan M-2 Adhesive Resin for Barrier Container and Tube Adhesive resin Lushan series for barrier container and tube is used for bonding a wide variety of materials, It’s most often used to adhering PE and EVOH, PP and EVOH, etc. Adhesive resins Lush.. |
|||
Melting Point | >= 128 °C | >= 262 °F | ISO 3146 |
Borealis Borcoat™ HE3453 Natural High Density Polyethylene for Steel Pipe Coating Borcoat HE3453 is a natural and colorable high density polyethylene produced with the Borstar technology in similar conditions as the black ready made top coat Borcoat HE3450. Borcoat HE3453 is rec.. |
|||
Melting Point | 128 - 132 °C | 262 - 270 °F | ISO 3146 |
Borealis Bormed™ TD109CF Polypropylene Copolymer Bormed™ TD109CF is a propylene alpha olefin copolymer. This grade is suitable for the manufacturing of unoriented films on cast and tubular quench film lines. Applications: lamination films, food.. |
|||
Melting Point | 128 - 132 °C | 262 - 270 °F | ISO 3146 |
Borealis Borseal™ TD110BF Terpolymer for BOPP Film Borseal TD110BF is a C2/C4 terapolymer film resin.Borseal TD110BF is especially developed for use as sealing layers in coextruded BOPP film (manufactured on Stenter frame and double bubble film proc.. |
|||
Melting Point | 128 - 132 °C | 262 - 270 °F | ISO 3146 |
Borealis Borseal™ TD215BF Terpolymer for BOPP Film Borseal TD215BF is a C2/C4 terapolymer film resin.Borseal TD215BF is especially developed for use as sealing layers in coextruded BOPP film (manufactured on Stenter frame and double bubble film proc.. |
|||
Melting Point | 128 - 132 °C | 262 - 270 °F | ISO 3146 |
Borealis Borseal™ TD218BF Terpolymer for BOPP Film Borseal TD218BF is a C2/C4 terapolymer film resin.Borseal TD218BF is especially developed for use as sealing layers in coextruded BOPP film (manufactured on Stenter frame and double bubble film proc.. |
|||
Melting Point | 128 °C | 262 °F | ISO 11357-3 |
Borealis Borstar® FB3450 HDPE for Film Extrusion Borstar® FB3450 is a high density polyethylene. Borstar® FB3450 is well suited for multilayer coextruded films where higher stiffness and toughness than in standard LDPE and LLDPE is required. Ap.. |
|||
Melting Point | 128 °C | 262 °F | |
Lubrizol ESTANE® 58238 Ester Based Thermoplastic Polyurethane Features: Highly Elastic Compound and Good Recovery for a Rubber-Like CharacterUses: Flat Die/Film Extrusion and Blown Film and Injection Molding and Profile ExtrusionAvailable in Americas, Europe, .. |
|||
Melting Point | 128 - 132 °C | 262 - 270 °F | ISO 3146 |
Borealis Borseal™ TD210BF Terpolymer for BOPP Film Borseal TD210BF is a C2/C4 terapolymer film resin especially developed for use as sealing layers in coextruded BOPP film (manufactured on stenter frame and double bubble film process).Borseal TD210B.. |
|||
Melting Point | 128 - 132 °C | 262 - 270 °F | ISO 3146 |
Borealis Borseal™ TD211BF Terpolymer for BOPP Film Borseal TD211BF is a C2/C4 terapolymer film resin especially developed for use as sealing layers in coextruded BOPP film (manufactured on stenter frame and double bubble film process).Borseal TD211B.. |
|||
Melting Point | 128 °C | 262 °F | ASTM D-3418 |
Chevron Phillips Marlex® HMN TR-938/938G Polyethylene; MDPE Medium density polyethylene. These hexene copolymers are tailored for rotational molding applications that require: Wide process windows and good flowLong-term UV stabilizationExcellent impact stre.. |
|||
Melting Point | 128 °C | 262 °F | ASTM D3418 |
DuPont™ Fusabond® E158 Polymer Modifier DuPont™ Fusabond® E158 is a anhydride modified polyethylene. Uses: Adhesives Pipe Coating Tie-Layer |
|||
Melting Point | 128 °C | 262 °F | ASTM D3418, ISO 3146 |
DuPont™ Fusabond® E158H Polymer Modifier DuPont™ Fusabond® E158H is a anhydride modified polyethylene. Uses: Adhesives Coating Applications Pipe Coating Tie-Layer |
|||
Melting Point | 128 °C | 262 °F | ASTM D3418 |
ExxonMobil LL 6407.67 Injection Molding Resin L Product Description: LL 6407 is a narrow molecular weight hexene copolymer designed for applications that require outstanding environmental stress crack resistance. This resin offers good processa.. |
|||
Melting Point | 128 °C | 262 °F | Dow Method (DSC) |
Dow DMDA-8940 NT 7 High Density Polyethylene Resin DOW DMDA-8940 NT 7 is produced using UNIPOL™ process technology. It is intended for use in a broad range of injection molding applications such as housewares, toys, food containers and pails. Info.. |
|||
Melting Point | 128 °C | 262 °F | Dow Method (DSC) |
Dow DMDA-8965 NT 7 High Density Polyethylene Resin DOW DMDA-8965 NT 7 is produced using UNIPOL™ process technology. It is intended for use in thin wall injection molding applications such as food containers. Information provided by Dow |
|||
Melting Point | 128 °C | 262 °F | Dow Method (DSC) |
Dow DMDA-8980 NT 7 High Density Polyethylene Resin DOW DMDA-8980 NT 7 is produced using UNIPOL™ process technology. It is intended for use in thin wall injection molding applications such as food containers. Information provided by Dow |
|||
Melting Point | 128 °C | 262 °F | |
Addcomp PRIEX® 11006 Maleic Anhydride Grafted HDPE Uses: Enhance sealability in bi-oriented polypropylene film packagingIncrease adhesion between metallic or textile wire and polymer coatingAchieve high compatibility between glass or other natural f.. |
|||
Melting Point | 128 - 131 °C | 262 - 268 °F | crystalline; DSC |
Total Lacqtene® 2001 TBK 46 HDPE pipe
(discontinued **) LACQTENE® 2001 TBK 46 is a high density polyethylene produced by the gas phase polymerization process. LACQTENE® 2001 TBK 46 is a black compound especially developed for pressure pipe for gas and .. |