Thermal Properties | Metric | English | Comments |
---|---|---|---|
Minimum Service Temperature, Air | -25.0 °C | -13.0 °F | Recommended |
Nye Lubricants 748S (RL) Synthetic Oil Information provided by Nye Lubricants. |
|||
Minimum Service Temperature, Air | -25.0 °C | -13.0 °F | Recommended |
Nye Lubricants 748S-UV (RL) Synthetic Oil Information provided by Nye Lubricants. |
|||
Minimum Service Temperature, Air | -25.0 °C | -13.0 °F | Recommended |
Nye Lubricants UniFlor 8180 (479) (UF) Synthetic Oil Information provided by Nye Lubricants. |
|||
Minimum Service Temperature, Air | -25.0 °C | -13.0 °F | Recommended |
Nye Lubricants UniFlor 8182R (837RP) (UF) Synthetic Oil Information provided by Nye Lubricants. |
|||
Minimum Service Temperature, Air | -25.0 °C | -13.0 °F | Recommended |
Nye Lubricants UniFlor 8190 (483) (UF) Synthetic Oil Information provided by Nye Lubricants. |
|||
Minimum Service Temperature, Air | -25.0 °C | -13.0 °F | Recommended |
Nye Lubricants UniFlor 8623 (717C) (UF) Synthetic Oil Information provided by Nye Lubricants. |
|||
Minimum Service Temperature, Air | -25.0 °C | -13.0 °F | Recommended |
Nye Lubricants UniFlor 8623G (UF) Synthetic Oil Information provided by Nye Lubricants. |
|||
Minimum Service Temperature, Air | -25.0 °C | -13.0 °F | |
Polikim High Density Polyethylene (HDPE) High density polyethylene is preferred when resistance to chemicals and weather is the priority. As it can be supplied in large dimensions and can be welded, its use in construction of tanks and was.. |
|||
Minimum Service Temperature, Air | -25.0 °C | -13.0 °F | Temperature at which stiffness does not exceed 70 Mpa |
Precision Polymer Engineering N70N Nitrile Rubber Nitrile Butadiene Rubber (NBR) 66-75 °IRHD. Copolymer of acrylonitrile and butadiene. To meet Aerospace Material Specification DTD5595A Grade 70.Applications: Synthetic rubber resistant to petrole.. |
|||
Minimum Service Temperature, Air | -25.0 °C | -13.0 °F | ASTM D2137, Non-brittle after 3 minutes |
Precision Polymer Engineering V72H Fluoroelastomer Compound Fluoroelastomer Rubber, 65-75 °IRHD. FDA grade. Copolymer of vinylidene fluoride and hexafluoropropylene. Formulated using only those ingredients determined by the United States Food and Drug Admi.. |
|||
Minimum Service Temperature, Air | -25.0 °C | -13.0 °F | |
Precision Polymer Engineering Z95X Hydrogenated NBR Compound Peroxide cured, Hydrogenated Nitrile Rubber, 85-95 °IRHD. Medium acrylonitrile content (ACN = 36%). ASTM designation = HNBR.Applications: Gas blister resistant compound designed for use in applica.. |
|||
Minimum Service Temperature, Air | -25.0 °C | -13.0 °F | Flex TR10; ASTM D1329 |
Parker Chomerics CHO-SEAL V6433 Conductive Elastomer Material of choice for extensive fluid resistance; no corrosion resistance.Molded onlyRoHS CompliantInformation provided by Chomerics |
|||
Minimum Service Temperature, Air | -25.0 °C | -13.0 °F | |
Freudenberg Simrit Simriz® 481 Low Temperature FFKT Perfluoroelastomer Compound Perfluoro elastomers – or FFKM for short – have an ideal combination of characteristics, with their excellent chemical resistance, high level of temperature resistance, and high levels of .. |
|||
Minimum Service Temperature, Air | -25.0 °C | -13.0 °F | |
Freudenberg Simrit V60WH Non-Black Compound Specific compounding ingredients can reduce or eliminate the presence of carbon black. These compounds may provide improved resistance to oxidative environments and reactive plasmas. The inorganic p.. |
|||
Minimum Service Temperature, Air | -25.0 °C | -13.0 °F | |
GrafTech eGRAF® HITHERM™ HT-2505 Graphite with Polymer Additive Made from natural graphite, eGRAF® HITHERM™ thermal interface materials are designed for use in applications requiring low contact resistance and high thermal conductivity. HITHERM™ mat.. |
|||
Minimum Service Temperature, Air | -25.0 °C | -13.0 °F | |
GrafTech eGRAF® HITHERM™ HT-2510 Graphite with Polymer Additive Made from natural graphite, eGRAF® HITHERM™ thermal interface materials are designed for use in applications requiring low contact resistance and high thermal conductivity. HITHERM™ mat.. |
|||
Minimum Service Temperature, Air | -25.0 °C | -13.0 °F | Low Temperature Flexural Test; DIN 53361 |
Lucobit Lucobit® 1221 Ethylene Copolymer Bitumen Lucobit® combines the positive properties of polyolefins and bitumen. The material is black and consists of mixtures based on high quality polyethylene copolymers with varying additions of speci.. |
|||
Minimum Service Temperature, Air | -25.0 °C | -13.0 °F | |
Freudenberg Simrit Simriz® 482 Low Temperature FFKT Perfluoroelastomer Compound Perfluoro elastomers – or FFKM for short – have an ideal combination of characteristics, with their excellent chemical resistance, high level of temperature resistance, and high levels of .. |
|||
Minimum Service Temperature, Air | -25.0 °C | -13.0 °F | as heat transfer fluid |
Solvay Specialty Polymers Galden® HT200 PFPE Heat Transfer Fluid Galden® HT grades are specifically recommended for use as heat transfer fluids.Galden® PFPE is a line of high-performance, inert, fluorinated fluids. Various grades, with a variety of service.. |
|||
Minimum Service Temperature, Air | -25.0 °C | -13.0 °F | |
Trelleborg B937 Nitrile Rubber Nitrile rubber or acrylonitrile-butadiene rubber is a copolymer of butadiene and acrylonitrile.PropertiesGood general resistance to oils.Good mechanical properties especially tensile strength, flexi.. |
|||
Minimum Service Temperature, Air | -25.0 °C | -13.0 °F | |
Trelleborg Commercial Neoprene® C798 Chloroprene CR or Chloroprene is a homopolymer of chloroprene or chlorobutadiene. NEOPRENE®PropertiesExcellent mechanical and abrasion properties even without reinforcing fillers.Reasonable resilience in grade.. |
|||
Minimum Service Temperature, Air | -25.0 °C | -13.0 °F | |
Trelleborg R608 Commercial Natural Rubber Polyisoprene All information provided by Trelleborg |
|||
Minimum Service Temperature, Air | -25.0 °C | -13.0 °F | |
Trelleborg R661 Natural Rubber Polyisoprene All information provided by Trelleborg |
|||
Minimum Service Temperature, Air | -25.0 °C | -13.0 °F | |
Dow Corning MOLYKOTE® G-0102 Heavy duty bearing grease for applications in presence of waterInformation provided by Dow Corning |
|||
Minimum Service Temperature, Air | -25.0 °C | -13.0 °F | JIS-K-6723 |
Denka REOMER G G5479 Thermoplastic Elastomer, For Extrusion Essentially a thermoplastic elastomer with the characteristics of PVC resin and rubber, with excellent rubber-like elasticity. Offers excellent rubbery characteristics, such as permanent compressive.. |
|||
Minimum Service Temperature, Air | -25.0 °C | -13.0 °F | Recommended |
Nye Lubricants 865 (FG) Synthetic Oil Information provided by Nye Lubricants. |
|||
Minimum Service Temperature, Air | -25.0 °C | -13.0 °F | |
Trelleborg R660 Natural Rubber Polyisoprene All information provided by Trelleborg |
|||
Minimum Service Temperature, Air | -25.0 °C | -13.0 °F | |
Trelleborg Z600 Commercial SBR Rubber Styrene-butadiene Rubber is a co-polymer of styrene and butadiene.PropertiesIts general properties are similar to those of natural rubber, but it is more resistant to aging and temperature, and like.. |
|||
Minimum Service Temperature, Air | -25.0 °C | -13.0 °F | |
Hydrogenated Nitrile Rubber (HNBR) |