- HOME
- POLYMER SEARCH
- Polymer Property : Vicat Softening Point = 244 °F
Polymer Property : Vicat Softening Point = 244 °F Product List
Thermal PropertiesTips: 30 items are displayed at most. For the rest of the results, please contact customer service.
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Vicat Softening Point | 118 °C | 244 °F | Rate B/120; ISO 306 |
| SABIC Innovative Plastics Cycolac® INP630 ABS INP630 is a specialty polymer that increases the service temperature of products. Can be used with a impact modifier to provide impact strength as well as high heat resistance.
Provides excellent hi.. |
|||
| Vicat Softening Point | 118 °C | 244 °F | Rate B; 4 mm thick;10.0 mm wide molded rod; ISO 306/B50 |
| Premix Thermoplastics PRE-ELEC® PC/ABS 1420 PRE-ELEC PC/ABS 1420 is a conductive thermoplastic compound based on a PC/ABS blend. Conductivity is achieved by using special conductive carbon black. In addition to a low electrical resistivity PR.. |
|||
| Vicat Softening Point | 118 °C | 244 °F | Rate B/50; ISO 306 |
| SABIC Innovative Plastics Cycoloy® CE8510 PC+ABS (Asia Pacific) Extrusion grade PC/ABS. Low viscosity, high impact and ductility.This data was supplied by SABIC-IP for the Asia Pacific region. |
|||
| Vicat Softening Point | 118 °C | 244 °F | Rate B/120; ISO 306 |
| SABIC Innovative Plastics Cycoloy® CX7510 PC+ABS Cycoloy* CX7510 resin is an injection moldable, flame retardant PC/ABS blend, with non-chlorinated & non-brominated flame retardants. Key features of Cycoloy CX7510 resin include high heat, high flo.. |
|||
| Vicat Softening Point | 118 °C | 244 °F | ISO 306 |
| Total Lacqtene® 2003 PBK 41 HDPE pipe, sheet
(discontinued **) LACQTENE® 2003 PBK 41 is a high density polyethylene produced by the gas phase polymerization process with hexene as comonomer. LACQTENE® 2003 PBK 41 is a black compound especially developed for i.. |
|||
| Vicat Softening Point | 118 °C | 244 °F | ASTM D1525 |
| NOVA Chemicals Sclair® 8504 BK, 8504 GBK MDPE Rotational Molding Resin
(discontinued **) Features: Low melt index, excellent ESCR, high toughness at low temperatures.Applications: Large chemical storage tanks.Data provided by the manufacturer. |
|||
| Vicat Softening Point | 118 °C | 244 °F | ASTM D1525 |
| NOVA Chemicals Sclair® 8504 UV8D, 8504G UV8D MDPE Rotational Molding Resin
(discontinued **) Features: Low melt index, excellent ESCR, high toughness at low temperatures.Applications: Large chemical storage tanks.Data provided by the manufacturer. |
|||
| Vicat Softening Point | 118 °C | 244 °F | Rate B/50; ISO 306 |
| SABIC Innovative Plastics Xenoy® EXXY0113 PBT (Asia Pacific) Blow Moldable Impact modified XENOYThis data was supplied by SABIC-IP for the Asia Pacific region. |
|||
| Vicat Softening Point | 118 °C | 244 °F | Rate B/120; ISO 306 |
| SABIC Innovative Plastics Xenoy® X2420 PC+POLYESTER (Asia Pacific) Xenoy*X2420 is a 10% glass filled, high flow, impact modified, injection moldable grade designed for high flow and impact strength. X2420 has enhanced melt flowability, impact ductility and broad co.. |
|||
| Vicat Softening Point | 118 °C | 244 °F | Rate B/50; ISO 306 |
| SABIC Innovative Plastics Xenoy® X6800BM PBT (Asia Pacific) Blow moldable, impact modifed XENOY |
|||
| Vicat Softening Point | >= 118 °C | >= 244 °F | 10 hours at load |
| Sibur MPP 23007-E10 Frost Resistant Polypropylene For production of parts for automobiles (bumpers), accumulators, articles of technical purpose, including those electrical and exploited under low temperatures |
|||
| Vicat Softening Point | 118 °C | 244 °F | B/50; ISO R306 |
| Samsung Cheil Industries Starex® SR-0330M ABS, Unreinforced Heat Resistant Information provided by Samsung Cheil Industries. |
|||
| Vicat Softening Point | 118 °C | 244 °F | VST/A/50; ISO 306 |
| Styrolution Terluran® HH-112 Q109 ABS Description: Injection-molding grade with highest heat resistance, high rigidity and medium impact strength.Information provided by STYROLUTION, which is a joint venture between BASF and INEOS |
|||
| Vicat Softening Point | 118 °C | 244 °F | VST/A/50; ISO 306 |
| Styrolution Terluran® HH-112 Q42 Gray 10072 ABS Description: Injection-molding grade with highest heat resistance, high rigidity and medium impact strength.Information provided by STYROLUTION, which is a joint venture between BASF and INEOS |
|||
| Vicat Softening Point | 118 °C | 244 °F | VST/B/50; ISO 306 |
| Styrolution Terblend® N NG-02 EF 8% Glass Filled ABS+PA (Conditioned) Description: Terblend® N NG-02 EF is a glass fiber reinforced UV stabilized ABS/PA blend with excellent dimensional stability and high impact strength. The enhanced flowability enables excellent .. |
|||
| Vicat Softening Point | 118 °C | 244 °F | ISO 306 |
| Unipetrol PE HD LITEN® BB 10 HDPE Made for blow molding, extrusion, and pipe applications.Information provided by Unipetrol RPA |
|||
| Vicat Softening Point | 118 °C | 244 °F | ISO 306 |
| Total MDPE HF 513 Medium Density Polyethylene, Blown Film MDPE HF 513 is a medium density polyethylene produced by slurry loop low pressure process with hexene as co-monomer.MDPE HF 513 is a semi-high molecular weight polyethylene giving excellent mechanic.. |
|||
| Vicat Softening Point | 118 °C | 244 °F | A (10N); ISO 306 |
| Borealis Daplen™ SB4411/2 Polypropylene Compound Elastomer and Mineral Modified Daplen SB4411/2 is a 10% mineral and elastomer modified polypropylene compound intended for injection molding. The product is available in black, but other colors can be provided on request.Daplen .. |
|||
| Vicat Softening Point | 118 °C | 244 °F | A (10N); ISO 306 |
| Borealis Daplen™ VB4411 TPO Compound Daplen VB4411 is a 10% mineral and elastomer modified polypropylene compound intended for injection molding. Daplen VB4411 is a material with excellent impact /stiffness ratio. Thanks to its low th.. |
|||
| Vicat Softening Point | 118 °C | 244 °F | ISO 306 |
| Total Lumicene® mPE M 2735 S01 Metallocene Polyethylene, Cast Film Lumicene® mPE M 2735 S01 is a Lumicene® metallocene based Polyethylene with hexene as comonomer.Lumicene® mPE M 2735 S01 can be processed at high output rates with low extrusion pressure, low nec.. |
|||
| Vicat Softening Point | 118 °C | 244 °F | |
| Covestro Bayblend® R-T 60 Polycarbonate/ABS Blend Recycled grade in which carefully reclaimed old parts and production rejects and/or scrap from all processes of manufacturing or processing undergo material recycling. Slightly decreased impact stre.. |
|||
| Vicat Softening Point | 118 °C | 244 °F | |
| Covestro Bayblend® KU 1-1446 Polycarbonate/ABS Blend Good cold impact strength and fuel resistance.Applications: Automotive industry (interior and body parts).Information provided by Bayer.As of 1 September 2015, Bayer MaterialScience was separated fr.. |
|||
| Vicat Softening Point | 118 °C | 244 °F | |
| Covestro Bayblend® T 65 Polycarbonate/ABS Blend High impact and notched impact strength, little risk of brittle fracture, high dimensional accuracy.Applications: Interior automotive components.Information provided by Bayer.As of 1 September 2015,.. |
|||
| Vicat Softening Point | 118 °C | 244 °F | ISO 306 |
| Total Lacqtene® 2002 TN 40 HDPE, blow molding, pipe, sheet
(discontinued **) LACQTENE® 2002 TN 40 is a high density polyethylene produced by the gas phase polymerization process with hexene as comonomer.Information provided provided by Total Petrochemicals.Total Petrochemic.. |
|||
| Vicat Softening Point | 118 °C @Load 1.00 kg |
244 °F @Load 2.20 lb |
ISO 306/A |
| Polimeri Europa Clearflex® RL 50 U Linear Medium Density Polyethylene Clearflex RL 50 U is a linear medium density polyethylene resin, with antioxidants and UV stabilizers, suitable for rotomolding applications.Items manufactured with Clearflex RL 50 U show good mecha.. |
|||
| Vicat Softening Point | 118 °C | 244 °F | ASTM D1525 |
| Albis Plastics Cellulose Acetate Butyrate B9424-3 , 3% Plasticizer
(discontinued **) Amorphous Cellulose Acetate Butyrate (CAB)Characteristics: Dimensional Stability, Weatherability and Low Temp Impact StrengthApplications: Pens, Ski Goggles, Auto Trim, Skylights, Tool Handles and T.. |
|||
| Vicat Softening Point | 118 °C | 244 °F | 120°C/hr, 9.8N; ASTM D1525 |
| Lubrizol Estane® 2102-55D Thermoplastic Polyurethane Elastomer Formerly PellethaneFeature: Load-bearing capacityAvailable in Americas, Europe, Middle East, Africa, India and AsiaData provided by Lubrizol.Lubrizol acquired the Pellethane product line from Dow in.. |
|||
| Vicat Softening Point | 118 °C | 244 °F | Rate B/50; ISO 306 |
| SABIC Innovative Plastics Xenoy® X6800BM PBT (Europe-Africa-Middle East) Blow moldable, impact modifed XENOY |
|||
| Vicat Softening Point | 118 °C | 244 °F | ISO 306 |
| Unipetrol PE HD LITEN® ZB 20 HDPE Made for blow molding, extrusion, and pipe applications.Information provided by Unipetrol RPA |
|||
| Vicat Softening Point | 118 °C | 244 °F | B/120; ISO 306 |
| Sax Polymers SAXALEN PPC345G30 Polypropylene Copolymer, 30% Glass Filled SAXALEN PPC345G30 is a 30% glass filled Polypropylene - Copolymer intended for injection molding.Information provided by SAX Polymers |
|||
Copyright © lookpolymers.com All Rights Reserved