- HOME
- POLYMER SEARCH
- Polymer Property : Vicat Softening Point = 121 °C
Polymer Property : Vicat Softening Point = 121 °C Product List
Thermal PropertiesTips: 30 items are displayed at most. For the rest of the results, please contact customer service.
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Vicat Softening Point | 121 °C | 250 °F | ISO 306/A50 |
| Premix Thermoplastics PRE-ELEC® PE 1297 Conductive Thermoplastic Compound PRE-ELEC® PE 1297 is a conductive thermoplastic compound based on PE-HD. Conductivity is achieved by using special conductive carbon black. In addition to a low electrical resistivity PRE-ELEC® PE.. |
|||
| Vicat Softening Point | 121 °C | 250 °F | Rate B/50; ISO 306 |
| SABIC Innovative Plastics GELOY HRA170D ASA+PC (Europe-Africa-Middle East) GELOY HRA170D resin is a PC-ASA blend with permanent antistatic behavior. It is typically used in applications that require antidust properties and high impact retention. Geloy HRA170D resin is typi.. |
|||
| Vicat Softening Point | 121 °C | 250 °F | Rate B/50; ASTM D1525 |
| SABIC Innovative Plastics GELOY XP4020R ASA+PC (Asia Pacific) ASA+PC may contain up to 20% post-industrial recycle. Excellent flow, weatherability, toughness and high heat for exterior uses. |
|||
| Vicat Softening Point | 121 °C | 250 °F | ASTM D1525 |
| Polymer Industries Densetec HDPE Rod Polymer Industries’ HDPE Rod exhibits all the durable qualities found in Densetec HDPE Sheet, making it perfect for that industrial application where sheet stock is not suitable. The HDPE Rod is av.. |
|||
| Vicat Softening Point | 121 °C | 250 °F | Compression Molded; ASTM D1525 |
| NOVA Chemicals Surpass® RMs539-U Octene sMDPE Rotational Molding Film Features: Octene copolymerExceptional low temperature impact propertiesOutstanding stiffnessBroad processing windowSuperior whiteness for improved part appearanceEasy mold releaseNSF listed for Stan.. |
|||
| Vicat Softening Point | 121 °C | 250 °F | Compression Molded; ASTM D1525 |
| NOVA Chemicals Surpass® RMs539-UG Octene sMDPE Rotational Molding Film Features: Octene copolymerExceptional low temperature impact propertiesOutstanding stiffnessBroad processing windowSuperior whiteness for improved part appearanceEasy mold releaseNSF listed for Stan.. |
|||
| Vicat Softening Point | 121 °C | 250 °F | ASTM D1525 |
| Chevron Phillips HiD® 9326 HDPE Natural Pipe Resin
(discontinued **) Resin Type: Linear Copolymer; PE3408 Pipe Resin; ASTM D 3350 Classification: 335440A; ASTM D 4976 Classification: PE 235, A 56606Applications:Base Resin for use in Oil Patch and Industrial Pipe Appl.. |
|||
| Vicat Softening Point | 121 °C | 250 °F | ASTM D1525 |
| NOVA Chemicals Novapol® HE-D250A HDPE Extrusion Resin
(discontinued **) Features: Excellent ESCR and toughness, good processability.Applications: conduit, corrugated pipe.Data provided by the manufacturer. |
|||
| Vicat Softening Point | 121 °C | 250 °F | ASTM D1525 |
| LyondellBasell Alathon® ETP H4837 High Density Polyethylene ApplicationsALATHON H 4837 is a high-flow “freezer†grade resin that exhibits enhanced cold temperature impact performance, enhanced processability and thermal stability, with good color a.. |
|||
| Vicat Softening Point | 121 °C | 250 °F | ISO 306 |
| Iran Petrochemical (PCC) MF3713 High Density Polyethylene MF3713 is a high molecular weight high density polyethylene.Applications: bags, products for use in property modification.Information provided by Iran Petrochemical Commercial Co. |
|||
| Vicat Softening Point | 121 °C | 250 °F | Rate B/50; ASTM D1525 |
| SABIC Innovative Plastics Xenoy® 1760 PBT+PC 11% Glass Reinforced PBT+PC alloy. Impact/chemical resistant. Excellent physical property retention in automotive exteriors. |
|||
| Vicat Softening Point | 121 °C | 250 °F | Rate B/50; ASTM D1525 |
| SABIC Innovative Plastics Xenoy® 1760E PBT+PC 11% Glass Reinforced alloy. Impact/chemical resistant. Excellent physical property retention in automotive exteriors. High flow version of Xenoy 1760 resin. |
|||
| Vicat Softening Point | 121 °C | 250 °F | Rate B/50; ISO 306 |
| SABIC Innovative Plastics XYLEX X8409AC PC+POLYESTER (Europe-Africa-Middle East) PC + Polyester, Injection (Blow) Molding, or Extrusion Blow molding grade, Chemical Resistance and Transparency |
|||
| Vicat Softening Point | 121 °C | 250 °F | 50°C/hr, 50N; ISO 306 |
| Teijin Multilon T-3011 Standard PC/ABS Polymer Alloy General grade of PC/ABS polymer alloy, having improved impact strength and heat resistance compared with a heat resistant ABS and flame retardant m-PPE and also having higher fluidity compared with .. |
|||
| Vicat Softening Point | 121 °C | 250 °F | Rate B/50; ISO 306 |
| SABIC Innovative Plastics Valox® V3900WX PBT+PC PBT/PC blend - Unreinforced - Flame Retardant. This is a UV-stabilized grade designed for outdoor enclosure applications requiring UL 746C F1 weatherability performance. |
|||
| Vicat Softening Point | 121 °C | 250 °F | ISO 306 |
| Total MDPE HT 514 Medium Density Polyethylene, Blown Film MDPE HT 514 is a medium density polyethylene produced by slurry loop low pressure process with hexene as co-monomer.MDPE HT 514 is a semi-high molecular weight polyethylene giving excellent mechanic.. |
|||
| Vicat Softening Point | 121 °C | 250 °F | Loading 1, Rate A; ASTM D1525 |
| Chevron Phillips Marlex® 9005 HDPE Injection Molding Resin Resin Type: Hexene CopolymerCharacteristics: Moderate flowExcellent impact strengthExcellent ESCRGood warpage resistanceApplications: Industrial partsSeatsFood and household containersAgricultural p.. |
|||
| Vicat Softening Point | 121 °C | 250 °F | ASTM D1525 |
| ExxonMobil Paxon™ BA50-100 Blow Molding Resin Product Description: BA50-100 is a high molecular weight, high density polyethylene copolymer. This resin has superior stress crack resistance, high impact strength and good rigidity.Availability: .. |
|||
| Vicat Softening Point | 121 °C | 250 °F | |
| Dow DOWLEX™ IP-40 High Density Polyethylene DOWLEX® IP-40 resin is an improved processing high density resin designed to offer excellent processability and impact resistance required for food container applications. This resin is designed by.. |
|||
| Vicat Softening Point | 121 °C | 250 °F | |
| Dow HDPE 42047N High Density Polyethylene DOW HDPE 42047N resin is a narrow molecular weight distribution copolymer designed to combine high impact strength and environmental stress crack resistance with excellent processability over a wide.. |
|||
| Vicat Softening Point | 121 °C @Load 0.999 kg |
250 °F @Load 2.20 lb |
ISO 306 |
| Arkema Group OREVAC® 18510P Grafted Maleic Anhydride Polyethylene OREVAC 18510P is a maleic anhydride grafted polyethylene used in the manufacturing of three layer MDPE or HDPE coating for steel pipeline. It is a powder product. OREVAC 18510P is mainly used in pip.. |
|||
| Vicat Softening Point | 121 °C @Load 1.02 kg |
250 °F @Load 2.25 lb |
ISO 306 |
| Arkema Group Pebax® Rnew 40R53 SP 01 Polyether Block Amide (PEBA) Polyether block amide Pebax® 40R53 SP 01 is a thermoplastic elastomer made of flexible polyether and rigid polyamide based on renewable resources. This SP grade has been developed to be heat and UV.. |
|||
| Vicat Softening Point | 121 °C @Load 1.02 kg |
250 °F @Load 2.25 lb |
ASTM-D1525 |
| Braskem GD5150K HDPE High Density Extrusion Polyethylene GD5150K is a high-density polyethylene specially developed for the manufacturing of insulation for wires and cables demanding high extrusion velocity. It has medium molar mass, shows good dielectric.. |
|||
| Vicat Softening Point | 121 °C @Load 1.02 kg |
250 °F @Load 2.25 lb |
ASTM-D1525 |
| Braskem GM5240PR HDPE High Density Extrusion Polyethylene GM5240PR is a high-density polyethylene compound specially developed for the manufacturing of pipes, underground conduits, and steel pipe coating. This resin is produced with bimodal technology and .. |
|||
| Vicat Softening Point | 121 °C | 250 °F | 50 N; ISO 306 |
| Azoty Tarnow™ TARNOFORM 200 HI4 POM Rubber modified grade with very high impact strength and damping capacity.Information provided by Zakłady Azotowe w Tarnowie-Moscicach S.A. |
|||
| Vicat Softening Point | 121 °C | 250 °F | ASTM D1525 |
| ExxonMobil Paxon™ BC50-100 Sheet Extrusion and Blow Molding Resin
(discontinued **) BC50-100 is a high molecular weight, high density polyethylene copolymer. This resin has superior stress crack resistance, high impact strength and good rigidity.Information provided by ExxonMobil .. |
|||
| Vicat Softening Point | 121 °C | 250 °F | ISO 306 |
| Total Lacqtene® 6002 FLG 42 HDPE film
(discontinued **) LACQTENE® 6002 FLG 42 is a medium density polyethylene resin with hexene as comonomer. This shows a broad molecular weight distribution ensuring outstanding processability. LACQTENE® 6002 FLG 42 h.. |
|||
| Vicat Softening Point | 121 °C | 250 °F | |
| Dow Pellethane® 2354-55D Polyurethane Elastomer, Polyester Polycaprolactone Based
(discontinued **) PELLETHANE® 2354-55D is elastomer is a polyester polycaprolactone based polyurethane elastomer used in automotive applications. It allows fast molding, and once molded can be painted with polyureth.. |
|||
| Vicat Softening Point | 121 °C | 250 °F | ASTM D1525 |
| ExxonMobil Paxon™ AG45-004 Blow Molding Resin
(discontinued **) AG45-004 is a blow molding high density polyethylene which offers exceptional stress crack resistance and impact performance. It contains an antistat which permits this resin to be used in all food.. |
|||
| Vicat Softening Point | 121 °C | 250 °F | B/50; ISO R306 |
| Samsung Cheil Industries Infino® HP-1011 PC/ABS, Unreinforced Material with superior flowability and small gas generation that can be used in the exterior material of mobile phonesInformation provided by Samsung Cheil Industries. |
|||
Copyright © lookpolymers.com All Rights Reserved