Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tear Strength | 29.0 kN/m | 165 pli | ISO 34-1 |
PolyOne OnFlex™ S KG 80A-3E2020 Thermoplastic Elastomer (TPE) OnFlex™-S KG thermoplastic elastomer compounds are based on hydrogenated styrenic block copolymers. This range of compounds are specially compatabilized to provide excellent adhesion to polyamide p.. |
|||
Tear Strength | 29.0 kN/m | 165 pli | Die B |
Momentive Performance Materials TSE 2267 Heat Cured Rubber - High Duro Translucent Heat cured rubber is a high consistency product that can be molded, extruded or calendered using conventional rubber processing equipment to meet a wide range of cost, durability and performance sta.. |
|||
Tear Strength | 29.0 kN/m | 165 pli | |
Shin-Etsu Silicones LIMSâ„¢ KE2095-40AB Elastomer KE-2095-40 is a selective self-adhesive liquid injection molding silicone. It is supplied as two components which are mixed in a 1:1 ratio to ensure easy and accurate blending. Its viscosity is lo.. |
|||
Tear Strength | 29.0 kN/m | 165 pli | Die C; Cross direction; ASTM D624 |
Teknor Apex Sarlink® 4165 Thermoplastic Elastomer A highly engineered Thermoplastic Elastomer for use in demanding applications. Sarlink® 4165 is a low hardness grade possessing exceptional tensile strength, superior compression set, chemical re.. |
|||
Tear Strength | 29.0 kN/m | 165 pli | Die C; Cross direction; ASTM D624 |
Teknor Apex Sarlink® 4465 Thermoplastic Elastomer A NSF certified, highly engineered Thermoplastic Elastomer for use in demanding applications. Sarlink® 4465 is a low hardness grade possessing exceptional tensile strength, superior compression s.. |
|||
Tear Strength | 29.0 kN/m | 165 pli | Press-cured 5 minutes at 190°C; ISO 34 |
DuPont Vamac® DP Sartomer 350 Coagent Test Compound Vamac® DP is an ethylene acrylic dipolymer elastomer. Its general performance characteristics are similar to those of the Vamac® terpolymers, including:Good oil and chemical resistanceHigh temper.. |
|||
Tear Strength | 29.0 kN/m | 165 pli | |
Trelleborg R940 Natural Rubber Polyisoprene All information provided by Trelleborg |
|||
Tear Strength | 29.0 kN/m | 165 pli | |
Trelleborg R848 Natural Rubber Polyisoprene All information provided by Trelleborg |
|||
Tear Strength | 29.0 kN/m | 165 pli | ASTM D624 |
ELASTO UK Dryflex® 650800 TPE, Improved Compression Set and High Temperature Resistance, 80A Hardness The VTC TPE Group have developed endless formulations to fulfill different properties and application requirements to optimize the finished component. This grade is designed with improved compressi.. |
|||
Tear Strength | 29.0 kN/m | 165 pli | ASTM D624 |
ELASTO UK Dryflex® 660700S SEBS Based Material, Semi-Filled Qualities, 70A Hardness, Natural The 660-series is recommended when the properties of the produced detail requires the advantages of the 500-series in combination with the 600-series. A semi-filled material can therefore combine t.. |
|||
Tear Strength | 29.0 kN/m | 165 pli | ASTM D624 |
ELASTO UK Dryflex® 662700S SEBS Based Material, Semi-Filled Qualities, 70A Hardness, Black The 660-series is recommended when the properties of the produced detail requires the advantages of the 500-series in combination with the 600-series. A semi-filled material can therefore combine t.. |
|||
Tear Strength | 29.0 kN/m | 165 pli | ASTM D624 |
ELASTO UK Mediprene™ 500600M TPE, Medical Applications, 60A Hardness All Mediprene™ compounds are designed and manufactured for use in medical and pharmaceutical applications. In both medical and food contact areas, high application demands are found, such as:Low e.. |
|||
Tear Strength | 29.0 kN/m | 165 pli | ASTM D 624 |
API Megol AM T A SEBS Adhesion Modified Overmolding for Polar Polymers Over-molding allows for the creation of composite finished products in a single phase, removing the need for successive gluing or mechanical fixing steps. This also reduces environmental impact as .. |
|||
Tear Strength | 29.0 kN/m | 165 pli | ISO 34-B |
AlphaGary Evoprene™ 3273 Standard SBS Thermoplastic Elastomer Compound |
|||
Tear Strength | 29.0 kN/m | 165 pli | ISO 34-B |
AlphaGary Evoprene™ G 958 SEBS Thermoplastic Elastomer Evoprene™ G compounds are styrene – ethylene butylene –styrene base thermoplastic elastomer with related hydrogenated block copolymers. These polymers are fully saturated so the resistance to oxi.. |
|||
Tear Strength | 29.0 kN/m | 165 pli | ISO 34-B |
AlphaGary Evoprene™ GC 5650 SEBS Thermoplastic Elastomer Evoprene™ GC compounds are based on styrene ethylene- butylene styrene block copolymers. Evoprene™ GC series was created to provide cost effective solutions for processors and end users alike. Can.. |