Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tear Strength | 33.3 kN/m | 190 pli | ASTM D624 |
PolyOne Dynaflex™ G7980-9 NSFG Thermoplastic Elastomer (TPE) Dynaflex™ G7980-9 NSFG is a NSF 51 (food equipment) approved material suitable for a wide variety of applications. -NSF 51 approved -FDA (see Notes) -Overmold Adhesion to Polypropylene -Soft Touch,.. |
|||
Tear Strength | 33.3 kN/m | 190 pli | ASTM D624 |
PolyOne Dynaflex™ G7980-9001-02 Thermoplastic Elastomer (TPE) Dynaflex™ G7980-9001-02 is an easy processing, general purpose TPE designed for a wide variety of applications, including those where FDA compliance is required. - Overmold Adhesion to Polypropylen.. |
|||
Tear Strength | 33.3 kN/m | 190 pli | Die C, 510 mm/min; ASTM D624 |
PolyOne Elastamax™ XL-2165 Thermoplastic Polyolefin Elastomer (TPO (POE)) PolyOne's Elastamax™ XL thermoplastic olefins (TPOs) are based on pelletized blends of polyolefin resins and select elastomers such EPDM. These materials have been engineered to provide a balance o.. |
|||
Tear Strength | 33.3 kN/m | 190 pli | ASTM D624 |
PolyOne Dynaflex™ G7980-1001-00 Thermoplastic Elastomer (TPE) Dynaflex™ processing, general purpose TPE designed for a wide variety of applications, including those where FDA compliance is required. - Overmold Adhesion to Polypropylene - Rubbery Feel - Soft T.. |
|||
Tear Strength | 33.3 kN/m | 190 pli | Die C, 510 mm/min; ASTM D624 |
PolyOne Geon™ Vinyl Flexible C6500 Polyvinyl Chloride, Flexible (PVC, Flexible) Information provided by PolyOne |
|||
Tear Strength | 33.3 kN/m | 190 pli | Die C |
TSE Industries Millathane® E34 Millable Polyether Polyurethane Rubber with 60 PHR Talc-Mistron Vapor MILLATHANE E34 is a high performance polyether polyurethane rubber for applications requiring: high abrasion resistance, low temperature flexibility, ozone resistance, oil and fuel resistance, outst.. |
|||
Tear Strength | 33.3 kN/m | 190 pli | ASTM D624 |
Multibase Multi-Flex® TEA 4001-65 TPO Thermoplastic Polyolefin Elastomer Forms: PelletsProcessing Methods:Injection MoldingInformation provided by Multibase |
|||
Tear Strength | 33.3 kN/m | 190 pli | ASTM D624 |
Multibase Multi-Flex® TPE A 5003 BLK Multi-Flex TPE contains Kraton™ G.Data provided by Multibase. |
|||
Tear Strength | 33.3 kN/m | 190 pli | ASTM D624 |
Multibase Multi-Flex® A 5703 TPE Thermoplastic Elastomer Features: Chemical Resistance, Good Heat StabilizedOzone ResistantGeneral PurposeForms:PelletsProcessing Method:Injection Molding Information provided by Multibase |
|||
Tear Strength | 33.3 kN/m | 190 pli | ASTM D624 |
Multibase Multi-Flex® A 7204 LC TPE Thermoplastic Elastomer Features: Chemical Resistance, Good Colorability, GoodElasticity, HighElectrically InsulatingFlame RetardantFlexibility, GoodHeat StabilizedOzone ResistantProcessability, GoodUV Resistance, Good .. |
|||
Tear Strength | 33.3 kN/m | 190 pli | ASTM D624 |
Multibase Multi-Flex® A 7321 TPE Thermoplastic Elastomer Features: Chemical Resistance, Good Colorability, GoodElasticity, HighElectrically InsulatingFlame RetardantFlexibility, GoodHeat StabilizedOzone ResistantUV Resistance, Good Processability, Good.. |
|||
Tear Strength | 33.3 kN/m | 190 pli | Die B; DCBP Cure |
Shin-Etsu Silicones SV-55002U High Strength Silicone Elastomer SV55002U is one of a series of silicone bases Type of HCR designed for applications requiring high strength. Product Features: Excellent mechanical properties.Typical Applications: Molding and Extru.. |
|||
Tear Strength | 33.3 kN/m | 190 pli | Die B; DBPH Cure |
Shin-Etsu Silicones SV-55002U High Strength Silicone Elastomer SV55002U is one of a series of silicone bases Type of HCR designed for applications requiring high strength. Product Features: Excellent mechanical properties.Typical Applications: Molding and Extru.. |
|||
Tear Strength | 33.3 kN/m | 190 pli | Die C; ASTM D624 |
Teknor Apex Telcar® TL-1520C Thermoplastic Elastomer Uses: Automotive Applications; Automotive Exterior Parts; Automotive Exterior Trim; Automotive Interior Parts; Blow Molding Applications; General Purpose; Grommets; Weatherstripping Forms: Pellets .. |
|||
Tear Strength | 33.3 kN/m | 190 pli | ASTM D624 |
Teknor Apex UNIPRENE® 7010-73 Thermoplastic Elastomer Information provided by Teknor Apex Company |
|||
Tear Strength | 33.3 kN/m | 190 pli | Trouser; ASTM D470 |
Lubrizol Estane® ETE 70DT3 Thermoplastic Polyurethane, Easy-to-Extrude Type: Estane® ETE 70DT3 is an aromatic polyether-based thermoplastic polyurethane (TPU).Features: Hard TPU with wide extrusion processing window and melt stability, low temperature flexibility, hig.. |
|||
Tear Strength | 33.3 kN/m | 190 pli | Trouser; ASTM D470 |
Lubrizol ESTANE® ETE50DS3 Ester Based Thermoplastic Polyurethane Features: Excellent physical and low temperature properties with very good chemical resistance and wide processing window for extrusion.Uses: Flat die/cast film and tubing extrusion and Injection an.. |
|||
Tear Strength | 33.3 kN/m | 190 pli | Trousers; ASTM D470 |
Lubrizol ESTANE® ETE50DT3 Ester Based Thermoplastic Polyurethane Features: Hard TPU with wide extrusion processing window and melt stability, low temperature flexibility, high transparency, UV stableUses: Extrusion: Hose and Tube, Profile, Cable Jacket; Injection.. |
|||
Tear Strength | 33.3 kN/m | 190 pli | |
Dow Corning SILASTIC® 94-595-HC SILICONE RUBBER PART A&B 30 Durometer, 2-part, 1 to 1 mix, translucent, Injection Moulding grade, Liquid Silicone Rubber.Information provided by Dow Corning |
|||
Tear Strength | >= 33.3 kN/m | >= 190 pli | Silicone Property; ASTM D624 |
Arlon 10502R020 0.020" (0.508 mm) Cured Silicone Rubber (Unsupported) Design/Construction:Material: Cured Silicone RubberLiner: Polyethylene Recommended Cure Cycle: Product delivered curedRecommended Post Cure Cycle: Product delivered post-curedAppearance: Red silicon.. |
|||
Tear Strength | 33.3 kN/m | 190 pli | ISO 34-1 |
Alliance Polymers Viprene™ G60A-32U-NAT Thermoplastic Vulcanizate Elastomer Viprene™ G60A-32U-NAT is a UV and Heat Stabilized TVP (Thermoplastic Vulcanizate Elastomer). This material can be easily processed by extrusion or injection molding. It exhibits easy flowing charac.. |
|||
Tear Strength | 33.3 kN/m | 190 pli | Die C; ASTM D624 |
Teknor Apex APEX® 3065-H Polyvinyl Chloride, Flexible Material Status-Commercial: ActiveAvailability-North AmericaTest Standards Available-ASTMFeatures-Good FlexibilityUses-General Purpose, ProfilesAppearance-Natural Color, OpaqueForms-PelletsProcessin.. |
|||
Tear Strength | 33.3 kN/m | 190 pli | Fill, Breaking Strength w/o Sizing |
3M Nextel™ AF-40 Industrial Woven Fabric 312 Information provided by 3M |
|||
Tear Strength | 33.3 kN/m | 190 pli | Fill, Breaking Strength w/o Sizing |
3M Nextel™ AF-62 Industrial Woven Fabric 312 Information provided by 3M |
|||
Tear Strength | 33.3 kN/m | 190 pli | Die C (graves), 20 in/min; ASTM D624 |
PolyOne Synprene® RT-3955 Thermoplastic Elastomer - SBC
(discontinued **) Description/Features:High Performance Thermoplastic ElastomerUV StabilizedNaturalApplications:Multi-PurposeMarket:AutomotiveBuilding and ConstructionConsumer GoodsIndustrialProcessing Method:Injecti.. |
|||
Tear Strength | 33.3 kN/m | 190 pli | Trouser; ASTM D470 |
Lubrizol ESTANE® 58277 Ester Based Thermoplastic Polyurethane Features: Excellent physical properties, good chemical resistance and wide processing window for extrusion.Uses: Blown and flat die/cast film extrusion and Injection and blow molding.Complies with: .. |
|||
Tear Strength | 33.3 kN/m | 190 pli | ASTM 4-624-54 D Die C |
BCC Products BC 8675E Polyurethane Elastomer BC 8675E is a multi-purpose elastomer that can perform many functions. Typical product features are: easy to use, cures at room temperature, resists moisture absorption, excellent in use for molds f.. |
|||
Tear Strength | 33.3 kN/m | 190 pli | ASTM D1004-03 |
Saint-Gobain Tygon® Tygoprene® XL-60 Pump Tubing Formulation Designed specifically for use in peristaltic pump applications, Tygoprene® Pump Tubing maintains a pump life of over 500 hours. It is extremely flexible and exhibits superior flex life, reducing do.. |